| Materials Science and Engineering |
| Fabrication of titanium-based alloys with bioactive surface oxide layer as biomedical implants: Opportunity and challenges |
Mohamad Rodzi SITI NUR HAZWANI, Ling Xin LIM, Zainovia LOCKMAN, Hussain ZUHAILAWATI |
1 |
| Structural transformation and energy analysis for pile-up dislocations at triple junction of grain boundary |
Ying-jun GAO, Zong-ji HUANG, Qian-qian DENG, KunLIAO, Yi-xuan LI, Xiao-Ai YI, Zhi-rong LUO |
45 |
| Enhanced thermal stability and mechanical properties of high-temperature resistant Al-Cu alloy with Zr and Mn micro-alloying |
Teng-teng SUN, Ji-wei GENG, Ze-yu BIAN, Yi WU, Ming-liang WANG, Dong CHEN, Nai-heng MA, Hao-wei WANG |
64 |
| Simulation on microstructure evolution of Al-Si alloy under effect of natural convection during solidification |
Zhen-hong WANG, Li-tong ZHANG, Bin SU, Xiao-peng ZHANG |
79 |
| Microstructure, strength and welding window of aluminum alloy-stainless steel explosive cladding with different interlayers |
S. SARAVANAN, K. RAGHUKANDAN |
91 |
| Microstructure, mechanical properties and wear resistance of SiCp/AZ91 composite prepared by vacuum pressure infiltration |
Zhi-ping GUAN, Ming-yu LI, Kai-xin XIA, Zhi-gang LI, Dan GAO, Po ZHAO, Pin-kui MA, Jia-wang SONG |
104 |
| Microstructure and mechanical properties of AZ31 alloy prepared by cyclic expansion extrusion with asymmetrical extrusion cavity |
Min-jie LIANG, Jie ZHENG, Huan LIU, Bao-xing YAO |
122 |
| Microstructure and corrosion behavior of as-homogenized and as-extruded Mg-xLi-3Al-2Zn-0.5Y alloys (x=4, 8, 12) |
Xiang PENG, Jia-wei SUN, Hong-jie LIU, Guo-hua WU, Wen-cai LIU |
134 |
| Effect of scratch on corrosion resistance of calcium phosphate conversion coated AZ80 magnesium alloy |
Xue-jiao JIA, Jiang-feng SONG, Xiao-rong QU, Fu-yong CAO, Bin JIANG, Andrej ATRENS, Fu-sheng PAN |
147 |
| Quantitative characterization of lamellar α precipitation behavior of IMI834 Ti-alloy in isothermal and non-isothermal heat treatments |
Xue-yan LIU, Hong-wei LI, Mei ZHAN, Hong-rui ZHANG |
162 |
| Theoretical and experimental investigation of Ti alloy powder production using low-power plasma torches |
Emre YURTKURAN, Rahmi üNAL |
175 |
| Standard heat treatment effects on TLP bonded IN-738LC superalloy using BNi-9 filler: An approach to make an ideal joint |
Danesh AMIRI, Ata KAMYABI-GOL, Seyed Abdolkarim SAJJADI |
192 |
| Effects of loading rate and peak load on nanoindentation creep behavior of DD407 Ni-base single crystal superalloy |
Zhen-nan ZHANG, Yun-li LI, Wen-ping WU |
206 |
| Effect of ECAP processing on distribution of second phase particles, hardness and electrical conductivity of Cu-0.81Cr-0.07Zr alloy |
Filipe CALDATTO DALAN, Gisele Ferreira de LIMA ANDREANI, Dilermando Nagle TRAVESSA, Ilshat Albertovich FAIZOV, Svetlana FAIZOVA, Kátia Regina CARDOSO |
217 |
| Ti3C2Tx MXene doped by W atoms for full-spectrum photofixation of nitrogen |
Qi LI, Ji-liang XU, San-mei WANG, Kai-fu YU, Wen-kun ZHU, Ting-ting HOU, Lan-tian ZHANG, Wen-hua ZHANG, Shu-quan LIANG, Liang-bing WANG |
233 |
| Alx/HKUST-1 prepared by synthetic exchange as catalyst for reduction of NO by CO at low temperature |
Li ZHANG, Jia-xiang ZHENG, Chao ZHANG, Yu-si WANG, Jing ZENG, Han-bing HE, Tie-chui YUAN, Yi-hong QIN, Ya-jie ZHENG |
251 |
| Enhancing storage performance of P2-type Na2/3Fe1/2Mn1/2O2 cathode materials by Al2O3 coating |
Yi-jiao CHANG, Guang-hui XIE, Yong-mao ZHOU, Jie-xi WANG, Zhi-xing WANG, Hua-jun GUO, Bian-zheng YOU, Guo-chun YAN |
262 |
| Mining, Minerals Processing and Metallurgical Engineering |
| Deep metallogenic mechanism in southeastern China based on receiver function data |
Jian-xin LIU, Syed muzyan SHAHZAD, Ya SUN, Asim SHAHZAD, Chuan LI, Meryem FANIDI,Ishfaque MUHAMMAD |
273 |
| Bearing mechanism and thickness optimization of ore roof in bauxite stope |
Shao-wei MA, Jian-hua HU, Ya-guang QIN, Qi-fan REN, Dong-jie YANG |
285 |
| Effective recovery of chalcopyrite at low temperatures using modified ester collector |
Xian-zhong BU, Yuan-yuan FENG, Ji-wei XUE, Lu YANG, Chong-hui ZHANG |
296 |
| Features and mechanisms of self-sintering of molybdenite during oxidative roasting |
Hu SUN, Guang-hui LI, Qun-zhen BU, Zhong-qiao FU, Hui-bo LIU, Xin ZHANG, Jun LUO, Ming-jun RAO, Tao JIANG |
307 |
| Hydrometallurgical process for extracting bismuth from by-product of lead smelting based on methanesulfonic acid system |
Tian-xiang NAN, Jian-guang YANG, Chao-bo TANG, Wen-chao WANG, Wei LONG, Ji-yuan YANG |
319 |
| Recovery of Fe, V, and Ti in modified Ti-bearing blast furnace slag |
Ji-qing HAN, Jing ZHANG, Jia-hao ZHANG, Xiao CHEN, Li ZHANG, Gan-feng TU |
333 |
| Nickel and aluminium recovery from spent reforming catalyst through selective leaching, crystallization and precipitation |
Naga Raju BATTI, N. R. MANDRE |
345 |
| Improving corrosion resistance of Cu-Al-based anodes in KF-AlF3-Al2O3 melts |
Sai Krishna PADAMATA, Andrey YASINSKIY, Aleksandr SHABANOV, Timofey BERMESHEV, You-jian YANG, Zhao-wen WANG, Dao CAO, Peter POLYAKOV |
354 |
| Copper and arsenic substance flow analysis of pyrometallurgical process for copper production |
Xue-yi GUO, Yuan-lin CHEN, Qin-meng WANG, Song-song WANG, Qing-hua TIAN |
364 |
