Structural Materials |
Microstructure and mechanical properties of Mg, Ag and Zn multi-microalloyed Al-(3.2-3.8)Cu-(1.0-1.4)Li alloys |
Jin-feng LI, Ping-li LIU, Yong-lai CHEN, Xu-hu ZHANG, Zi-qiao ZHENG |
2103 |
Effect of ball milling on microstructural evolution during partial remelting of 6061 aluminum alloy prepared by cold-pressing of alloy powders |
Yu-shi CHEN, Ti-jun CHEN,Su-qing ZHANG, Pu-bo LI |
2113 |
Influence of twist extrusion process on consolidation of pure aluminum powder in tubes by equal channel angular pressing and torsion |
Xiao-xi WANG, Min HE, Zhen ZHU, Ke-min XUE, Ping LI |
2122 |
Microstructure and mechanical properties of Al-6Zn-2.5Mg-1.8Cu alloy prepared by squeeze casting and solid hot extrusion |
Hong-ze FANG, Run-xia LI, Rui-run CHEN, Bao-yi YU, Ying-dong QU, Shi-wen XUN, Rong-de LI |
2130 |
Microstructure characterization and mechanical properties of gas tungsten arc welded cast A356 alloy |
S. TAKHTI, M. REIHANIAN, A. ASHRAFI |
2137 |
Effects of heat input in friction stir welding on microstructure and mechanical properties of AA3003-H18 plates |
B. ABNAR, M. KAZEMINEZHAD, A. H. KOKABI |
2147 |
In situ analysis of multi-twin morphology and growth using synchrotron polychromatic X-ray microdiffraction |
Li LI |
2156 |
As-cast structure and tensile properties of AZ80 magnesium alloy DC cast with low-voltage pulsed magnetic field |
Tian-jiao LUO, Huan-ming JI, Jie CUI, Fu-ze ZHAO, Xiao-hui FENG, Ying-ju LI, Yuan-sheng YANG |
2165 |
Microstructures, corrosion and mechanical properties of as-cast Mg-Zn-Y-(Gd) alloys |
Fei SHI, Chun-qing WANG, Zhong-ming ZHANG |
2172 |
Effects of processing parameters on microstructure of semi-solid slurry of AZ91D magnesium alloy prepared by gas bubbling |
Yang ZHANG, Guo-hua WU, Wen-cai LIU, Liang ZHANG, Song PANG, Wen-jiang DING |
2181 |
Deformation mechanisms of Mg-3Al-1Zn alloy by polycrystal plasticity modeling |
De-liang YIN, Jin-qiang LIU, Bing WU |
2188 |
Hot deformation behavior of TC11/Ti-22Al-25Nb dual-alloy in isothermal compression |
Chun QIN, Ze-kun YAO, Yong-quan NING, Zhi-feng SHI, Hong-zhen GUO |
2195 |
Microstructural characterization of in situ synthesized TiB in cast Ti-1100-0.10B alloy |
Bin-guo FU, Hong-wei WANG, Chun-ming ZOU, Zun-jie WEI |
2206 |
Effect of Nb addition on microstructure, mechanical properties and castability of β-type Ti-Mo alloys |
Ling-bo ZHANG, Ke-zheng WANG, Li-juan XU, Shu-long XIAO, Yu-yong CHEN |
2214 |
Mechanical properties and microstructural evolution of ultrafine grained zircaloy-4 processed through multiaxial forging at cryogenic temperature |
D. FULORIA, S. GOEL, R. JAYAGANTHAN, D. SRIVASTAVA, G. K. DEY, N. SAIBABA |
2221 |
Functional Materials |
Sintering preparation of porous sound-absorbing materials from steel slag |
Peng SUN, Zhan-cheng GUO |
2230 |
Synthesis and characterization of β-Ag2Se and β-AgCuSe nanoparticles via facile precipitation route |
P. PRATHIBA JEYA HELAN, K. MOHANRAJ, G. SIVAKUMAR |
2241 |
Gas sensing properties of Y-doped ZnO nanosheets synthesized via combustion method |
Yan LI, Min LIU |
2247 |
Synthesis of Ni0.8Co0.1Mn0.1(OH)2 precursor and electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode material for lithium batteries |
Yue HUANG, Zhi-xing WANG, Xin-hai LI, Hua-jun GUO, Jie-xi WANG |
2253 |
Mixed salts for lithium iron phosphate-based batteries operated at wide temperature range |
Zhi-an ZHANG, Xing-xing ZHAO, Bo PENG, Yan-qing LAI, Zhi-yong ZHANG, Jie LI |
2260 |
Effect of Mg doping on electrochemical performance of Li3V2(PO4)3/C cathode material for lithium ion batteries |
Yun-ze LUO, Li-hua HE, Xu-heng LIU |
2266 |
Synthesis and characterization of ZnTiO3 with high photocatalytic activity |
Xin YAN, Cui-lian ZHAO, Yi-long ZHOU, Zhen-jun WU, Jian-min YUAN, Wen-sheng LI |
2272 |
Effect of Fe2O3 on non-isothermal crystallization of CaO-MgO-Al2O3-SiO2 glass |
