Structural Materials |
Hot deformation mechanism and microstructure evolution of TC11 titanium alloy in field |
CHEN Hui-qin(陈慧琴),, CAO Chun-xiao(曹春晓), GUO Ling(郭灵), LIN Hai(林海) |
1021 |
Optimizing pulsed current gas tungsten arc welding parameters of AA6061 aluminium alloy using Hooke and Jeeves algorithm |
S. BABU, T. SENTHIL KUMAR, V. BALASUBRAMANIAN |
1028 |
Effect of Yb addition on strength and fracture toughness of Al-Zn-Mg-Cu-Zr aluminum alloy |
ZHANG Zhuo(张茁), CHEN Kang-hua(陈康华), FANG Hua-chan(方华婵),QI Xiong-wei(齐雄伟), LIU Gang(刘刚) |
1037 |
Plastic deformation mechanisms of AZ31 magnesium alloy under high strain rate compression |
YANG Yong-biao(杨勇彪),, WANG Fu-chi(王富耻), TAN Cheng-wen(谭成文),WU Yuan-yuan(吴园园), CAI Hong-nian(才鸿年) |
1043 |
Evolution of precipitates of Al-Cu alloy during equal-channel angular pressing at room temperature |
XU Xiao-chang(许晓嫦), LIU Zhi-yi(刘志义), LI Yun-tao(李云涛),DANG Peng(党朋), ZENG Su-min(曾苏明), |
1047 |
Microstructure evolution of AZ91D induced by high energy shot peening |
HOU Li-feng(侯利锋),, WEI Ying-hui(卫英慧),, LIU Bao-sheng(刘宝胜), XU Bing-she(许并社), |
1053 |
Effect of combinative addition of strontium and rare earth elements on corrosion resistance of AZ91D magnesium alloy |
NIU Jie-xin(钮洁欣), CHEN Qiu-rong(陈秋荣), XU Nai-xin(徐乃欣), WEI Zhong-ling(卫中领) |
1058 |
Influence of laser energy input mode on joint interface characteristics in laser brazing with Cu-base filler metal |
LI Li-qun(李俐群), FENG Xiao-song(封小松), CHEN Yan-bin(陈彦宾) |
1065 |
Tribological characteristics of C/C-SiC braking composites under dry and wet conditions |
LI Zhuan(李专), XIAO Peng(肖鹏), XIONG Xiang(熊翔),, ZHU Su-hua(朱苏华) |
1071 |
Effect of porosity on wear resistance of SiCp/Cu composites prepared by pressureless infiltration |
ZHANG Lin(章林), QU Xuan-hui(曲选辉), DUAN Bo-hua(段柏华),HE Xin-bo(何新波), QIN Ming-li(秦明礼) |
1076 |
Functional Materials |
Characterization of CuInS2 thin films prepared by sulfurization of Cu-In precursor |
YAN You-hua(阎有花), LIU Ying-chun(刘迎春), FANG Ling(方玲), ZHU Jing-sen(朱景森),ZHAO Hai-hua(赵海花), LI De-ren(李德仁), LU Zhi-chao(卢志超), ZHOU Shao-xiong(周少雄) |
1083 |
Synthesis and characteristics of large-scale ZnO rods by wet chemical method |
WEI Su-feng(魏素凤), JIANG Qing(蒋青), LIAN Jian-she(连建设) |
1089 |
Microstructure transformation of carbon nanofibers during graphitization |
ZHANG Yong(张勇), TANG Yuan-hong(唐元洪),, LIN Liang-wu(林良武), ZHANG En-lei(张恩磊) |
1094 |
Rapid electroplating of Cu coatings by mechanical attrition method |
NING Zhao-hui(宁朝晖), HE Ye-dong(何业东) |
1100 |
Effects of 5%Ni addition on thermal stability and crystallization behavior of Mg65Cu25Tb10 bulk metallic glass |
