| Structural Materials |
| Isothermal section of Mg-rich corner in Mg-Zn-Al ternary system at 335 °C |
Yu-ping REN, Shi-neng SUN, Li-qing WANG, Yun GUO, Hong-xiao LI, Song LI, Gao-wu QIN |
3405 |
| Influence of cooling rate on solidification behavior of sand-cast Mg-10Gd-3Y-0.4Zr alloy |
Song PANG, Guo-hua WU, Wen-cai LIU, Liang ZHANG, Yang ZHANG, Hans CONRAD, Wen-jiang DING |
3413 |
| Microstructure evolution and tensile mechanical properties of thixoformed AZ61 magnesium alloy prepared by squeeze casting |
Tian CHEN, Zhi-wen XIE, Zhuang-zhu LUO, Qin YANG, Sheng TAN, Yun-jiao WANG, Yi-min LUO |
3421 |
| Corrosion fatigue behavior of epoxy-coated Mg-3Al-1Zn alloy in gear oil |
Xiu-li HE, Ying-hui WEI, Li-feng HOU, Zhi-feng YAN, Chun-li GUO, Peng-ju HAN |
3429 |
| Corrosion inhibition effect of N, N′-bis (2-pyridylmethylidene)-1,2-diiminoethane on AZ91D magnesium alloy in acidic media |
D. SEIFZADEH, A. BEZAATPOUR, R. ASADPOUR JOGHANI |
3441 |
| Influence of aluminum content on machinability of AS series cast magnesium alloys |
Birol AKYüZ |
3452 |
| Effect of ultrasonic degassing on performance of Al-based components |
H. PUGA, J. BARBOSA, N. Q. TUAN, F. SILVA |
3459 |
| Influence of melt pouring temperature and plate inclination on solidification and microstructure of A356 aluminum alloy produced using oblique plate |
N. K. KUND |
3465 |
| Characterization of dynamic microstructure evolution during hot deformation of Al-4.10Cu-1.42Mg-0.57Mn-0.12Zr alloy |
Can LIU, Hui ZHANG, Fu-lin JIANG |
3477 |
| Constitutive equations for high temperature flow stress prediction of 6063 Al alloy considering compensation of strain |
Chun-lei GAN, Kai-hong ZHENG, Wen-jun QI, Meng-jun WANG |
3486 |
| Processing map and hot deformation mechanism of novel nickel-free white copper alloy |
Na LIU, Zhou LI, Ling LI, Bin LIU, Gen-ying XU |
3492 |
| Effect of hot working on microstructure and mechanical properties of TC11/Ti2AlNb dual-alloy joint welded by electron beam welding process |
Chun QIN, Ze-kun YAO, Yu-zhi LI, Yong-quan NING, Hong-zhen GUO |
3500 |
| Functional Materials |
| Effect of pore structures on corrosion resistance of porous Ni3Al intermetallics |
Liang WU,Yue-hui HE, Yao JIANG, Yi ZENG, Yi-feng XIAO, Bo NAN |
3509 |
| Pore structure of unidirectional solidified lotus-type porous silicon |
Qian-qian YANG, Yuan LIU, Yan-xiang LI, Yan ZHANG |
3517 |
| Hydrogen storage kinetics of nanocrystalline and amorphous Cu-Nd-added Mg2Ni-type alloys |
Yang-huan ZHANG, Sheng XU, Ting-ting ZHAI, Tai YANG, Ze-ming YUAN, Dong-liang ZHAO |
3524 |
| Synthesis, characterization and electrochemical performance of AlF3-coated Li1.2(Mn0.54Ni0.16Co0.08)O2 as cathode for Li-ion battery |
Yan LI, Kai-yu LIU, Mei-yu Lü, Lai WEI, Jian-jian ZHONG |
3534 |
| Effects of preparation temperature on electrochemical performance of nitrogen-enriched carbons |
Chun WU, Xian-you WANG, Qing-lan ZHAO, Jiao GAO, Yan-song BAI, Hong-bo SHU |
3541 |
| Effects of additives on performance of zinc electrode |
Jin CHENG, Zheng-fu ZHANG, Yi-qun ZHAO, Wen-long YU, Hong-ying HOU |
3551 |
| AgNi15 composite particles prepared by ultrasonic arc spray atomization method |
Jian-bin XIE, Chun-ming WEN, Guo-yi QIN, Si-yong XU, Jin-xin GUO |
3556 |
| Fabrication of TiN/cBN and TiC/diamond coated particles by titanium deposition process |
Walid M. DAOUSH, Hee S. PARK, Soon H. HONG |
3562 |