Qing-chun YU, Chun-pei YAN, Yong DENG, Yue-bin FENG, Da-chun LIU, Bin YANG |
2279 |
Mechanical properties, electrical conductivity and microstructure of CuCrZr alloys treated with thermal stretch process |
Bei ZHANG, Zhi-guo ZHANG, Wei LI |
2285 |
Wear behavior of high strength and high conductivity Cu alloys under dry sliding |
Yuan GAO, Jin-chuan JIE, Peng-chao ZHANG, Jian ZHANG, Tong-min WANG, Ting-ju LI |
2293 |
Preparation of gradient wettability surface by anodization depositing copper hydroxide on copper surface |
Jiang CHENG, Yi-fei SUN, An ZHAO, Zi-heng HUANG, Shou-ping XU |
2301 |
Computational Materials Science and Numerical Modelling |
Prediction of crack location and propagation in stretch flanging process of aluminum alloy AA-5052 sheet using FEM simulation |
Y. DEWANG, M. S. HORA, S. K. PANTHI |
2308 |
Smoothed particle hydrodynamics modeling and simulation of foundry filling process |
Wen-jiong CAO, Zhao-yaoZHOU, Fang-mingJIANG |
2321 |
Finite element modeling and experiment for behavior estimation of AlMn0.5Mg0.5 sheet during electromagnetic forming |
Dorin LUCA |
2331 |
Effect of friction coefficient in deep drawing of AA6111 sheet at elevated temperatures |
Wen-yu MA, Bao-yu WANG, Lei FU, Jing ZHOU, Ming-dong HUANG |
2342 |
Forming mechanism of ultrasonic vibration assisted compression |
Xin-cun ZHUANG, Jia-peng WANG, Huan ZHENG, Zhen ZHAO |
2352 |
Simulation of pre-precipitation in Ni75Al14Mo11 alloy by microscopic phase-field model |
Jing-jing LIANG, Rui-qin LI, Yao-Hong ZHAO |
2361 |
Thermo-mechanical coupled particle model for rock |
Ming XIA |
2367 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Analysis and assessment of nickel and chromium pollution in soils around Baghejar Chromite Mine of Sabzevar Ophiolite Belt, Northeastern Iran |
Eisa SOLGI, Javad PARMAH |
2380 |
Adsorption mechanism of 2-mercaptobenzothiazole on chalcopyrite and sphalerite surfaces: Ab initio and spectroscopy studies |
Fen JIAO, Wen-qing QIN, Rui-zeng LIU, Xing-jie WANG |
2388 |
Bio-desilication of rutile concentrate and analysis of community structure in bio-desilication reactor |
Xiang-yu SONG, Guan-zhou QIU, Hai-dong WANG, Jian-ping XIE, Jing XU, Juan WANG |
2398 |
Iron L-edge and sulfur K-edge XANES spectroscopy analysis of pyrite leached by Acidianus manzaensis |
Hong-chang LIU, Jin-lan XIA, Zhen-yuan NIE, Ya-long MA, Chen-yan MA, Lei ZHENG, Cai-hao HONG, Yi-dong ZHAO |
2407 |
Non-isothermal thermal decomposition kinetics of high iron gibbsite ore based on Popescu method |
Zheng-gen LIU, Zheng WANG, Jue TANG, Hong-tao WANG, Hong-ming LONG |
2415 |
Size dependent flow behaviors of particles in hydrocyclone based on multiphase simulation |
Rui CUI, Guang-hui WANG, Mao-lin LI |
2422 |
Oxide film on bubble surface of aluminum foams produced by gas injection foaming process |
Yu-tong ZHOU, Yan-xiang LI |
2429 |
Directional growth behavior of α(Al) dendrites during concentration-gradient- controlled solidification process in static magnetic field |
Lei<,/fnm>, <,snm>,LI <,/snm>,<,/au>,,<,orf id="">, Bo XU, Wei-ping TONG, Li-zi HE, Chun-yan BAN, Hui ZHANG, Yu-bo ZUO, Qing-feng ZHU, <,au>,<,fnm>,,<,au>,<,fnm>,Jian-zhong<,/fnm>, <,snm>,CUI |
2438 |
Electrochemical migration behavior and mechanism of PCB-ImAg and PCB-HASL under adsorbed thin liquid films |
Kang-kang DING, Xiao-gang LI, Kui XIAO, Chao-fang DONG, Kai ZHANG, Rui-tao ZHAO |
2446 |
Electrodeposition behavior of bright nickel in air and water-stable betaine·HCl-ethylene glycol ionic liquid |
Kai GONG, Yi-xin HUA, Cun-ying XU, Qi-bo ZHANG, Yan LI, Juan-jian RU, Ya-fei JIE |
2458 |
Liquid drying of BeO gelcast green bodies using ethanol as liquid desiccant |
Xiao-feng WANG, Chao-qun PENG, Ri-chu WANG, Yue-hua SUN, Yi-xin CHEN |
2466 |
Kinetics of reactive wetting of graphite by liquid Al and Cu-Si alloys |
Di Zhang, Ding-yi Zhu, Teng ZHANG, Qin-feng WANG |
2473 |