| Materials Science and Engineering |
| Simultaneous improvement of strength and ductility in selective laser melted low Sc content Al-Mg-Mn-Sc-Zr alloy via aging treatment |
Yong-kang CHEN, Yao-xiang GENG, Xiao WANG, Zhi-fa SHAN, Zhi-jie ZHANG, Hong-bo JU |
1729 |
| Microstructure, phase stability, and mechanical properties of Al-Li-Mg-Ti-M (M=Zn, Zr, V) lightweight high-entropy alloys |
Quan DONG, Meng LI, Yu-fei ZHANG, Jing ZHANG |
1742 |
| Statistical analysis of anomalous tension twin and twin transmission in pure Mg sheet for various grain sizes and strain rates |
Sai-jun HUANG, Ran NI, You-fu WAN, Hao ZHOU, Ying ZENG, Dong-di YIN |
1758 |
| Synchronous enhancement of corrosion resistance and mechanical properties of Mg-Zn-Ca alloys by grain refinement using equal channel angular pressing |
Yi-zhuo WANG, Xiao-ping LUO, Gang-xiao REN, Hong-xia WANG, Li-fei WANG, Wei-li CHENG, Hang LI, Xiao-peng LU, Kwang-seon SHIN |
1772 |
| Dynamic recrystallization behavior and spinning texture formation mechanism of magnesium alloy wheel hub |
Bing-chun JIANG, Hao-wei ZHAI, Qing-hang WANG, Meng LI, Tong ZHANG, Bin JIANG |
1787 |
| Silicide precipitation behavior of Si-containing near-β titanium alloy and its effect on grain refinement |
Peng-kun GUO, Chang-jiang ZHANG, Hong FENG, Fu-yin HAN, Hang LI, Jian-chao HAN, Fan PENG, Peng CAO |
1803 |
| Friction and wear performance of fluorinated Ti48Al2Nb2Cr alloy |
Ji-jian Guo, Zhe-xuan Li, Qing-qing Sun, Lian-kui Wu, Fa-he Cao |
1822 |
| Synthesis and interfacial characterization of Cr/CoNiCrAlTaY bilayer coating on γ-TiAl alloy for oxidation protection |
Zhen ZENG, Yong-sheng WANG, Ya-rong WANG, Bing ZHOU, Ke ZHENG, Wan-yuan GUI, Yan-li WANG, Sheng-wang YU, Jun-pin LIN |
1837 |
| Phase classification of high entropy alloys with composition, common physical, elemental-property descriptors and periodic table representation |
Shuai LI, Jia YANG, Shu LI, Dong-rong LIU, Ming-yu ZHANG |
1855 |
| Effect of gradient nanostructures induced by supersonic fine particle bombardment on microstructure and properties of Ni-W-Co-Ta medium-heavy alloy |
Yi Xiong, Miao-miao Yang, Nan Du, Yong Li, Jin-jin Tang, Kang-hao Shu, Shu-bo Wang, Feng-zhang Ren |
1875 |
| Tailoring microstructure, tensile properties, and creep resistance of additively manufactured Inconel 718 superalloy by post heat treatment |
Sajad GHAEMIFAR, Milad ROOSTAEI, Mohammad REZA ZAMANI, Stefan WURSTER, Hamed MIRZADEH |
1890 |
| Isothermal and cyclic oxidation behaviour of Ni-25Cr-10Al-0.5Y coating deposited by AIP and magnetron sputtering at 1323 K |
Chun-tang YU, Shu-tao CHEN, Xiao-yun LI, Wen-yao SUN, Min FENG, Cheng-yang JIANG, Wan-qi PU, Han-qing XIE, De-quan WU, Sheng-long ZHU, Fu-hui WANG |
1907 |
| Effect of sulfate-reducing bacteria on corrosion of copper and brass |
Shu-hua XU, Qin WANG, Zhuo-wei TAN, Xiao-bao ZHOU, Cong LI, Zhen-sheng WANG, Tang-qing WU |
1919 |
| Corrosion behavior and performance degradation of aluminum-copper cable joints with magnetic pulse crimping in salt spray environment |
Yuan-heng YAO, Shao-luo WANG, Hao JIANG, Jun-jia CUI, Guang-yao LI, Kai-dong LUO, Ling-hua XIA |
1937 |
| Microstructure and mechanical properties of high damping Zn-Al eutectoid alloy reinforced by in-situ formed Al2O3 and Al3Zr particles |
Jian-jun ZHANG, Dong-mei LU, Fu-xing YIN, Hui YU, Pu-guang JI, Yu-fang LI, Qing-zhou WANG |
1956 |
| Crystal growth kinetics of single-crystal Ni-rich layered cathodes for high-energy lithium-ion batteries |
Feng LI, Yu-hang TIAN, Lu-xia GE, Sheng-long FAN,Mao-sheng GONG, Ke FAN, Pei-yu HOU, Xian-qi WEI |
1975 |
| Construction and electrochemical performance of NaCrO2@Cr2O3 cathode material for sodium-ion batteries |
Mu-lan QIN, Chao HU, Guo-zhao FANG, Shu-quan LIANG, Wan-min LIU, Bin SHEN |
1987 |
| Core-shell Bi@ mesoporous carbon nanospheres as high rate and long life anodes for sodium ion batteries |
Wu YANG, Zhe-wei YANG, Chao-hui WANG, Hai-nan BIAN, Yue-de PAN, Gang LI, Kai-ying WANG, Jie-xi WANG |
1996 |
| Suppression of Ag dewetting and sinterability improvement of submicron Ag-coated Cu particles as fillers in sintering paste by surface modification with stearic acid |
Yeongjung KIM, Yong-Sung EOM, Kwang-Seong CHOI, Jong-Hyun LEE |
2008 |
| Mining, Minerals Processing and Metallurgical Engineering |
| Mechanical performance of hard red sandstone in acoustic emission integrated conventional triaxial compression tests |
Kun DU, Ming-hui LIU, Xue-feng LI, Li-chang WANG, Jian ZHOU, Tao YANG, Peng LI |
2021 |
| Oxidative volatilization mechanism and kinetics of stibnite at low temperature |
Jiang LIU, Chao-bo TANG, Qiang ZHU, Jian-guang YANG, Tian-xiang NAN, Xian-pan ZHANG |
2036 |
| Transformation behavior of calcium vanadate and manganese vanadate in CaO-V2O5-MnO2 system during calcification roasting of vanadium slag |
Jing WEN, Tao JIANG, Fei-fei LI, Tang-xia YU, Bo-jian CHEN |
2049 |
| Effect of CaO and P2O5 on non-isothermal crystallization of alkaline vanadium slag |
Can-can YU, Jiang DIAO, Jin-an WANG, Wen-feng TAN, Hong-yi LI, Bing XIE |
2061 |
| Efficient removal of impurity Bi element from scrap brass by compound-separation method |
Fei-ran JIANG, Chuan-rong JIAO, Li-juan WANG, Rui-lin WU, Yan-bin JIANG, Qian LEI, Meng WANG, Zhu XIAO, Zhou LI |
2074 |
| Effect of slow-release phosphate on stabilization and long-term stability of Zn and Cd in soil |
Chu-xuan LI, Shan-xin YUAN, Hai-feng LI, Yong-ping LU, Wei-chun YANG, Wen-shun KE, Lu TANG, Chong-jian TANG, William HARTLEY, Sheng-guo XUE |
2091 |
