中国有色金属学报2017年第27卷第5期-《中国有色金属学报》官方网站|全网首发

您目前所在的位置：首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第27卷第5期 2017年5月

材料科学与工程
固溶处理对7B52铝合金板材力学性能和断裂行为的影响	祝国川¹，熊柏青¹，佟有志²，张永安¹，黄树晖¹，李志辉¹，李锡武¹，李明原¹	877
Fe含量对挤压铸造Al-Cu合金组织演变及高温力学性能的影响	林波¹，张卫文²	885
新型Mg-Bi-Al-Zn变形镁合金的微观组织与力学性能	孟帅举¹，余晖^{1, 4}，崔红卫²，张静³，赵维民¹，王志峰¹，秦春玲¹	894
Al6061板料的修正GTN损伤模型	韩晓兰¹，赵升吨¹，徐凡¹，陈超¹，赵仁峰²	902
含Mo单晶镍基合金的高温蠕变及损伤行为	梁爽^{1, 2}，田素贵¹，刘智鑫^{1, 2}，薛永超¹	911
冷却方式对TC21钛合金绝热剪切敏感性的影响	杨红斌^{1, 2}，向文丽²，徐媛²，孙坤²	920
FeSiB非晶薄带激光焊接头组织及晶化行为	龚玉兵¹，王善林¹，李宏祥²，张子阳¹，陈玉华¹	927
AlTiN-Cu涂层的组织结构和性能	易继勇^{1, 2}，潘晨曦^{1, 2}，陈康华^{1, 2}，徐银超^{1, 2, 3}，王云志³，陈浩^{1, 2} 祝昌军^{1, 2}	935
W-(Ni-Cr-Fe-Si-B)混合粉末中间层真空扩散钎焊连接钨与钢	杨宗辉^{1, 2}，沈以赴³，初雅杰^{1, 2}，李晓泉^{1, 2}	941
BaZrO₃耐火材料在富钛熔体中的侵蚀机理	陈光耀¹，李宝同¹，张浩¹，高鹏越¹，秦子威¹，鲁雄刚^{1, 2}，李重河^{1, 2}	947
NbTi-NiTi原位复合材料的约束态相变阻尼	姜江¹，蒋小华²，姜大强²，郝世杰²，郭方敏²，崔立山²，张林伟¹	953
Lu-F共掺杂ZnO光电性质的第一性原理计算	张明举^{1, 2}，李文明^{1, 2}，郑树凯^{1, 2}	960
粘结相含量和相组成对Mo₂FeB₂基金属陶瓷断裂韧性的影响	赵迪¹，余海洲¹，李阳¹，孙彩红¹，刘文俊¹，郑勇²	967
共沉淀法制备Eu³⁺掺杂La₃PO₇荧光材料及其性能	欧娅^{1, 2}，付兵^{1, 2}，朱莉萍³，陈雪羽¹，杨锦瑜^{1, 2}	974
含钛炭阳极直接电解制备低钛铝合金	黎志英^{1, 2}，张念炳³，温良英¹	981
15-5PH不锈钢的时效硬化行为及耐蚀性能	彭新元^{1, 2}，周贤良^{1, 2}，华小珍^{1, 2}	988
矿业工程 • 冶金工程 • 化学与化工
重力梯度张量种植反演	曹书锦^{1, 2, 3}，朱自强²，鲁光银²	997
崩落法回采巷道顶板危险区域确定的解构法和数值模拟法	陈庆发¹，牛文静¹，郑文师¹，刘俊广¹，刘严中²，尹庭昌¹	1006
温度和气压对某金属矿山尾矿坝中毛细水上升规律的影响	章求才¹，田亚坤¹，张志军¹，李亚俊²，刘玄钊³，贺桂成¹，刘永¹	1016
基于结构离散的复杂水平采空区群残采激励动力响应	姜立春¹，曾俊佳²，吴爱祥³	1023
甲基纤维素的应激反应及其对滑石浮选的影响	冯博^{1, 2}，朱贤文¹，彭金秀¹	1031
全湿法短流程高纯银的制备工艺	汪秋雨^{1, 3}，何强¹，胡意文¹，王日¹，黄绍勇²，吕喜聪²，孙敬韬²，蔡琥³	1037
含铟铁矾渣焙烧水浸法回收锌和铟	张魁芳，刘志强，戴子林，高丽霞	1045
焦化废水还原浸出软锰矿动力学	冯雅丽¹，康金星¹，李浩然²，邓祥意¹，孙铭¹	1051
辉锑矿铁源固硫还原熔炼直接炼锑	徐康宁¹，陈永明²，王岳俊¹，薛浩天²，叶龙刚²，张文博¹	1061
脉冲参数对LiCl-NaCl-KCl-TiCl_x熔盐体系沉积钛的影响	张龙，朱骏，宋阳，卢建红，焦树强	1068

