中国有色金属学报2011年第21卷第8期-《中国有色金属学报》官方网站|全网首发

您目前所在的位置：首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第21卷第8期 2011年8月

结构材料
镁合金等通道转角挤压过程中的晶粒细化机制	何运斌^{1, 2}，潘清林^{1, 2}，刘晓艳^{1, 2}，李文斌^{1, 2}	1785
Mg15Al镁合金ECAP变形过程中β相的碎化机理及动态析出行为	王红霞^{1, 2}，周康康^{1, 2}，梁伟^{1, 2}，龚家林^{1, 2}，曹晓卿¹，赵兴国^{1, 2}	1794
应变速率对AZ61镁合金动态再结晶行为的影响	杨续跃^{1, 2}，张之岭¹，张雷¹，吴新星¹，王军¹	1801
渗注磷酸盐对AZ31镁合金疲劳裂纹扩展的影响	贺显聪^{1, 2}，王章忠¹，白允强¹，巴志新¹，李晓泉¹，沈鸿烈²	1808
温热弯曲成形过程中AZ31镁合金型材的微观织构演变	肖寒^{1, 2}，宋广胜¹，严操¹，张士宏^{1, 2}，阮立群³，张兴国²	1814
Al₃Zr析出对Al-7.81Zn-1.62Mg-1.81Cu合金组织和织构的影响	鲍子成^{1, 2}，万里²，张云崖²，邓运来²	1820
Mg-Zn-Ca合金的非晶形成能力及力学性能	邱克强，杨君宝，尤俊华，任英磊	1828
热等静压温度对FGH95合金组织和持久性能的影响	谢君¹，田素贵¹，周晓明²，钱本江¹，于莉丽¹，汪武祥²	1834
改进型ECAP路径对Al-Mg₂Si原位复合材料组织与力学性能的影响	边丽萍，梁伟，马建，张文利，薛晋波，王红霞，赵兴国	1841
工艺参数对金属粉末共注射成形芯层熔体形貌的影响	王光耀，何浩，李益民，张健光	1847
局部腐蚀对不同热处理状态7055铝合金拉伸性能的影响	廖文博¹，刘心宇^{1, 2}，刘胜胆²，陈慧²，张新明²	1855
不同温度下超细晶铜的准静态压缩力学行为	谢奎，索涛，李玉龙，赵峰	1862
煅烧温度对高体积分数SiC_p/Al复合材料性能的影响	刘君武，李青鑫，丁锋，黄思德，郑治祥	1869
半固态处理对Zr₆₀Cu_17.5Al_7.5Ni₁₀Ti₅非晶形成能力和力学性能的影响	寇生中^{1, 2}，陈延¹，刘广桥¹，李娜¹，郑宝超¹，黄文军¹，索红莉²	1875
采用热焓平衡旋转磁场装置制备半固态浆料	张小立^{1, 2}，李廷举³，谢水生⁴	1881
Ni₃Al基合金IC6与变形合金GH3030间真空钎焊接头的组织与力学性能	王玉叶¹，李树索¹，于静静¹，韩雅芳^{1, 2}	1887
功能材料
Al₂O₃陶瓷基片电子封装材料研究进展	刘兵，彭超群，王日初，王小锋，李婷婷，王志勇	1893
U-Nb合金的可逆塑性变形及其消除方法	何立峰，黄海，杨建雄，任大鹏，张延志	1904
工艺参数对高速电镀锌层形貌和织构的影响	顾训雷，单玉桥，刘常升	1910
制备工艺对N型Bi₂Te_2.4Se_0.6合金热电性能的影响	尹振忠，朱铁军，沈俊杰，杨胜辉，赵新兵	1916
电解液中甲酰胺浓度对阳极氧化制备TiO₂纳米管阵列形貌和光催化性能的影响	马清¹，刘绍军^{1, 2}，翁履谦¹，董文艺³	1921
含Mo金属陶瓷微波吸收材料的制备与性能	俞雨^{1, 2}，程继贵^{1, 2}，梁槟星¹	1929
非晶态Ni-W-P镀层退火晶化和激光晶化组织结构的演变	刘宏¹，郭荣新²，李莎¹，宗云¹，何冰清¹	1936
Co_0.5Ni_0.5Fe₂O₄纳米纤维的静电纺丝法制备、表征及其磁性能	向军^{1, 2}，褚艳秋¹，周广振¹，郭银涛¹，沈湘黔²	1944
金刚石/碳化硅/铝复合材料的热膨胀性能	薛晨，于家康，谭雯	1953
不同相对湿度下C/C复合材料的摩擦磨损性能	岳葆林，徐惠娟，易茂中	1960
化学气相沉积硬质合金TiN/TiCN/Al₂O₃/TiN 多层涂层的抗氧化性能	陈响明^{1, 2}，易丹青¹，黄道远¹，李秀萍²，刘会群¹，吴春萍¹	1967
金修饰纳米多孔Pd催化剂对甲酸氧化的电催化活性	牛凤娟¹，易清风¹，刘云清²	1974
矿业工程 • 冶金工程 • 化学与化工
基于TEA和EDTA·2Na双络合体系的酸性镀铜工艺及镀层特性	张震，李俊	1980
酸洗去除冶金硅中的典型杂质	李成义^{1, 2}，赵立新^{2, 3}，王志¹，郭占成²，王永刚¹	1988
Al基体表面熔盐化学法镀Pb工艺	蒋良兴，郝科涛，吕晓军，赖延清，洪波，李渊，李劼，刘业翔	1997
不同价态碘对溶胶−凝胶法制备的I-TiO₂光催化剂结构和性能的影响	任建坤，曹金丽，王玉萍，王维安，彭盘英	2003
络合−超滤技术处理含镉废水	邱运仁，郜国英，刘敏	2012
TiO₂可见光催化H₂O₂降解水中的有机污染物	唐建军¹，范小江²，邹原¹，刘淑君²，周康根²	2017

