Materials Science and Engineering |
Effect of melt holding on morphological evolution and sedimentation behavior of iron-rich intermetallic phases in Al-Si-Fe-Mn-Mg alloy |
Dong-fu SONG, Shun-cheng WANG, Yu-liang ZHAO, Shu-hong LIU, Yong DU, Yue-hua KANG, Zhi WANG, Wei-wen ZHANG |
1 |
2024 aluminum alloy ultrahigh-strength sheet due to two-level nanostructuring under cryorolling and heat treatment |
Stanislav KRYMSKIY, Oleg SITDIKOV, Elena AVTOKRATOVA, Michael MARKUSHEV |
14 |
Effects of strain rate on mechanical properties, microstructure and texture of Al-Mg-Si-Cu alloy under tensile loading |
Xiao-feng WANG, Tong-ya SHI, He-bin WANG, Song-ze ZHOU, Wen-fei PENG, Yong-gang WANG |
27 |
Biaxial mechanical behavior of closed-cell aluminum foam under combined shear-compression loading |
Zhi-bin LI, Xue-yan LI, Yu-xuan ZHENG |
41 |
Mechanical properties and microstructure evolution in incremental forming of AA5754 and AA6061 aluminum alloys |
Ghulam HUSSAIN, Muhammad ILYAS, B. B. LEMOPI ISIDORE, Wasim A. KHAN |
51 |
Microstructure, mechanical properties and two-body abrasive wear behaviour of hypereutectic Al-Si-SiC composite |
Raj Kumar SINGH, Amit TELANG, Satyabrata DAS |
65 |
Effects of welding parameters and welding sequence on residual stress and distortion in Al6061-T6 aluminum alloy for T-shaped welded joint |
Amirreza KHOSHROYAN, Armin Rahmati DARVAZI |
76 |
Evaluation of nanometer-sized zirconium oxide incorporated Al-Mg-Ga-Sn alloy as anode for alkaline aluminum batteries |
Mortaza AFSHARI, Robab ABBASI, Mohammad Reza SOVIZI |
90 |
Microstructure and strengthening mechanism of Mg-5.88Zn-0.53Cu-0.16Zr alloy solidified under high pressure |
Kun-yu GUO, Chang XU, Xiao-ping LIN, Jie YE, Chong ZHANG, Duo HUANG |
99 |
Effects of punch velocity on microstructure and tensile properties of thixoforged Mg2Sip/AM60B composite |
Su-qing ZHANG, Ti-jun CHEN, Ji-xue ZHOU |
110 |
Zinc-doped hydroxyapatite-zeolite/polycaprolactone composites coating on magnesium substrate for enhancing in-vitro corrosion and antibacterial performance |
Nida IQBAL, Saman IQBAL, Tanveer IQBAL, H. R. BAKHSHESHI-RAD, Ahmed ALSAKKAF, Ahmad KAMIL, Mohammed Rafiq ABDUL KADIR, Mohd Hasbullah IDRIS, H. Balaji RAGHAV |
123 |
Hot deformation behavior of Ti-6Al-4V-0.1Ru alloy during isothermal compression |
Yu-feng XIA, Wei JIANG, Qian CHENG, Lai JIANG, Li JIN |
134 |
High pressure EIGA preparation and 3D printing capability of Ti-6Al-4V powder |
Kuai-kuai GUO, Chang-sheng LIU, Sui-yuan CHEN, Huan-huan DONG, Si-yu WANG |
147 |
Microstructure and high-temperature mechanical properties of laser beam welded TC4/TA15 dissimilar titanium alloy joints |
Wei-feng XU, Jun MA, Yu-xuan LUO, Yue-xiao FANG |
160 |
Induced antibacterial capability of TiO2 coatings in visible light via nitrogen ion implantation |
Li ZHENG, Shi QIAN, Xuan-yong LIU |
171 |
Indentation size effect of germanium single crystal with different crystal orientations |
NingLIU, Xiao-jing YANG, Zheng YU, Lei ZHAO |
181 |
Structural, optical properties and optical modelling of hydrothermal chemical growth derived ZnO nanowires |
Hin On CHU, Quan WANG, Yong-jing SHI, Shi-geng SONG, Wei-guo LIU, Shun ZHOU, Des GIBSON, Yahya ALAJLANI, Cheng LI |
191 |
Mining, Minerals Processing and Metallurgical Engineering |
Photogenerated-hole scavenger for enhancing photocatalytic chalcopyrite bioleaching |
Bao-jun YANG, Wen LUO, Qi LIAO, Jian-yu ZHU, Min GAN, Xue-duan LIU, Guan-zhou QIU |
200 |
Preparation and characterization of Martian soil simulant NEU Mars-1 |
Jin-zhao GUAN, Ai-min LIU, Kai-yu XIE, Zhong-ning SHI, Blanka KUBIKOVA |
212 |
Separation of arsenic from arsenic-antimony-bearing dust through selective oxidation-sulfidation roasting with CuS |
Da-peng ZHONG, Lei LI |
223 |
Adsorption behavior of Sb(III) in single and binary Sb(III)-Fe(II) systems on cationic ion exchange resin: Adsorption equilibrium, kinetic and thermodynamic aspects |
F. MOGHIMI, A. H. JAFARI, H. YOOZBASHIZADEH, M. ASKARI |
236 |
Experiment and numerical simulation of two-phase flow in oxygen enriched side-blown furnace |
Yan-ting LIU, Tian-zu YANG, Zhuo CHEN, Zhen-yu ZHU, Ling ZHANG, Qing HUANG |
249 |
Synergistic inhibition effect of poly(ethylene glycol) and cetyltrimethylammonium bromide on corrosion of Zn and Zn-Ni alloys for alkaline batteries |
Hany M. ABD EL-LATEEF, Mahmoud ELROUBY |
259 |