QIN Wei-dong(秦卫东), LI Jin-shan(李金山), KOU Hong-chao(寇宏超),GU Xiao-feng(顾晓峰), XUE Xiang-yi(薛祥义), ZHOU Lian(周廉) |
1107 |
Preparation of Al2−xYxW3O12 powders by citrate sol-gel process |
ZHANG Hai-jun(张海军), ZHANG Qing(张青), JIA Quan-li(贾全利), YE Guo-tian(叶国田) |
1112 |
Synthesis of tetragonal BaTiO3 film on Ti substrate by micro-arc oxidation |
PENG Ji-hua(彭继华), LI Wen-fang(李文芳), HAN Bing(韩冰), HUANG Fang-liang(黄芳亮), DU Jun(杜军) |
1117 |
Effect of Y2O3 on microstructure and oxidation of chromizing coating |
ZHOU Yue-bo(周月波), ZHANG Hai-jun(张海军), WANG Yong-dong(王永东) |
1122 |
Nickel co-deposition with SiC particles at initial stage |
TAN Cheng-yu(谭澄宇), LIU Yu(刘宇), ZHAO Xu-shan(赵旭山), ZHENG Zi-qiao(郑子樵) |
1128 |
Effect of BaO addition on electric conductivity of xCu/10NiO-NiFe2O4 cermets |
HE Han-bing(何汉兵), ZHOU Ke-chao(周科朝), LI Zhi-you(李志友), HUANG Bai-yun(黄伯云) |
1134 |
Microstructure and stopped growth mechanism of Y123 bulk fabricated by directional infiltration and growth |
DONG Hao(董昊), HU Rui(胡锐), LI Jin-shan(李金山), KOU Hong-chao(寇宏超),XUE Xiang-yi(薛祥义), CHANG Hui(常辉), CAO Hai-tao(曹海涛), ZHOU Lian(周廉), |
1139 |
Preparation of doping titania antibacterial powder by ultrasonic spray pyrolysis |
WEI Shun-wen(韦顺文), PENG Bing(彭兵), CHAI Li-yuan(柴立元),LIU Yun-chao(刘云超), LI Zhu-ying(李竹英) |
1145 |
Preparation of poly-L-lactide/bioactive glass composite and evaluation of cytotoxicity in vitro |
ZHOU Zhi-hua(周智华),, RUAN Jian-ming(阮建明), ZOU Jian-peng(邹俭鹏),ZHOU Zhong-cheng(周忠诚), CHEN Liang-long(陈良龙) |
1151 |
Tribological behavior and wear mechanism of resin-matrix contact strip against copper with electrical current |
TU Chuan-jun(涂川俊), CHEN Zhen-hua(陈振华),CHEN Ding(陈鼎), YAN Hong-ge(严红革), HE Feng-yi(何凤亿) |
1157 |
Computational Materials Science |
Quasicontinuum simulation of indentation on FCC metals |
WANG Hua-tao(王华滔), QIN Zhao-dong(秦昭栋), NI Yu-shan(倪玉山), ZHANG Wen(张文) |
1164 |
Simulation of sheet metal extrusion processes with Arbitrary Lagrangian-Eulerian method |
ZHUANG Xin-cun(庄新村), ZHAO Zhen(赵震), XIANG Hua(向华), LI Cong-xin(李从心) |
1172 |
Phenomenon of transformed adiabatic shear band surrounded by deformed adiabatic shear band of ductile metal |
WANG Xue-bin(王学滨) |
1177 |
Surface tension of molten Ni-(Cr, Co, W) alloys and segregation of elements |
XIAO Feng(肖锋), LIU Lan-xiao(刘兰霄), YANG Ren-hui(杨仁辉),ZHAO Hong-kai(赵红凯), FANG Liang(方亮), ZHANG Chi(张弛) |
1184 |
Effect of material parameters on stress wave propagation during fast upsetting |
WANG Zhong-jin(王忠金), CHENG Li-dong(程利冬) |
1189 |
3D FEA simulation of 4A11 piston skirt isothermal forging process |