| Effect of La2O3/CeO2 particle size on high-temperature oxidation resistance of electrodeposited Ni-La2O3/CeO2 composites |
Jun-sheng MENG, Ze-sheng JI |
3571 |
| Preparation, friction and wear properties of hydrophobic lanthanum borate nanorods in rapeseed oil |
Ke-cheng GU, Bo-shui CHEN, Xue-mei WANG, Jiu WANG, Jian-hua FANG, Jiang WU, Li-chuan HUANG |
3578 |
| Computational Materials Science and Numerical Modelling |
| Alloy gene Gibbs energy partition function and equilibrium holographic network phase diagrams of AuCu3-type sublattice system |
You-qing XIE, Xiao-bo LI, Xin-bi LIU, Yao-zhuang NIE, Hong-jian PENG |
3585 |
| Forming defects in aluminum alloy hot stamping of side-door impact beam |
Jing ZHOU, Bao-yu WANG, Jian-guo LIN, Lei FU, Wen-yu MA |
3611 |
| Extrusion force analysis of aluminum pipe fabricated by CASTEX using expansion combination die |
Fu-rong CAO, Jing-lin WEN, Hua DING, Zhao-dong WANG, Chuan-ping YU, Fei XIA |
3621 |
| Formation mechanism and criterion of linear segregation in ZL205A alloy |
Ye WANG, Shi-ping WU, Xiang XUE, Rui-run CHEN, Jian-bing ZHANG, Wen-feng XIAO |
3632 |
| Comparative analysis of isothermal and non-isothermal solidification of binary alloys using phase-field model |
Rong-zhen XIAO, Guo-sheng AN, Chang-sheng ZHU, Zhi-ping WANG, Shi-yin YANG |
3639 |
| Molecular dynamics simulation of fracture behaviors of á110？ tilt grain boundaries in γ-TiAl |
Wen-juan ZHAO, Dong-sheng XU, Jing-wei ZHAO, Hao WANG |
3645 |
| Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
| Ore-forming material of Dachang tin deposit in Guangxi, China: Lead isotope evidence |
Yong-sheng CHENG, Cheng PENG |
3652 |
| Geostress measurements near fault areas using borehole stress-relief method |
Ming-qing HUANG, Ai-xiang WU, Yi-ming WANG, Bin HAN |
3660 |
| Short-term warning and integrity monitoring algorithm for coal mine shaft safety |
Jian WANG, Xing-long TAN , Hou-zeng HAN, T. B. AFENI |
3666 |
| Multiple Kalman filters model with shaping filter GPS real-time deformation analysis |
Li-hua LI, Jun-huan PENG |
3674 |
| Effects of particle size and particle interactions on scheelite flotation |
Wan-zhong YIN, Ji-zhen WANG |
3682 |
| Copper, zinc, and iron bioleaching from polymetallic sulphide concentrate |
Vesna T. CONI？, Mirjana M. RAJ？I？ VUJASINOVI？, Vlastimir K. TRUJI？, Vladimir B. CVETKOVSKI |
3688 |
| Calculating models on surface tension of RE2O3-MgO-SiO2 (RE=La, Nd, Sm, Gd and Y) melts |
Cheng-chuan WU, Guo-guang CHENG |
3696 |
| Effect of sulfur impurity on coke reactivity and its mechanism |
Jin XIAO, Song-yun DENG, Qi-fan ZHONG, Shao-long YE |
3702 |
| Non-isothermal reduction kinetics of Fe2O3-NiO composites for formation of Fe-Ni alloy using carbon monoxide |
Bo LI, Yong-gang WEI, Hua WANG |
3710 |
| Preparation of electronic grade manganese sulfate from leaching solution of ferromanganese slag |
Sheng YAN, Yun-ren QIU |
3716 |
| Framework-solvent interactional mechanism and effect of NMP/DMF on solvothermal synthesis of [Zn4O(BDC)3]8 |
Zheng-ping WU, Ming-xue WANG, Li-jiao ZHOU, Zhou-lan YIN, Jin TAN, Jin-ling ZHANG, Qi-yuan CHEN |
3722 |
| Capping effect of reducing agents and surfactants in synthesizing silver nanoplates |
Yang YAN, Ke-bin CHEN, Hao-ran LI, Wei HONG, Xiao-bin HU, Zhou XU |
3732 |
| Effect of surfactants on dispersion property and morphology of nano-sized nickel powders |
Guo-yong HUANG, Sheng-mingXU, Lin-yanLI, Xue-junWANG |
3739 |
