Structural Materials |
Effect of Si-addition as a grain refiner on microstructure and properties of Ti-6Al-4V Alloy |
Khaled M. IBRAHIM, Abdel Hamied HUSSEIN, Mohamed ABDELKAWY |
1863 |
Precipitation during homogenization cooling in AlMgSi alloys |
Yucel BIROL |
1875 |
Effect of minor Zr and Sc on microstructures and mechanical properties of Al-Mg-Si-Cu-Cr-V alloys |
Yi MENG, Zhi-hao ZHAO, Jian-zhong CUI |
1882 |
Effect of nano TiN/Ti refiner on as-cast and hot-working microstructure of commercial purity aluminum |
Si-qi CAI, Yu-jie LI, Yuan CHEN, Xin-wei LI, Li-hong XUE |
1890 |
Effect of heat treatment conditions on microstructure and wear behaviour of Al4Cu2Ni2Mg alloy |
Erdem KARAKULAK, Muzaffer ZEREN, Ridvan YAMANO?LU |
1898 |
Microstructural and abrasive wear properties of SiC reinforced aluminum-based composite produced by compocasting |
Ali MAZAHERY, Mohsen Ostad SHABANI |
1905 |
Effect of specific pressure on fabrication of 2D-Cf/Al composite by vacuum and pressure infiltration |
Yu-qin MA, Le-hua QI, Wu-qiang ZHENG, Ji-ming ZHOU, Lu-yan JU |
1915 |
Creep age forming of 2124 aluminum alloy with single/double curvature |
Jin ZHANG, Yun-lai DENG, Si-yu LI, Ze-yu CHEN, Xin-ming ZHANG |
1922 |
Effects of cooling rate on microstructure, mechanical and corrosion properties of Mg-Zn-Ca alloy |
Jing-feng WANG, Song HUANG, Sheng-feng GUO, Yi-yun WEI, Fu-sheng PAN |
1930 |
Effect of Ce addition on microstructure of Mg-9Li alloy |
Heng-mei YIN, Bin JIANG, Xiao-yong HUANG, Ying ZENG, Qing-shan YANG, Ming-xing ZHANG, Fu-sheng PAN |
1936 |
Temperature evolution and fatigue life evaluation of AZ31B magnesium alloy based on infrared thermography |
Zhi-feng YAN, Hong-xia ZHANG, Wen-xian WANG, Kai WANG, Fei-fei PEI |
1942 |
Fatigue behavior of friction stir spot welded AZ31 Mg alloy sheet joints |
Tian-jiao LUO, Bao-liang SHI, Qi-qiang DUAN, Jun-wei FU, Yuan-sheng YANG |
1949 |
Effects of welding parameters and tool geometry on properties of 3003-H18 aluminum alloy to mild steel friction stir weld |
M. DEHGHANI, S. A. A. AKBARI MOUSAVI, A. AMADEH |
1957 |
Effect of intermetallic compounds on heat resistance of hot roll bonded titanium alloy-stainless steel transition joint |
Dong-sheng ZHAO, Jiu-chun YAN, Yu-jun LIU |
1966 |
Causes and control of welding cracks in electron-beam-welded superalloy GH4169 joints |
Guo-qing CHEN,Bing-gang ZHANG, Tian-min Lü, Ji-cai FENG |
1971 |
Sensitivity model for prediction of bead geometry in underwater wet flux cored arc welding |
Yong-hua SHI, Ze-pei ZHENG, Jin HUANG |
1977 |
Functional Materials |
Cutting performance of multilayer diamond coated silicon nitride inserts in machining aluminum-silicon alloy |
Nai-chao CHEN, Fang-hong SUN |
1985 |
Wear and corrosion resistance and electroplating characteristics of electrodeposited Cr-SiC nano-composite coatings |
M. Arab JUNEGHANI, M. FARZAM, H. ZOHDIRAD |
1993 |
Tribological behavior and mechanism of NiCrBSi-Y2O3 composite coatings |
Bin CAI, Ye-fa TAN, Hua TAN, Qi-feng JING, Zhong-wei ZHANG |
2002 |
Preparation and oxidation behaviour of electrodeposited Ni-CeO2 nanocomposite coatings |
Hai-jun ZHANG, Yue-bo ZHOU, Jian-Feng SUN |
2011 |
Equal channel angular extrusion of NiTi shape memory alloy tube |
Shu-yong JIANG, Ya-nan ZHAO, Yan-qiu ZHANG, Ming TANG, Chun-feng LI |
2021 |
Phase transformation and damping behavior of lightweight porous TiNiCu alloys fabricated by powder metallurgy process |
Hong-jie JIANG, Chang-bo KE, Shan-shan CAO, Xiao MA, Xin-ping ZHANG |
2029 |
Glass forming ability and mechanical properties of Nb-containing Cu-Zr-Al based bulk metallic glasses |
M. ABBASI, R. GHOLAMIPOUR, F. SHAHRI |
2037 |
NiFe alloy particles doping effect of Gd-Ba-Cu-O bulks processed by a new cold-seeding technology |
Di-fan ZHOU, Kun XU, Shogo HARA, Bei-zhan LI, Mitsuru IZUMI |
2042 |
Electrochemical hydriding performance of Mg-TM-Mm (TM=transition metals, Mm=mischmetal) alloys for hydrogen storage |
V. KNOTEK, D. VOJTěCH |
2047 |
Effect of germanium on electrochemical performance of chain-like Co-P anode material for Ni/Co rechargeable batteries |
Jia-jia LI, Xiang-yu ZHAO, Wei DU, Meng YANG, Li-qun MA, Yi DING, Xiao-dong SHEN |
2060 |
Effects of chromium doping on performance of LiNi0.5Mn1.5O4 cathode material |
Wei WANG, Heng LIU, Yan WANG, Chao GAO, Jun ZHANG |
2066 |
Mechanical alloying and subsequent heat treatment of Ag-Zn powders |
Danny GUZMáN, Oscar RIVERA, Claudio AGUILAR, Stella ORDO?EZ, Carola MARTíNEZ, Daniel SERAFINI, Paula ROJAS |
2071 |
Folate-conjugated Fe3O4 nanoparticles for in vivo tumor labeling |
Chun-jiao ZHOU, Shao-hua WANG, Yu ZHOU, Peng-fei RONG, Zi-zi CHEN, Jin-yan LIU, Jian-da ZHOU |
2079 |
Manufacture, characterization and application of porous metal-fiber sintered felt used as mass-transfer-controlling medium for direct methanol fuel cells |
Wei YUAN, Yong TANG, Xiao-jun YANG, Bin LIU, Zhen-ping WAN |
2085 |
C/C Composites |
Anti-oxidation properties of ZrB2 modified silicon-based multilayer coating for carbon/carbon composites at high temperatures |
He-jun LI, Xi-yuan YAO, Yu-lei ZHANG, Dong-jia YAO, Shao-long WANG |
2094 |
Formation mechanism and oxidation behavior of MoSi2-SiC protective coating prepared by chemical vapor infiltration/reaction |
Zi-bo HE, He-jun LI, Xiao-hong SHI, Qian-gang FU, Heng WU |
2100 |
Double SiC coating on carbon/carbon composites against oxidation by a two-step method |
Can SUN, He-jun LI, Qian-gang FU, Jia-ping ZHANG, Han PENG |
2107 |
SiC-MoSi2/ZrO2-MoSi2 coating to protect C/C composites against oxidation |
Qian-gang FU, Jia-ping ZHANG, Zheng-zhong ZHANG, He-jun LI, Can SUN |
2113 |
C/SiC/MoSi2-SiC-Si multilayer coating for oxidation protection of carbon/carbon composites |
Yu-lei ZHANG, He-jun LI, Zhi-xiong HU, Ke-zhi LI, Lei-lei ZHANG |
2118 |
Preparation and oxidation resistance of B2O3-coated boron-modified carbon foams |
Bin WANG, He-jun LI, Yu-lei ZHANG, Qian WANG |
2123 |
Preparation and mechanical properties of carbon/carbon composites with high textured pyrolytic carbon matrix |
Wei LI, He-jun LI, Jie WANG, Shou-yang ZHANG, Xi YANG, Jian-feng WEI |
2129 |
Effect of stress level on fatigue behavior of 2D C/C composites |
Xi YANG, He-jun LI, Kua-hai YU, Shou-yang ZHANG |
2135 |
Fracture mechanism of 2D-C/C composites with pure smooth laminar pyrocarbon matrix under flexural loading |
Wei-feng CAO, He-jun LI, Ling-jun GUO, Shou-yang ZHANG, Ke-zhi LI, Hai-liang DENG |
2141 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Surface energies and appearances of commonly exposed surfaces of scheelite crystal |
Zhi-yong GAO, Wei SUN, Yue-hua HU, Xiao-wen LIU |
2147 |
Effects of Acidiphilium cryptum on biosolubilization of rock phosphate in the presence of Acidithiobacillus ferrooxidans |
Chun-qiao XIAO, Ru-an CHI, Yu-juan FANG |
2153 |
Solubility of hemimorphite in ammonium sulfate solution at 25 °C |
Qin-xiang LI, Hui-ping HU, De-wen ZENG, Qi-yuan CHEN |
2160 |
Separation and recovery of Cu and As from copper electrolyte through electrowinning and SO2 reduction |
Ya-jie ZHENG, Ying-lin PENG, Lang KE, Wen-mi CHEN |
2166 |
Effect of MnO4- and silver content on electrochemical behaviour of Pb-Ag alloy anodes during potential decay periods |
Wei ZHANG, Chang-qing TU, Yi-feng CHEN, Houlachi GEORGEOS, Li XIAO |
2174 |
Overlapped peaks resolution for linear sweep polarography using Gaussian-like distribution |
Hong-qiu ZHU, Guo-wei WANG, Chun-hua YANG, Yu CAO, Wei-hua GUI |
2181 |
3D finite element numerical simulation of advanced detection in roadway for DC focus method |
Xiao-kang DENG, Jian-xin LIU, Hai-fei LIU, Xiao-zhong TONG, Zhou LIU |
2187 |
Modeling dam deformation using independent component regression method |
Wu-jiao DAI, Bin LIU, Xiao-li DING, Da-wei HUANG |
2194 |
Optimization model of GNSS/pseudolites structure design for open-pit mine positioning |
Zheng-ying SHAN, Hou-zeng HAN, Kun JIANG |
2201 |