| Materials Science and Engineering |
| Effect of Cu addition on microstructural evolution and hardening of mechanically alloyed Al-Ti-O in-situ composite |
A. S. PROSVIRYAKOV, A. I. BAZLOV, I. S. LOGINOVA |
1135 |
| Effect of Cu element on morphology of TiB2 particles in TiB2/Al-Cu composites |
Jing SUN, Xu-qin WANG, Yan CHEN, Fei WANG, Hao-wei WANG |
1148 |
| Phase evolution in AlSi20/8009 aluminum alloy during high temperature heating near melting point and cooling processes |
Hai-bin LIU, Hua-guang SU, Ding-fa FU, Fu-lin JIANG,Hui ZHANG |
1157 |
| Effects of melt spinning process parameters and wheel surface quality on production of 6060 aluminum alloy powders and ribbons |
Sultan ？ZTüRK, Sefa Emre SüNBüL, Kür？at ？C？N |
1169 |
| Optimization of mechanical properties using D-optimal factorial design of experiment: Electromagnetic stir casting process of A357-SiC nanocomposite |
Reza MOHAMMADI BADIZI, Amir PARIZAD, Mohsen ASKARI-PAYKANI, Hamid Reza SHAHVERDI |
1183 |
| High temperature tribological behaviors of aluminum matrix composites reinforced with solid lubricant particles |
V. V. MONIKANDAN, P. K. RAJENDRAKUMAR, M. A. JOSEPH |
1195 |
| Study on inhomogeneous cooling behavior of extruded profile with unequal and large thicknesses during quenching using thermo-mechanical coupling model |
Zhi-wen LIU, Jie YI, Shi-kang LI, Wen-jie NIE, Luo-xing LI, Guan WANG |
1211 |
| Effects of pre-deformation mode and strain on creep aging bend-forming process of Al-Cu-Li alloy |
Jian-guo TANG, Bo YU, Jin ZHANG, Fu-shun XU, Chong-jun BAO |
1227 |
| Experimental and numerical assessment of energy absorption capacity of thin-walled Al 5083 tube produced by PTCAP process |
A. HOSSEINI, D. RAHMATABADI, R. HASHEMI, H. AKBARI |
1238 |
| Effect of nano-sized Al2O3 reinforcing particles on uniaxial and high cycle fatigue behaviors of hot-forged AZ31B magnesium alloy |
M. DAREINI, A. H. JABBARI, M. SEDIGHI |
1249 |
| TLP bonding of Ti-6Al-4V to Al 2024 using thermal spray Babbitt alloy interlayer |
H. NAEIMIAN, M. A. MOFID |
1267 |
| Relationships between microhardness, microstructure, and grain orientation in laser-welded joints with different welding speeds for Ti6Al4V titanium alloy |
Zhen-zhen XU, Zhi-qiang DONG, Zhao-hui YU, Wen-ke WANG, Jian-xun ZHANG |
1277 |
| Effect of cold deformation and heat treatment on microstructure and mechanical properties of TC21 Ti alloy |
Ramadan N. ELSHAER, Khaled M. IBRAHIM |
1290 |
| Tribocorrosion behaviour of Ti6Al4V under various normal loads in phosphate buffered saline solution |
R. YAZDI, H. M. GHASEMI, M. ABEDINI, C. WANG, A. NEVILLE |
1300 |
| Improvement of microstructure and mechanical properties of TiAl-Nb alloy by adding Fe element |
Yong YANG, He-ping FENG, Qi WANG, Rui-run CHEN, Jing-jie GUO, Hong-sheng DING, Yan-qing SU |
1315 |
| Mechanically-induced martensite transformation of NiTiFe shape memory alloy subjected to plane strain compression |
Shu-yong JIANG, Jun-bo YU, Yan-qiu ZHANG, Xiao-dong XING |
1325 |
| Influence of Al addition on microstructures of Cu-B alloys and Cu-ZrB2 composites |
Hai-min DING, Wen-zhi MIAO, Xiao-wei HUANG, Qing LIU, Xiao-liang FAN, Hui-qiang WANG, Kai-yu CHU, Chun-yan LI |
1335 |
| Mining, Minerals Processing and Metallurgical Engineering |
| Cross-scale characteristics of backfill material using NMR and fractal theory |
Jian-hua HU, Qi-fan REN, Dong-jie YANG, Shao-wei MA, Jun-long SHANG, Xiao-tian DING, Zhou-quan LUO |
1347 |
| Determination of Fe and Zn contents and distributions in natural sphalerite/marmatite by various analysis methods |
Hao LAI, Jiu-shuai DENG, Zi-long LIU, Shu-ming WEN, Ling-yun HUANG |
1364 |
| Application of modified sepiolite as reusable adsorbent for Pd(II) sorption from acidic solutions |
Yong XIAO, Ning-ning FENG, Run-hua WANG, Hai-gang DONG, Zi-wen GUO, Hao CUI, Hai-yan WU, Xin-xing LIU, Jian-ping XIE |
1375 |
| Chlorine inclusion mechanism in high purity copper electrorefining from nitric acid system |
Hua-zhen CAO, Wen-yu FENG, Hui-bin ZHANG, Guo-qu ZHENG |
1387 |
| Preparation of hexagonal and amorphous chromium oxyhydroxides by facile hydrolysis of KxCrOy |
Shu-ting LIANG, Hong-ling ZHANG, Hong-bin XU |
1397 |
| Possibilities and prospects for producing silumins with different silicon contents using amorphous microsilica |
M. P. KUZ′MIN, M. Yu. KUZ′MINA, P. B. KUZ′MIN |
1406 |
| Anodic process on Cu-Al alloy in KF-AlF3-Al2O3 melts and suspensions |
Sai Krishna PADAMATA, Andrey S. YASINSKIY, Petr V. POLYAKOV |
1419 |