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 21 No. 8 August 2011

Structural Materials
Grain refinement mechanism of magnesium alloy during equal channel angular pressing process	HE Yun-bin, PAN Qing-lin, LIU Xiao-yan, LI Wen-bin	1785
Fragmentation mechanism and dynamic precipitation behavior of β phase in Mg15Al magnesium alloy during ECAP	WANG Hong-xia, ZHOU Kang-kang, LIANG Wei, GONG Jia-lin, CAO Xiao-qing, ZHAO Xing-guo	1794
Influence of strain rate on dynamic recrystallization behavior of AZ61 magnesium alloy	YANG Xu-yue, ZHANG Zhi-ling, ZHANG Lei, WU Xin-xing, WANG Jun	1801
Effects of immersing phosphate on fatigue crack propagation in AZ31 magnesium alloy	HE Xian-cong, WANG Zhang-zhong, BAI Yun-qiang, BA Zhi-xin, LI Xiao-quan, SHEN Hong-lie	1808
Microtexture evolution of AZ31 magnesium alloy profile during warm bending process	XIAO Han, SONG Guang-sheng, YAN Cao, ZHANG Shi-hong, RUAN Li-qun, ZHANG Xing-guo	1814
Effect of Al₃Zr precipitation on microstructures and textures of Al-7.81Zn-1.62Mg-1.81Cu alloy plates	BAO Zi-cheng, WAN Li, ZHANG Yun-ya, DENG Yun-lai	1820
Glass-forming ability and mechanical properties for Mg-Zn-Ca alloys	QIU Ke-qiang, YANG Jun-bao, YOU Jun-hua, REN Ying-lei	1828
Effects of hot isostatic pressing temperature on microstructure and stress rupture properties of FGH95 superalloy	XIE Jun, TIAN Su-gui, ZHOU Xiao-ming, QIAN Ben-jiang, YU Li-li, WANG Wu-xiang	1834
Effect of modified ECAP route on microstructure and mechanical property of Al-Mg₂Si in-situ composite	BIANLi-ping, LIANG Wei, MA Jian, ZHANG Wen-li, XUE Jin-bo, WANG Hong-xia, ZHAO Xing-guo	1841
Effects of processing parameters on core melt morphology of metal powder co-injection molding	WANG Guang-yao, HE Hao, LI Yi-min, ZHANG Jian-guang	1847
Effects of local corrosion on tensile properties of 7055 aluminum alloys after different aging treatments	LIAO Wen-bo, LIU Xin-yu, LIU Sheng-dan, CHEN Hui, ZHANG Xin-ming	1855
Quasi-static compressive behavior of ultrafine-grained copper at different temperatures	XIE Kui, SUO Tao, LI Yu-long, ZHAO Feng	1862
Effect of calcination temperature on properties of high volume fraction SiC_p/Al composites	LIU Jun-wu, LI Qing-xin, DING Feng, HUANG Si-de, ZHENG Zhi-xiang	1869
Effect of semi-solid processing on glass forming ability and mechanical properties of Zr₆₀Cu_17.5Al_7.5Ni₁₀Ti₅bulk amorphous alloys	KOU Sheng-zhong, CHEN Yan, LIU Guang-qiao, LI Na, ZHENG Bao-chao, HUANG Wen-jun, SUO Hong-li	1875
Semisolid slurry produced using enthalpy equilibrium rotating magnetic fields device	ZHANG Xiao-li, LI Ting-ju, XIE Shui-sheng	1881
Microstructure and mechanical properties of vacuum brazing joint between Ni₃Al-based alloy IC6 and wrought superalloys GH3030	WANG Yu-ye, LI Shu-suo, YU Jing-jing, HAN Ya-fang	1887
Functional Materials
