Structural Materials |
Stress corrosion cracking behaviour of 7xxx aluminum alloys:A literature review |
A. C. UMAMAHESHWER RAO, V. VASU, M. GOVINDARAJU, K. V. SAI SRINADH |
1447 |
Influence of thermomechanical treatments on localized corrosion susceptibility and propagation mechanism of AA2099 Al-Li alloy |
Yan-long MA, Xiao-rong ZHOU, Xiao-min MENG, Wei-jiu HUANG, Yi LIAO, Xiao-li CHEN, Ya-nan YI, Xin-xin ZHANG, G. E. THOMPSON |
1472 |
Effect of pre-deformation on microstructures and mechanical properties of high purity Al-Cu-Mg alloy |
Hui-zhong LI , Ruo-mei LIU, Xiao-peng LIANG, Min DENG, Hui-juan LIAO, Lan HUANG |
1482 |
Dynamic recrystallization behavior of 7085 aluminum alloy during hot deformation |
Dong-feng LI, Duan-zheng ZHANG, Sheng-dan LIU, Zhao-jun SHAN, Xin-ming ZHANG, Qin WANG, Su-qi HAN |
1491 |
Prediction of influence of process parameters on tensile strength of AA6061/TiC aluminum matrix composites produced using stir casting |
J. JEBEEN MOSES, I. DINAHARAN, S. JOSEPH SEKHAR |
1498 |
Corrosion influence on surface appearance and microstructure of compo cast ZA27/SiCp composites in sodium chloride solution |
Biljana Bobi?, Jelena Bajat, Ilija Bobi?, Bore Jegdi? |
1512 |
Effect of laser shock processing on erosive resistance of 6061-T6 aluminum |
J. IBARRA, E. RODRíGUEZ, O. JIMéNEZ, G. GóMEZ-ROSAS, M. FLORES, J. VERDUZCO, J. CHáVEZ |
1522 |
Correction of buckling distortion by ultrasonic shot peening treatment for 5A06 aluminum alloy welded structure |
Ya-zhang HE, Dong-po WANG, Ying WANG, Hai ZHANG |
1531 |
Reverse deep drawability of 5A06 aluminum alloy plate at elevated temperatures |
Zhi-chao ZHANG, Yong-chao XU, Shi-jian YUAN |
1538 |
Hot bend assisted gas forming of AA5083 sheet for making V-shaped trough containing deep uneven concavities |
Jung-Sung TANG, Shyong LEE |
1546 |
Microstructure and properties of Al/Cu bimetal in liquid-solid compound casting process |
Yuan HU, Yi-qing CHEN, Li LI, Huan-dong HU, Zi-ang ZHU |
1555 |
Microstructural evolution and phase transformation during partial remelting of in-situ Mg2Sip/AM60B composite |
Su-qing ZHANG, Ti-jun CHEN, Fa-liang CHENG, Lei-liang LI |
1564 |
Microstructure, mechanical and bio-corrosion properties of as-extruded Mg-Sn-Ca alloys |
Chao-yong ZHAO, Fu-sheng PAN, Hu-cheng PAN |
1574 |
Characterization of discontinuous yielding phenomenon in isothermal compression of TC8 titanium alloy |
Ke WANG, Miao-quan LI |
1583 |
Hot workability of cast and wrought Ni-42Cu alloy through hot tensile and compression tests |
M. ARJMAND, S. M. ABBASI, A. KARIMI TAHERI, A. MOMENI |
1589 |
Microstructure and phase precipitate behavior of Inconel 740H during aging |
Yan GUO, Tai-jiang LI, Cai-xia WANG, Shu-fang HOU, Bo-han WANG |
1598 |
Microstructural investigation and castability anticipation in modern Ti/Al/Nb-containing nickel-based superalloys |
Homam NAFFAKH-MOOSAVY |
1607 |
Functional Materials |
Combined effect of isothermal annealing and pre-compression on mechanical properties of Cu36Zr48Al8Ag8 bulk metallic glass |
Ji GU, Li-xin ZHANG, Yi-han WANG, Song NI, Sheng-feng GUO, Min SONG |
1620 |
Fabrication, tribological and corrosion behaviors of detonation gun sprayed Fe-based metallic glass coating |
Hong WU, Xiao-dong LAN, Yong LIU, Fei LI, Wei-dong ZHANG, Zi-jin CHEN, Xiong-fei ZAI, Han ZENG |
1629 |
Effect of 10% Si addition on cathodic arc evaporated TiAlSiN coatings |
Li-hui ZHU, Cheng SONG, Wang-yang NI, Yi-xiong LIU |
1638 |
Evaluation of three kinds of MCrAlY coatings produced by electrospark deposition |
Yu-jiang XIE, De WANG, Ming-sheng WANG, Wei YE |
1647 |
Structural and optoelectronic properties of AZO thin films prepared by RF magnetron sputtering at room temperature |
Yi-hua SUN, Hai-lin WANG, Jian CHEN, Liang FANG, Lei WANG |
1655 |
Drop failure modes of Sn-3.0Ag-0.5Cu solder joints in wafer level chip scale package |
Ming-liang HUANG, Ning ZHAO, Shuang LIU, Yi-qian HE |
1663 |
Luminescent properties of Lu2MoO6:Eu3+ red phosphor for solid state lighting |
Li LI, Jun SHEN, Xian-ju ZHOU, Yu PAN, Wen-xuan CHANG, Qi-wei HE, Xian-tao WEI |
1670 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Petrogenesis of skarn in Shizhuyuan W-polymetallic deposit, southern Hunan, China:Constraints from petrology, mineralogy and geochemistry |
Yong-sheng CHENG |
1676 |
Leaching kinetics of zinc silicate in ammonium chloride solution |
Sheng-hai YANG, Hao LI, Yan-wei SUN, Yong-ming CHEN, Chao-bo TANG, Jing HE |
1688 |
Recovery of titanium from undissolved residue (tionite) in titanium oxide industry via NaOH hydrothermal conversion and H2SO4 leaching |
Fan-cheng MENG, Tian-yan XUE, Ya-hui LIU, Guo-zhi ZHANG, Tao QI |
1696 |
Electrodeposition of cobalt in double-membrane three-compartment electrolytic reactor |
Jian ZHOU, San-fan WANG, Xiao-san SONG |
1706 |
Effects of electrolyte recycling on desulfurization from bauxite water slurry electrolysis |
Ai-jing Lü, Yi-qi SHEN, Xu-zhong GONG, Zhi WANG, Yu-hua WANG, Ming-yong WANG |
1714 |
Copper corrosion in hot and dry atmosphere environment in Turpan, China |
De-cheng KONG, Chao-fang DONG, Yue-hua FANG, Kui XIAO, Chun-yun GUO, Gang HE, Xiao-gang LI |
1721 |