DONG Wan-peng(董万鹏), CHEN Jun(陈军) |
1196 |
Effect of solidification on solder bump formation in solder jet process: Simulation and experiment |
TIAN De-wen(田德文), WANG Chun-qing(王春青), TIAN Yan-hong(田艳红) |
1201 |
Numerical simulation of tungsten alloy in powder injection molding process |
ZHENG Zhen-xing(郑振兴), XIA Wei(夏伟), ZHOU Zhao-yao(周照耀), ZHU Quan-li(朱权利) |
1209 |
Thermo-mechanical coupled analysis of hot ring rolling process |
SUN Zhi-chao(孙志超), YANG He(杨合), OU Xin-zhe(欧新哲) |
1216 |
Evolutionary artificial neural network approach for predicting properties of Cu-15Ni-8Sn-0.4Si alloy |
FANG Shan-feng(方善锋), WANG Ming-pu(汪明朴), WANG Yan-hui(王艳辉),QI Wei-hong(齐卫宏), LI Zhou(李周) |
1223 |
Forming method of axial micro grooves inside copper heat pipe |
LI Yong(李勇), XIAO Hui(肖慧), LIAN Bin(练彬), TANG Yong(汤勇), ZENG Zhi-xin(曾志新) |
1229 |
Mine Engineering, Metallurgical Engineering and Ch |
Role of ore mineralogy in optimizing conditions for bioleaching low-grade complex sulphide ores |
P. A. OLUBAMBI,, S. NDLOVU, J. H. POTGIETER, J. O. BORODE |
1234 |
Selective adsorption of bacteria on sulfide minerals surface |
JIA Chun-yun(贾春云), WEI De-zhou(魏德洲), LIU Wen-gang(刘文刚),HAN Cong(韩聪), GAO Shu-ling(高淑玲), WANG Yu-juan(王玉娟) |
1247 |
Isolation and characterization of acidophilic bacterium from Gaofeng Mine in China |
YANG Yu(杨宇),, QIAN Lin(钱林), SHI Wu-yang(师舞阳),PENG Hong(彭宏), QIU Guan-zhou(邱冠周), |
1253 |
Optimization of separation processing of copper and iron of dump bioleaching solution by Lix 984N in Dexing Copper Mine |
LIU Qing-ming(刘清明),, YU Run-lan(余润兰),, QIU Guan-zhou(邱冠周),, FANG Zheng(方正),, CHEN Ai-liang(陈爱良), ZHAO Zhong-wei(赵中伟) |
1258 |
Recovery of Co(Ⅱ) and Ni(Ⅱ) from hydrochloric acid solution of alloy scrap |
SHEN Yong-feng(申勇峰),, XUE Wen-ying(薛文颖), NIU Wen-yong(牛文勇) |
1262 |
Leaching and recycling of zinc from liquid waste sediments |
PENG Bing(彭兵), GAO Hui-mei(高慧妹), CHAI Li-yuan(柴立元), SHU Yu-de(舒余德) |
1269 |
Purification mechanism of copper electrolyte by As(Ⅲ) |
XIAO Fa-xin(肖发新),, ZHENG Ya-jie(郑雅杰), WANG Yong(王勇),JIAN Hong-sheng(简洪生), HUANG Xing-guan(黄兴远), MA Yu-tian(马玉天) |
1275 |
Inhibition behavior of some new mixed additives upon copper electrowinning |
YU Run-lan(余润兰),, LIU Qing-ming(刘清明), QIU Guan-zhou(邱冠周),,FANG Zheng(方正) , TAN Jian-xi(谭建锡),, YANG Peng(杨鹏), |
1280 |
Surface charge properties of red mud particles generated from Chinese diaspore bauxite |
ZHANG Kun-yu(张琨瑜), HU Hui-ping(胡慧萍), ZHANG Li-juan(张丽娟), CHEN Qi-yuan(陈启元) |
1285 |
Adsorption behavior of gel-type weak acid resin (110-H) for Pb2+ |
XIONG Chun-hua(熊春华), YAO Cai-ping(姚彩萍) |
1290 |