Transactions of Nonferrous Metals Society of China
中国有色金属学报(英文版)
Vol. 10 No. 2 April 2000 |
Correlation of seawater corrosion and processing of Cu-Ni alloy tubes① | ZHU Xiao-long(朱小龙) | 131 |
Microstructures and mechanical properties of2014aluminium alloy
forgings made by a new process① |
ZHANG Xin-ming(张新明), SONG Min(宋 日文),ZHOU Zhuo-ping(周卓平), ZENG Su-min(曾苏民) | 139 |
Influence of B2ordered structure on deformation texture① | MAO Wei-min(毛卫民), ZHU Guo-hui(朱国辉), ZHAO Zi-su(赵子苏), YU Yong-ning(余永宁) | 144 |
HREM study on stacking structure of SiGe/Si infrared detector① | LIU An-sheng(刘安生), LIU Zheng(刘 峥), SHAO Bei-ling(邵贝羚), WANG Jing(王 敬) | 149 |
Computer program for equilibrium calculation and diffusion simulation① | JIANG Chao(蒋 超), JIN Zhan-peng(金展鹏) | 156 |
Effect of minor boron addition on mechanical properties of
wrought TiAl alloy① |
WANG Yu(王 瑜), LIN Dong-liang(林栋梁), Chi C.LAW | 162 |
Fretting wear behavior of nitrogen implanted Zircaloy-4alloy① | TANG Guo-yi(唐国翌), Jeon G. Han, Byung H. Choi, W. Kim | 167 |
Synthesis and characteristics of W-Ni-Fe nano-composite powders
prepared by mechanical alloying① |
QU Xuan-hui(曲选辉), FAN Jing-lian(范景莲), LI Yi-min(李益民), HUANG Bai-yun(黄伯云) | 172 |
Location of fluorine atoms and mechanism of improving
superconducting properties with F-doped in YBaCuO series① |
DENG Hui-qiu(邓辉球), GAO Xiao-hui(高孝恢), WANG Xiao-gang(王小刚), ZHAO Li-hua(赵立华) | 176 |
Microstructural evolution of a forged TiAl based alloy
during heat treatment at subtransus temperature① |
TANG Jian-cheng(唐建成), HUANG Bai-yun(黄伯云),LIU Wen-sheng(刘文胜), HE Yue-hui(贺跃辉) | 183 |
Effects of technological parameters on microstructures and
properties of in situ TiCp/Fe composites① |
YAN You-wei(严有为), WEI Bo-kang(魏伯康),FU Zheng-yi(傅正义), LIN Han-tong(林汉同), YUAN Run-zhang(袁润章) | 187 |
Non-dendritic structural7075aluminum alloy by
liquidus cast and its semi-solid compression behavior① |
LIU Dan(刘 丹), CUI Jian-zhong(崔建忠), XIA Ke-nong(夏克农) | 192 |
Preparation of large size aluminium alloy cylindrical
preforms by multi-layer spray deposition① |
KANG Zhi-tao(康智涛), LI Li-li(李历历), CHEN Zhen-hua(陈振华),YUAN Wu-hua(袁武华), FU Ding-fa(傅定发), ZHOU Duo-san(周多三) | 196 |
Effect of low temperature treatment on tensile yield strength of
SiCw/6061Al alloy composites① |
JIANG Chuan-hai(姜传海), WANG De-zun(王德尊),ZHANG Wen-long(张文龙), YAO Zhong-kai(姚忠凯) | 200 |
Effects of graphite on Zn-Sb alloys as anode
materials for lithium-ion batteries① |
L Chun-ping(吕春萍), ZHAO Xin-bing(赵新兵),CAO Gao-shao(曹高劭), ZHU Tie-jun(朱铁军) | 204 |
Fabrication of high strength conductivity submicron
crystalline Cu-5%Cr alloy by mechanical alloying① |
HU Lian-xi(胡连喜), WANG Xiao-lin(王晓林), WANG Er-de(王尔德) | 209 |
Artificial neural networks in steel-mushy aluminum pressing bonding① | ZHANG Peng(张 鹏), DU Yun-hui(杜云慧), REN Xue-ping(任学平),LIU Han-wu(刘汉武), CUI Jian-zhong(崔建忠), BA Li-min(巴立民) | 213 |
