| Structural Materials |
| Grain refinement mechanism of as-cast aluminum by hafnium |
Hong-ying LI, De-wang LI, Zhi-xiang ZHU, Bao-an CHEN, Xin CHEN, Chang-long YANG, Hong-yu ZHANG, Wei KANG |
3059 |
| Microstructure evolution and mechanical properties of rheo-processed ADC12 alloy |
Zhao-hua HU, Xiang PENG, Guo-hua WU, Da-qiang CHENG, Wen-cai LIU, Liang ZHANG, Wen-jiang DING |
3070 |
| Significant improvements in mechanical properties of AA5083 aluminum alloy using dual equal channel lateral extrusion |
N. FAKHAR, F. FERESHTEH-SANIEE, R. MAHMUDI |
3081 |
| Combined effects of ECAP and subsequent heating parameters on semi-solid microstructure of 7075 aluminum alloy |
Ramin MESHKABADI, Ghader FARAJI, Akbar JAVDANI, Vahid POUYAFAR |
3091 |
| Effect of post weld heat treatment on microstructure and mechanical properties of gas tungsten arc welded AA6061-T6 alloy |
Firouz FADAEIFARD, Khamirul Amin MATORI, Farhad GARAVI, Muath Al-FALAHI, Gholamreza Vahedi SARRIGANI |
3102 |
| Hot tearing susceptibility of Mg-xZn-2Y alloys |
Zhi WANG, Yi-zhou LI, Feng WANG, Yuan-ding HUANG, Jiang-feng SONG, Ping-li MAO, Zheng LIU |
3115 |
| Hot deformation behaviors and processing maps of Mg-Zn-Er alloys based on Gleeble-1500 hot compression simulation |
Cui-cui SUN, Ke LIU, Zhao-hui WANG, Shu-bo LI, Xian DU, Wen-bo DU |
3123 |
| Microstructure and mechanical properties of laser beam welded TC4/TA15 dissimilar joints |
Wei-feng XU, Zhen-lin ZHANG |
3135 |
| Functional Materials |
| Thermal properties of closed-cell aluminum foams prepared by melt foaming technology |
Hui WANG, Xiang-yang ZHOU, Bo LONG, Juan YANG, Hong-zhuan LIU |
3147 |
| Dynamic indentation response of porous SiC/Ti-based metallic glass composite |
Ben-peng WANG, Lu WANG, Yun-fei XUE, Yang-wei WANG, Hai-feng ZHANG, Hua-meng FU |
3154 |
| Effect of carburization on microstructure and rolling contact fatigue property of 95W-3.4Ni-1.6Fe heavy alloy |
Guang-hong WANG, Sheng-guan QU, Rui-liang HE, Ke HU, Xiao-qiang LI |
3161 |
| Effect of carbon nanotube and silicon carbide on microstructure and dry sliding wear behavior of copper hybrid nanocomposites |
H. M. MALLIKARJUNA, C. S. RAMESH, P. G. KOPPAD, R. KESHAVAMURTHY, K. T. KASHYAP |
3170 |
| Microstructure and properties of Cu-3Ti-1Ni alloy with aging process |
Jia LIU, Xian-hui WANG, Qian-ni RAN, Gang ZHAO, Xiu-xiu ZHU |
3183 |
| Ethanol sensing properties of Bi3.15Nd0.85Ti3O12 films at low operating temperatures |
Hong JIANG, Yong ZHANG |
3189 |
| Effect of Fe content on microstructure and mechanical properties of Cu-Fe-based composite coatings by laser induction hybrid rapid cladding |
Sheng-feng ZHOU, Jian-bo LEI, Zheng XIONG, Jin-bo GUO, Zhen-jie GU, Hong-bo PAN |
3196 |
| Formation and characterization of self-lubricated carbide layer on AA6082 Al-Mg-Si aluminum alloy by electrical discharge alloying process |
Wang-Chih Chen, Hung-Mao Lin, Jun-Yen Uan |
3205 |
| Effects of spinning rate on structures and electrochemical hydrogen storage performances of RE-Mg-Ni-Mn-based AB2-type alloys |
Yang-huan ZHANG, Wei ZHANG, Xi-ping SONG, Pei-long ZHANG, Yong-guo ZHU, Yan QI |
3219 |
| Facile synthesis of porous LiNiVO4 powder as high-voltage cathode material for lithium-ion batteries |
Mu-lan QIN, Wan-min LIU, Shu-quan LIANG, An-qiang PAN |
3232 |
| Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
| Self-magnetization of pyrite and its application in flotation |
Xi-qing WU, Xin XIE, Yang-fan CAO |
3238 |
| Flotation behaviors and mechanisms of chalcopyrite and galena after cyanide treatment |
Yi-wen MA, Yue-xin HAN, Yi-min ZHU, Yan-jun LI, Hao LIU |
3245 |
| Effect and mechanism of octanol in cassiterite flotation using benzohydroxamic acid as collector |
Lei SUN, Yue-hua HU, Wei SUN |
3253 |
| Selective extraction of gold (III) from hydrochloric acid-chlorine gas leach solutions of copper anode slime by tri-butyl phosphate (TBP) |
Nima SADEGHI, Eskandar Keshavarz ALAMDARI |
3258 |
| Reductive kinetics of Panzhihua ilmenite with hydrogen |
Chang-yuan LU, Xing-li ZOU, Xiong-gang LU, Xue-liang XIE, Kai ZHENG, Wei XIAO, Hong-wei CHENG, Guang-shi LI |
3266 |
| Nucleation and early stages of growth of lead onto copper electrodes from dilute electrolytes |
Neboj？a D. NIKOLI？, Sanja I. STEVANOVI？, Goran BRANKOVI？ |
3274 |
| Formation and growth of Cu-Al IMCs and their effect on electrical property of electroplated Cu/Al laminar composites |
Jian ZHANG, Bin-hao WANG, Guo-hong CHEN, Ruo-min WANG, Chun-hui MIAO, Zhi-xiang ZHENG, Wen-ming TANG |
3283 |
| Effect of depressurizing speed on mold filling behavior and entrainment of oxide film in vacuum suction casting of A356 alloy |
Shan-guang LIU, Fu-yang CAO, Jun-ying YI, Xin-yi ZHAO, Jing ZENG, Zhi-liang NING, Jian-fei SUN |
3292 |
| Boron removal from molten silicon using CaO-SiO2-BaO-CaF2 slag |
Jin-ling SUN, Jin-chuan JIE, Qing-chuan ZOU, Li-juan GUO, Zhi-qiang CAO, Tong-min WANG, Ting-ju LI |
3299 |