Research progress in alumina ceramics substrate material for electronic packaging	LIU Bing, PENG Chao-qun, WANG Ri-chu, WANG Xiao-feng, LI Ting-ting, WANG Zhi-yong	1893
Reversible plastic deformation and elimination method of U-Nb alloy	HE Li-feng, HUANG Hai, YANG Jian-xiong, REN Da-peng, ZHANG Yan-zhi	1904
Effects of technological parameters on morphology and texture of high speed galvanized coatings	GU Xun-lei, SHAN Yu-qiao, LIU Chang-sheng	1910
Effect of preparation methods on thermoelectric properties of N-type Bi₂Te_2.4Se_0.6 bulk alloys	YIN Zhen-zhong, ZHU Tie-jun, SHEN Jun-jie, YANG Sheng-hui, ZHAO Xin-bing	1916
Effect of formamide in electrolyte on morphology and photocatalytic activity of TiO₂ nanotube arrays by anodization	MA Qing, LIU Shao-jun, WENG Lü-qian, DONG Wen-yi	1921
Preparation and performance of Mo-contained microwave-absorbing cermets	YU Yu, CHENG Ji-gui, LIANG Bin-xing	1929
Microstructures evolution of electroless amorphous Ni-W-P coating during laser and annealing crystallization	LIU Hong, GUO Rong-xin, LI Sha, ZONG Yun, HE Bing-qing	1936
Electrospinning fabrication, characterization and magnetic properties of Co_0.5Ni_0.5Fe₂O₄ nanofibers	XIANG Jun, CHU Yan-qiu, ZHOU Guang-zhen, GUO Yin-tao, SHEN Xiang-qian	1944
Thermal expansion behavior of diamond/SiC/Al composite	XUE Chen, YU Jia-kang, TAN Wen	1953
Friction and wear properties of C/C composite materials under different relative humidities	YUE Bao-lin, XU Hui-juan, YI Mao-zhong	1960
Thermal oxidation resistance of TiN/TiCN/Al₂O₃/TiN multilayer coatings on cemented carbide by chemical vapor deposition	CHEN Xiang-ming, YI Dan-qing, HUANG Dao-yuan, LI Xiu-ping, LIU Hui-qun, WU Chun-ping	1967
Electrocatalytic activity of Au modified nanoporous palladium electrode for formic acid oxidation	NIU Feng-juan, YI Qing-feng, LIU Yun-qing	1974
Mine
Acid copper electrodepositing process and coating properties based on system of TEA and EDTA·2Na	ZHANG Zhen, LI Jun	1980
Removal of representative impurities from metallurgical grade silicon by acid leaching	LI Cheng-yi, ZHAO Li-xin, WANG Zhi, GUO Zhan-cheng, WANG Yong-gang	1988
Electroless Pb plating on Al substrate in molten salt	JIANG Liang-xing, HAO Ke-tao, LÜ, Xiao-jun, LAI Yan-qing, HONG Bo, LI Yuan, LI Jie, LIU Ye-xiang	1997
Effect of different valence iodine on structure and activity of I-TiO₂ photocatalysts synthesized by sol-gel method	REN Jian-kun, CAO Jin-li, WANG Yu-ping, WANG Wei-an, PENG Pan-ying	2003
Removal of cadmium from wastewater by complexation-ultrafiltration process	QIU Yun-ren, GAO Guo-ying, LIU Min	2012
Degradation of organic pollutants with H₂O₂ photocatalyzed by TiO₂ under visible irradiation	TANG Jian-jun, FAN Xiao-jiang, ZOU Yuan, LIU Shu-jun, ZHOU Kang-gen	2017

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW