Materials Science and Engineering |
Strength and plasticity improvement induced by strong grain refinement after Zr alloying in selective laser-melted AlSiMg1.4 alloy |
Yao-xiang GENG, Chun-feng ZAI, Jiang YU, Hao TANG, Hong-wei Lü, Zhi-jie ZHANG |
2733 |
Damping properties and mechanism of aluminum matrix composites reinforced with glass cenospheres |
Kai SUN, Lin WANG,Hang SU, Jia-yi GENG, Qiang ZHANG, Bo MENG, Zeng-yan WEI, Gao-hui WU |
2743 |
Microstructure, interfacial reaction behavior, and mechanical properties of Ti3AlC2 reinforced Al6061 composites |
Zhi-bin LIU, Jia-bao BAO, Wen-jie HU, Hong YAN |
2756 |
Corrosion behavior of 2A97 Al-Cu-Li alloys in different thermomechanical conditions by quasi-in-situ analysis |
You Lü, Xiang-zhe MENG, Yan-yan LI, Ze-hua DONG, Xin-xin ZHANG |
2772 |
Effect of combination of ultraviolet radiation and biocide on fungal-induced corrosion of high-strength 7075 aluminum alloy |
Zheng-yu JIN, Chao WANG, Hai-xian LIU, Hong-wei LIU |
2787 |
Twinning behaviors of Mg-Sn alloy with basal or prismatic Mg2Sn |
Rui-hao FU, Yang-jie WAN, Xun-fei XIONG, Dong-di YIN, Man-ping LIU, Bin JIANG, Zi-rong ZHOU, Yu-yang GAO, Ying ZENG |
2800 |
Design and characterization of biodegradable Mg-Zn-Ag metallic glasses |
Jian WANG, Chen WANG, Wei-feng RAO, In-ho JUNG |
2814 |
Micro-galvanic corrosion behaviour of Mg-(7,9)Al-1Fe-xNd alloys |
Kai-xuan FENG, Tao LAI, Yang CHEN, Zheng YIN, Zhi-qin WU, Hong YAN, Hong-gun SONG, Chao LUO, Zhi HU |
2828 |
A new rhombohedral phase and its 48 variants in β titanium alloy |
Xin-nan WANG, Ming HAN, Fu-rong ZHANG, Guang-ming ZHAO, Zhi-shou ZHU |
2849 |
Bonding enhancement of cold rolling TA1 P-Ti/AA6061 composite plates via surface oxidation treatment |
Lun FU, Bin YANG, Yun-chang GUO, Chao YU, Hong XIAO |
2864 |
Versatile fluidity test model for cast superalloys and comparison between IN718 and IN939 |
Jun ZHANG, Zi-qi JIE, Miao-nan LIU, Min GUO |
2881 |
Microstructure and ablation behavior of Zr-based ultra-high-temperature gradient composites |
Qing-hua LIU, Tian TIAN, Wei SUN, Hong-bo ZHANG, Xiang XIONG |
2889 |
Influence of thermomechanical treatment on recrystallization and softening resistance of Cu-6.5Fe-0.3Mg alloy |
Zhen-xia LIU, Da-wei YUAN, Xin LUO, Lan-hao WANG, Jin-shui CHEN, Hui-ming CHEN, Xiang-peng XIAO, Bin YANG |
2900 |
Formation mechanism of nanopores in dense films of anodic alumina |
Peng-ze LI, Yu ZHANG, Jia-zheng ZHANG, Lin LIU, Shi-yi WANG, Rui LIU, Ye SONG, Xu-fei ZHU |
2918 |
Fabrication and anti-corrosion performance of superhydrophobic silane film on sintered NdFeB |
Wen-tao JU, Li JIANG, Yan-xia LIANG, Shu-ting XU, Ke WANG, Yu-meng YANG, Ben-feng ZHU, Guo-ying WEI,Zhao ZHANG |
2928 |
Improvement of ionic conductivity of solid polymer electrolyte based on Cu-Al bimetallic metal-organic framework fabricated through molecular grafting |
Liu-bin SONG, Tian-yuan LONG, Min-zhi XIAO, Min LIU, Ting-ting ZHAO, Yin-jie KUANG, Lin JIANG, Zhong-liang XIAO |
2943 |
Effect of sintering temperature and holding time on structure and properties of Li1.5Ga0.5Ti1.5(PO4)3 electrolyte with fast ionic conductivity |
Yin-yi LUO, Hao-zhang LIANG, Ping ZHANG, Lei HAN, Qian ZHANG, Li-dan LIU, Zhi-wei LUO, Tian-xiang NING, An-xian LU |
2959 |
In-situ building of multiscale porous NiFeZn/NiZn-Ni heterojunction for superior overall water splitting |
Ya-xin LI, Hong-xiao YANG, Qiu-ping ZHANG, Tian-zhen JIAN, Wen-qing MA, Cai-xia XU, Qiu-xia ZHOU |
2972 |
Mining, Minerals Processing and Metallurgical Engineering |
Acid mine drainage activation mechanism on lime-depressed pyrite flotation from copper sulfide ore |
Jia-qiao YUAN, Zhan DING, Yun-xiao BI, Jie LI, Shu-ming WEN, Shao-jun BAI |
2987 |
A novel surfactant N-hydroxy-9,10-epoxy group-octadecanamide: Part II. Its synthesis and application in flotation separation of spodumene and albite |
Wei-di ZHANG, Meng-jie TIAN, Wei SUN |
3002 |
Effect of inorganic salt impurities on seeded precipitation of silica hydrate from sodium silicate solution |
Xiao-bin LI, Xiao-bing GAO, Qiu-sheng ZHOU, Yi-lin WANG, Tian-gui QI, Lei-ting SHEN, Gui-hua LIU, Zhi-hong PENG |
3016 |
Interphase migration and enrichment of lead and zinc during copper slag depletion |
Jun HAO, Zhi-he DOU, Xing-yuan WAN, Ting-an ZHANG, Kun WANG |
3029 |
Efficient removal of Al(III) and P507 from high concentration MgCl2 solution based on in-situ reaction strategy |
Qiang WANG, Meng WANG, Zong-yu FENG, Yong-qi ZHANG, Xiao-wei HUANG, Xiang-xin XUE |
3042 |
Rapid detection and risk assessment of soil contamination at lead smelting site based on machine learning |
Sheng-guo XUE, Jing-pei FENG, Wen-shun KE, Mu LI, Kun-yan QIU, Chu-xuan LI, Chuan WU, Lin GUO |
3054 |