| Materials Science and Engineering |
| Thermal stability and precipitate microstructures of Al-Si-Mg-Er alloy |
Yi HE, Hai-hui XI, Wen-quan MING, Qin-qin SHAO, Ruo-han SHEN, Yu-xiang LAI, Cui-lan WU, Jiang-hua CHEN |
1 |
| Effect of alloying elements on thermal stability of nanocrystalline Al alloys |
Hany Rizk AMMAR, Muneer BAIG, Asiful Hossain SEIKH, Jabair Ali MOHAMMED |
11 |
| Quench sensitivity and microstructures of high-Zn-content Al-Zn-Mg-Cu alloys with different Cu contents and Sc addition |
Ying-hao PENG, Chong-yu LIU, Li-li WEI, Hong-jie JIANG, Zhen-jiang GE |
24 |
| Relationship among solution heating rate, mechanical properties, microstructure and texture of Al-Mg-Si-Cu alloy |
Xiao-feng WANG, Ming-xing GUO, Wen-fei PENG, Yong-gang WANG, Lin-zhong ZHUANG |
36 |
| Microstructural evolution, flow stress and constitutive modeling of Al-1.88Mg-0.18Sc-0.084Er alloy during hot compression |
Fu-rong CAO, Bin YIN, Si-yuan LIU, Lu SHI, Shun-cheng WANG, Jing-lin WEN |
53 |
| Wear behavior and dry sliding tribological properties of ultra-fine grained Al5083 alloy and boron carbide-reinforced Al5083-based composite at room and elevated temperatures |
Matin SAESSI, Ali ALIZADEH, Alireza ABDOLLAHI |
74 |
| Efficient energy absorption of functionally-graded metallic foam-filled tubes under impact loading |
M. SALEHI, S. M. H. MIRBAGHERI, A. JAFARI RAMIANI |
92 |
| Microstructure, mechanical properties and corrosion behavior of quaternary Mg-1Zn-0.2Ca-xAg alloy wires applied as degradable anastomotic nails |
Ying-zhong MA, De-xin WANG, Hong-xiang LI, Chang-lin YANG, Fu-song YUAN, Ji-shan ZHANG |
111 |
| Estimation of wear performance of AZ91 alloy under dry sliding conditions using machine learning methods |
Fatih AYDIN, Rafet DURGUT |
125 |
| Crystal plasticity based modeling of grain boundary sliding inmagnesium alloy AZ31B sheet |
Zi-han LI, Guo-wei ZHOU, Da-yong LI, Hua-miao WANG, Wei-qin TANG, Ying-hong PENG, Hatem S. ZUROB, Pei-dong WU |
138 |
| Effect of heat treatment conditions on ballistic behaviour of various zones of friction stir welded magnesium alloy joints |
S. DHARANI KUMAR, S. SURESH KUMAR |
156 |
| Microstructure and electrochemical corrosion behavior of selective laser melted Ti-6Al-4V alloy in simulated artificial saliva |
Jiang JU, Jing-jing LI, Min JIANG, Meng-ya LI, Li-xiang YANG, Kai-ming WANG, Chao YANG, Mao-dong KANG, Jun WANG |
167 |
| Design and characterization of Ti6Al4V/20CoCrMo-highly porous Ti6Al4V biomedical bilayer processed by powder metallurgy |
E. MIHALCEA, H. J. VERGARA-HERNáNDEZ, O. JIMENEZ, L. OLMOS, J. CHáVEZ, D. ARTEAGA |
178 |
| Improving hot corrosion resistance of aluminized TiAl alloy by anodization and pre-oxidation |
Yuan-tao HU, Lei ZHENG, Hao-jie YAN, Lian-kui WU, Xiang-jun LIN, Fa-he CAO, Mei-yan JIANG |
193 |
| Oxidation and hot corrosion behaviors of Nb-Si based ultrahigh temperature alloys at 900 °C |
Jia-hua HE, Xi-ping GUO, Yan-qiang QIAO |
207 |
| Mechanical properties and fracture mechanism of as-cast MnFeCoCuNix high-entropy alloys |
Cheng-yan ZHU, Hao WU, He-guo ZHU, Xiang-dong LI, Chun-lei TU, Zong-han XIE |
222 |
| Effect of Cr content on microstructure and properties of aged Cu-Cr-P alloys |
Jian WANG, Hong-tao ZHANG, Hua-dong FU, Jian-xin XIE |
232 |
| Preparation and properties of supersonic atmospheric plasma sprayed TiB2-SiC coating |
Ke ZOU, Jian-peng ZOU, Chun-ming DENG, Min LIU, Xue-zhang LIU, Rui-min ZHAO, Shun-hua LI, Ren-bo ZHU, Di GAO |
243 |
| Electrochemical lithium storage performance of three-dimensional foam-like biocarbon/MoS2 composites |
Bei-bei MA,Shui-jiao CHEN, Ye-wei HUANG, Zhen-zhen NIE, Xiao-bin QIU, Xiu-qiang XIE,Zhen-jun WU |
255 |
| Microemulsion synthesis of ZnMn2O4/Mn3O4 sub-microrods for Li-ion batteries and their conversion reaction mechanism |
Ting-ting FENG, Jian YANG, Si-yi DAI, Jun-chao WANG, Meng-qiang WU |
265 |
| Mining, Minerals Processing and Metallurgical Engineering |
| Simulation on release of heavy metals Cd and Pb in sediments |
Hong-jie YAN, He-yang ZHANG, Ya-jun SHI, Ping ZHOU, Huan LI, Dong-ling WU, Liu LIU |
277 |
| Leaching behaviors of calcium and magnesium in ion-adsorption rare earth tailings with magnesium sulfate |
Bo FAN, Long-sheng ZHAO, Zong-yu FENG, De-peng LIU, Wei-Qiang YIN, Zhi-qi LONG, Xiao-wei HUANG |
288 |
| Numerical simulation of liquid aluminum leakage in casting process |
Ling-yu KONG, Xiao-zhen LIU, Zhong-ning SHI, Tuo-fu LI, Zhao-wen WANG, Ai-min LIU |
297 |
| Interface kinetics modeling of binary alloy solidification by considering correlation between thermodynamics and kinetics |
Shu LI, Yu-bing ZHANG, Kang WANG, Feng LIU |
306 |