Eigen theory of elastic mechanics for anisotropic solids① | GUO Shao-hua(郭少华) | 217 |
Amorphous structure in a laser clad Ni-Cr-Al coating on Al-Si alloy① | LIANG Gong-ying(梁工英), WONG Tsun-Tat(黄俊达),SU Jun-yi(苏俊义), WOO Chung-Ho(胡仲豪) | 220 |
Corrosion behaviour of aluminium-magnesium alloys in molten sodium① | LI Xi-jiang(李细江), RAO Xiong(饶 雄),ZHANG Di(张 荻), SI Peng-cheng(司鹏程) | 224 |
Influence of grain size on mechanical properties of
isostatically pressed beryllium materials① |
ZHONG Jing-ming(钟景明), WANG Zhan-hong(王战宏),NIE Da-jun(聂大钧), MIN Xue-ren(闵学仁), WANG Xue-ze(王学泽),FU Xiao-xu(付晓旭), WANG Ling-sen(王零森) | 228 |
Electron theory analysis on Ti-6Al-4V and Au-8Pd-10Pt alloys① | L Yu-peng(吕宇鹏),, ZHU Rui-fu(朱瑞富), LEI Ting-quan(雷廷权),LI Shi-tong(李士同), MA Quan-sheng(马泉生), LI Mu-sen(李木森), CHAO Zhi-qiang(朝志强) | 232 |
Effects of RE on microstructure and properties of
AZ91magnesium alloy① |
WANG Qu-dong(王渠东), LU Yi-zhen(吕宜振),ZENG Xiao-qin(曾小勤), DING Wen-jiang(丁文江), ZHU Yan-ping(朱燕萍) | 235 |
Separation of inclusions from liquid metal contained in a
triangle/square pipe by travelling magnetic field① |
ZHONG Yun-bo(钟云波), REN Zhong-ming(任忠鸣),DENG Kang(邓 康), JIANG Guo-chang(蒋国昌), XU Kuang-di(徐匡迪) | 240 |
Electrolytic preparation of Al-Ca master alloy on liquid Al cathode① | YANG Bao-gang(杨宝刚), QIU Zhu-xian(邱竹贤), GAO Bing-liang(高炳亮) | 246 |
Leaching behavior of butanedionedioxime as gold ligand① | LI De-liang(李德良), HUANG Nian-dong(黄念东), WANG Dian-zuo(王淀佐) | 250 |
Galvanic effects on electrochemical behaviors of bare surface of304stainless steel① | SUN Dong-bai(孙冬柏), LI Tao(李 涛), YU Hong-ying(俞宏英), YANG De-jun(杨德钧) | 253 |
Preparation of zirconia-alumina powder by co-precipitation① | LI Xiao-bin(李小斌), ZHOU Qiu-sheng(周秋生), PENG Zhi-hong(彭志宏),LIU Gui-hua(刘桂华), Stuart Blackburn, Clive Ponton | 257 |
Kinetics of absorbing hydrogen of Al melt① | LI Pei-jie(李培杰),, ZENG Da-ben(曾大本), JIA Jun(贾 均), LI Qing-chun(李庆春) | 261 |
Preparation of clarificant for glass from As-Sb dust① | GUO Bing-kun(郭炳昆), LI Xin-hai(李新海), WANG Hai-quan(王海全),CHEN Wen-mi(陈文汩), LIU Li-ying(刘丽英) | 264 |
Treatment of cadmium dust with two-stage leaching process① | WANG De-quan(王德全), JIANG Lan(姜 澜), LIN Mao-shen(林茂森) | 267 |
Controlled source time-domain electromagnetic methods for
seafloor electric conductivity mapping① |
YANG Jian-wen, R.N.Edwards | 270 |
Penetration and impact resistance of PDC cutters inclined at
different attack angles① |
LI Xi-bing(李夕兵),, D.A.Summers, G.Rupert, J.Tyler | 275 |
Data perturbation analysis of a linear model① | JIN Feng-xiang(靳奉祥), Michel Mayoud,LU Xiu-shan(卢秀山), Jean-Pierre Quesnel | 280 |
Chaos dynamic characteristics during mine fires① | ZHONG Mao-hua(钟茂华), CHEN Bao-zhi(陈宝智),FAN Wei-cheng(范维澄), WANG Qing-an(王清安) | 284 |