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 27 No. 5 May 2017

Materials Science and Engineering
Effect of solution treatment on mechanical properties and fracture behavior of 7B52 aluminum alloy plate	ZHU Guo-chuan, XIONG Bai-qing, TONG You-zhi, ZHANG Yon-gan,HUANG Shu-hui, LI Zhi-hui, LI Xi-wu, LI Ming-yuan	877
Effects of Fe content on microstructure evolution and elevated-temperature mechanical properties of squeeze cast Al-Cu alloys	LIN Bo, ZHANG Wei-wen	885
Microstructure and mechanical properties of new Mg-Bi-Al-Zn wrought magnesium alloy	MENG Shuai-ju, YU Hui, CUI Hong-wei, ZHANG Jing, ZHAO Wei-min, WANG Zhi-feng, QIN Chun-ling	894
Modified GTN-Hill1948 damage model of Al6061 panel	HAN Xiao-lan, ZHAO Sheng-dun, XU Fan, CHEN Chao, ZHAO Ren-feng	902
Creep and damage behavior of containing Mo nickel-based single crystal superalloy at high temperature	LIANG Shuang, TIAN Su-gui, LIU Zhi-xin, XUE Yong-chao	911
Effect of cooling ways on adiabatic shear sensitivity of TC21 titanium alloy	YANG Hong-bin, XIANG Wen-li, XU Yuan, SUN Kun	920
Microstructure and crystallization behaviour of laser welding FeSiB amorphous ribbon joint	GONG Yu-bing, WANG Shan-lin, LI Hong-xiang, ZHANG Zi-yang, CHEN Yu-hua	927
Microstructure and properties of AlTiN-Cu coating	YI Ji-yong, PAN Chen-xi, CHEN Kang-hua, XU Ying-chao WANG Yun-zhi, CHEN Hao, ZHU Chang-jun	935
Vacuum diffusion brazing bonding tungsten to steel using W-(Ni-Cr-Fe-Si-B) mixed powders interlayer	YANG Zong-hui, SHEN Yi-fu , CHU Ya-jie, LI Xiao-quan	941
Corrosion mechanism of BaZrO₃ refractory in titanium enrichment melt	CHEN Guang-yao, LI Bao-tong, ZHANG Hao, GAO Peng-yue, QIN Zi-wei, LU Xiong-gang, LI Chong-he	947
Constraint transformation damping behavior of in-situ NbTi-NiTi composite	JIANG Jiang, JIANG Xiao-hua, JIANG Da-qiang, HAO Shi-jie, GUO Fang-min, CUI Li-shan, ZHANG Lin-wei	953
First-principles calculations on electronic and optical properties of ZnO codoped with Lu-F	ZHANG Ming-ju, LI Wen-ming, ZHENG Shu-kai	960
Effect of binder phase contents and compositions on fracture toughness of Mo₂FeB₂ based cermets	ZHAO Di, YU Hai-zhou, LI Yang, SUN Cai-hong, LIU Wen-jun, ZHENG Yong	967
Co-precipitation synthesis and optical properties of Eu³⁺ doped La₃PO₇ phosphors	OU Ya, FU Bing, ZHU Li-ping, CHEN Xue-yu, YANG Jin-yu	974
Preparation of low titanium aluminum alloy by direct reduction of TiO₂-containing carbon anode	LI Zhi-ying, ZHANG Nian-bing, WEN Liang-ying	981
Aging hardening behavior and corrosion resistance of 15-5PH stainless steel	PENG Xin-yuan, ZHOU Xian-liang, HUA Xiao-zhen	988
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
Planting inversion of tensor gravity data	CAO Shu-jin, ZHU Zi-qiang, LU Guang-yin	997
Deconstruction method and numerical simulation method of determination of tunnel roof’s dangerous area in caving stoping process	CHEN Qing-fa, NIU Wen-jing, ZHENG Wen-shi, LIU Jun-guang, LIU Yan-zhong, YIN Ting-chang	1006
Influence of temperature and air pressure on rising law of capillary water in tailings dam of metal mine	ZHANG Qiu-cai, TIAN Ya-kun, ZHANG Zhi-jun, LI Ya-jun, LIU Xuan-zhao, HE Gui-cheng, LIU Yong	1016
Dynamic response of complicated horizontal goaf group under residual mining excitation based on structural discrete	JIANG Li-chun, ZENG Jun-jia, WU Ai-xiang	1023
Stimulus response of methylcellulose and its depression effect on talc flotation	FENG Bo, ZHU Xian-wen, PENG Jin-xiu	1031
Preparation technology of hydrometallurgical process high purity sliver powder	WANG Qiu-yu, HE Qiang, HU Yi-wen, WANG Ri, HUANG Shao-yong, Lü Xi-cong, SUN Jing-tao, CAI Hu	1037
Recovery of Zn and In from ammonium jarosite residue bearing indium by roasting - water leaching method	ZHANG Kui-fang, LIU Zhi-qiang, DAI Zi-lin, GAO Li-xia	1045
Leaching kinetics of pyrolusite ores using coking wastewater as reductant	FENG Ya-li, KANG Jin-xing, LI Hao-ran, DENG Xiang-yi, SUN Ming	1051
Reducing and sulfur-fixing smelting of stibnite to produce antimony by one-step using iron materials as sulfur-fixing agent	XU Kang-ning, CHEN Yong-ming, WANG Yue-jun, XUE Hao-tian, YE Long-gang, ZHANG Wen-bo	1061
Influence of pulsed parameters on titanium electrodeposited from LiCl-NaCl-KCl-TiCl_x molten salt	ZHANG Long, ZHU Jun, SONG Yang, LU Jian-hong, JIAOShu-qiang	1068

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW