Structural Materials |
“Abnormal transient creep” in fine-grained Al-5356 alloy observed at low strain rates by high-resolution strain measurement |
Jun-jie SHEN, Kenichi IKEDA, Satoshi HATA, Hideharu NAKASHIMA |
1209 |
Structural and corrosion characterization of biodegradable Mg-RE (RE=Gd, Y, Nd) alloys |
J. KUBáSEK, D. VOJTěCH |
1215 |
Corrosion and electrochemical behavior of Mg-Y alloys in 3.5% NaCl solution |
Xin ZHANG, Yong-jun LI, kui ZHANG, Chang-shun WANG, Hong-wei LI, Ming-long MA, Bao-dong ZHANG |
1226 |
Enhanced corrosion resistance of phytic acid coated magnesium by stearic acid treatment |
R. K. GUPTA, K. MENSAH-DARKWA, J. SANKAR, D. KUMAR |
1237 |
Effect of ultrasonic vibration on Fe-containing intermetallic compounds of hypereutectic Al-Si alloys with high Fe content |
Chong LIN, Shu-sen WU, Gu ZHONG, Li WAN, Ping AN |
1245 |
Materials flow and phase transformation in friction stir welding of Al 6013/Mg |
Pooya POURAHMAD, Mehrdad ABBASI |
1253 |
Microstructure and mechanical properties of extruded Al/Al2O3 composites fabricated by stir-casting process |
H. R. EZATPOUR, M. TORABI-PARIZI, S. A. SAJJADI |
1262 |
Optimization of process parameters for in situ casting of Al/TiB2 composites through response surface methodology |
K. NIRANJAN, P. R. LAKSHMINARAYANAN |
1269 |
Influence of addition of Grp/Al2O3p with SiCp on wear properties of aluminum alloy 6061-T6 hybrid composites via friction stir processing |
A. DEVARAJU, A. KUMAR, B. KOTIVEERACHARI |
1275 |
Influence of filling parameters on fatigue properties of A357 alloy produced by counter pressure plaster mold casting |
Qiang LI, Qi-tang HAO, Wan-qi JIE, Maijer DAAN |
1281 |
Surface recrystallization of single crystal nickel-based superalloy |
Bing ZHANG, Xue-gang CAO, De-lin LIU, Xin-ling LIU |
1286 |
Evolution of lamellar structure in Ti-47Al-2Nb-2Cr-0.2W alloy sheet |
Bin Lu, Lan Huang, Yong Liu, Xiao-peng Liang, Bin Liu, Yue-hui HE, Hui-zhong LI |
1293 |
Influence of Zr content on microstructure and mechanical properties of implant Ti-35Nb-4Sn-6Mo-xZr alloys |
Shi-juan DAI, Yu WANG, Feng CHEN, Xin-quan YU, You-fa ZHANG |
1299 |
Thermal properties of pressureless melt infiltrated AlN-Si-Al composites |
Ayse KALEMTAS, Gulsum TOPATES, Ozlem BAHADIR, Pinar KAYA ISCI, Hasan MANDAL |
1304 |
Functional Materials |
Effects of infiltration parameters on mechanical and microstructural properties of tungsten wire reinforced Cu47Ti33Zr11Ni6Sn2Si1 metallic glass matrix composites |
N. KHADEMIAN, R. GHOLAMIPOUR |
1314 |
Improvement of thermally grown oxide layer in thermal barrier coating systems with nano alumina as third layer |
Mohammadreza DAROONPARVAR, Muhamad Azizi Mat YAJID, Noordin Mohd YUSOF, Saeed FARAHANY, Mohammad Sakhawat HUSSAIN, Hamid Reza BAKHSHESHI-RAD, Z. VALEFI, Ahmad ABDOLAHI |
1322 |
Preparation, characterization and electrochemical properties of boron-doped diamond films on Nb substrates |
Zhi-ming YU, Jian WANG, Qiu-ping WEI, Ling-cong MENG, Shi-meng HAO, Fen LONG |
1334 |
Analysis of phase in Cu-15%Cr-0.24%Zr alloy |
Li-ming BI, Ping LIU, Xiao-hong CHEN, Xin-kuan LIU, Wei LI, Feng-cang MA |
1342 |
Hot deformation behavior of novel imitation-gold copper alloy |
An-yin ZHU, Jing-lin CHEN, Zhou LI, Li-yang LUO, Qian LEI, Liang ZHANG, Wan ZHANG |
1349 |
Effects of ball milling time on porous Ti-3Ag alloy and its apatite-inducing abilities |
Le-gan HOU, Li LI, Yu-feng ZHENG |
1356 |
Electrochemical discharging performance of 3D porous magnesium electrode in organic electrolyte |
Gang CHENG, Qiang XU, Xi ZHAO, Fei DING, Jing ZHANG, Xing-jiang LIU, Dian-xue CAO |
