| Materials Science and Engineering |
| Recent progress in Mg-Li matrix composites |
Yue-hua SUN, Ri-chu WANG, Chao-qun PENG, Yan FENG, Ming YANG |
1 |
| Distribution and evolution of aging precipitates in Al-Cu-Li alloy with high Li concentration |
Jin-feng LI, Jia-lei HUANG, Dan-yang LIU, Yong-lai CHEN, Xu-hu ZHANG, Peng-cheng MA |
15 |
| Experimental determination of 800 °C isothermal section in Al-Zn-Zr ternary system |
Yong-xiong LIU, Fu-cheng YIN, Zhi LI, Xue-mei OUYANG, Liang-ping CHEN |
25 |
| Contrasting initial events of localized corrosion on surfaces of 2219-T42 and 6061-T6 aluminum alloys exposed in Caribbean seawater |
Gloria ACOSTA, Lucien VELEVA, Juan Luis LóPEZ, D. A. LóPEZ-SAURI |
34 |
| Spatial interfacial heat transfer and surface characteristics during gravity casting of A356 alloy |
Jia-hua LIN, Hai-dong ZHAO, Jia-min HUANG |
43 |
| Microstructures and mechanical properties of AZ91D/0Cr19Ni9 bimetal composite prepared by liquid-solid compound casting |
Jian-hua ZHAO, Wen-qun ZHAO, Shen QU, Yan-qing ZHANG |
51 |
| Effect of heat treatment processing on microstructure and tensile properties of Ti-6Al-4V-10Nb alloy |
Hong SUN, Li-ming YU, Yong-chang LIU, Li-ye ZHANG, Chen-xi LIU, Hui-jun LI, Jie-feng WU |
59 |
| Effects of welding parameters on weld shape and residual stresses in electron beam welded Ti2AlNb alloy joints |
Yan-jun LI, Ai-ping WU, Quan LI, Yue ZHAO, Rui-can ZHU, Guo-qing WANG |
67 |
| Equivalent strain hardening exponent of anisotropic materials based on spherical indentation response |
Yu HUI, Jian-jun WU, Ming-zhi WANG, Xue-peng ZHAN, He FAN |
77 |
| Surface finish effect on dry sliding wear behavior of thermally oxidized commercially pure zirconium |
A. ALANSARI, Y. SUN |
88 |
| Cellular automaton simulation of dynamic recrystallization behavior in V-10Cr-5Ti alloy under hot deformation conditions |
Zhuo-han CAO, Yu SUN, Chen ZHOU, Zhi-peng WAN, Wen-hua YANG, Li-li REN, Lian-xi HU |
98 |
| Bulging in incremental sheet forming of cold bonded multi-layered Cu clad sheet: Influence of forming conditions and bending |
Khalid A. AL-GHAMD, G. HUSSAIN |
112 |
| Tribological properties and thermal-stress analysis of C/C-SiC composites during braking |
Guan-yi CHEN, Zhuan LI, Peng XIAO, Xi OUYANG, Wen-jie MA, Peng-tao LI, Jin-wei LI, Yang LI |
123 |
| Effects of TiB2+TiC content on microstructure and wear resistance of Ni55-based composite coatings produced by plasma cladding |
Xin-jie ZHANG, Hong-zhi CUI, Jia-feng WANG, Guo-song ZHANG, Yu-qiao ZHAO, Kang SUN |
132 |
| High performance room temperature gas sensor based on novel morphology of zinc oxide nanostructures |
Naila ZUBAIR, Khalida AKHTAR |
143 |
| Microstructure and photocatalytic activity of Ni-doped ZnS nanorods prepared by hydrothermal method |
Wen-hua ZHAO, Zhi-qiang WEI, Xiao-juan WU, Xu-dong ZHANG, Li ZHANG, Xuan WANG |
157 |
| Mining, Minerals Processing and Metallurgical Engineering |
| Numerical simulation of hydrothermal mineralization associated with simplified chemical reactions in Kaerqueka polymetallic deposit, Qinghai, China |
Yan-hong ZOU, Yao LIU, Yong PAN, Kuan-da YANG, Ta-gen DAI, Xian-cheng MAO, Jian-qing LAI, Hai-long TIAN |
165 |
| Mechanism and application on sulphidizing flotation of copper oxide with combined collectors |
Wan-zhong YIN, Qian-yu SUN , Dong LI, Yuan TANG, Ya-feng FU, Jin YAO |
178 |
| Reaction behavior of kaolinite with ferric oxide during reduction roasting |
Xiao-bin LI, Hong-yang WANG, Qiu-sheng ZHOU, Tian-gui QI, Gui-hua LIU, Zhi-hong PENG, Yi-lin WANG |
186 |
| Low-temperature phase transitions of sodium aluminate solutions |
Wei LIU, Zhou-lan YIN, Zhi-ying DING |
194 |
| Carbothermic reduction of chromite fluxed with aluminum spent potlining |
Dawei YU, Dogan PAKTUNC |
200 |
| Cold model on bubble growth and detachment in bottom blowing process |
Hong-jie YAN, Jun-bing XIAO, Yan-po SONG, Zhi-wen HU, Zhi-kai TAN, Liu LIU |
213 |
| Electrodeposition of nickel from alkaline NH4OH/NH4Cl buffer solutions |
Piotr M. SKITA？, Przemys？aw T. SANECKI, Dorota SALETNIK, Jan KALEMBKIEWICZ |
222 |