1367 |
Preparation and oxidation behavior of a novel CeO2-modified chromizing coating |
Jian-feng SUN, Yue-bo ZHOU, Hai-jun ZHANG |
1375 |
Influence of nano-CeO2 on coating structure and properties of electrodeposited Al/α-PbO2/β-PbO2 |
Zhen CHEN, Qiang YU, Deng-hui LIAO, Zhong-cheng GUO, Jian WU |
1382 |
Fabrication of titanium oxide films at low temperature from aqueous solution |
Wen-ning MU, Yu-chun ZHAI, Shuang-zhi SHI |
1390 |
Influence of pH value and chelating reagent on performance of Li3V2(PO4)3/C cathode material |
Wei XIANG, Yan TANG, Yan-ying WANG, Ben-he ZHONG, Wei-mao FANG, Heng LIU, Xiao-dong GUO |
1395 |
Electrochemical hydrogen storage characteristics of as-cast and annealed La0.8-xNdxMg0.2Ni3.15Co0.2Al0.1Si0.05 (x=0-0.4) alloys |
Yang-huan ZHANG, Zhong-hui HOU, Bao-wei LI, Hui-ping REN, Ying CAI, Dong-liang ZHAO |
1403 |
Silicon/flake graphite/carbon anode materials prepared with different dispersants by spray-drying method for lithium ion batteries |
Jun LAI, Hua-jun GUO, Xiang-qun LI, Zhi-xing WANG, Xin-hai LI, Xiao-ping ZHANG, Si-lin HUANG, Lei GAN |
1413 |
Enhanced thermal and electrical properties of poly (D,L-lactide)/multi-walled carbon nanotubes composites by in-situ polymerization |
Qing-hua LI, Qin-hua ZHOU, Dan DENG, Qiao-zhen YU, Li GU, Ke-da GONG, Ke-hang XU |
1421 |
Computational Materials Science and Numerical Modelling |
Constitutive model for thin sheet metal with one or several grains across thickness in micro-forming |
Qian WANG, Xiang-huai DONG, Hai-ming ZHANG, He-zong LI, Yu SHEN |
1428 |
Identification of material parameters from punch stretch test |
Xiao-qiang LI, De-hua HE |
1435 |
Optimum design of flow distribution in quenching tank for heat treatment of A357 aluminum alloy large complicated thin-wall workpieces by CFD simulation and ANN approach |
Xia-wei YANG, Jing-chuan ZHU,, Dong HE, Zhong-hong LAI, Zhi-sheng NONG, Yong LIU |
1442 |
Defect assessment of welded specimen considering weld induced residual stresses using SINTAP procedure and FEA |
M. JEYAKUMAR, T. CHRISTOPHER |
1452 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Rigorous back analysis of shear strength parameters of landslide slip |
Ke ZHANG, Ping CAO, Rui BAO |
1459 |
Integrated interpretation of dual frequency induced polarization measurement based on wavelet analysis and metal factor methods |
Shi-li HAN, Shu-gen ZHANG, Jian-xin LIU, Hou-ji HU, Wen-shan ZHANG |
1465 |
Relationship between Al(OH)3 solubility and particle size in synthetic Bayer liquors |
Xiao-bin LI, Li YAN, Dong-feng ZHAO, Qiu-sheng ZHOU, Gui-hua LIU, Zhi-hong PENG, Shuai-shuai YANG, Tian-gui QI |
1472 |
Technological mineralogy and environmental activity of zinc leaching residue from zinc hydrometallurgical process |
Mi LI, Bing PENG, Li-yuan CHAI, Ning PENG, Xian-de XIE, Huan YAN |
1480 |
Kinetics analysis of decomposition of vanadium slag by KOH sub-molten salt method |
Hui-bin LIU, Hao DU, Da-wei WANG, Shao-na WANG, Shi-li ZHENG, Yi ZHANG |
1489 |
Mechanism of debismuthizing with calcium and magnesium |
Dian-kun LU, Zhe-nan JIN, Yong-feng CHANG, Shu-chen SUN |
1501 |
Ge and Cu recovery from precipitating vitriol supernatant in zinc plant |
Zhao-an ZHOU, Guang CHU, Hong-xiang GAN, Tian-zu YANG, Lin CHEN |
1506 |
Effect of mechanical activation on dissolution kinetics of neutral leach residue of zinc calcine in sulphuric acid |
Xuan-hai LI, Yan-juan ZHANG, Liu-ping PAN, Yan-song WEI |
1512 |
Preparation of nanostructure silver powders by mechanical decomposing and mechanochemical reduction of silver oxide |
Gholam Reza KHAYATI, Kamal JANGHORBAN |
1520 |