Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面

中国有色金属学报

ZHONGGUO YOUSEJINSHU XUEBAO

第23卷    第6期    总第171期    2013年6月

[PDF全文下载]    [Flash在线阅读]

    

文章编号:1004-0609(2013)06-1507-09
挤压态7075铝合金再结晶经验模型及应用
郭海龙,孙志超,杨 合

(西北工业大学材料学院 凝固技术国家重点实验室,西安 710072)

摘 要: 通过等温压缩试验和定量金相分析研究挤压态7075铝合金在变形温度为250~450℃、应变速率0.01~10 s-1下的变形行为和组织演化规律,得到不同变形条件下的真应力—应变曲线、平均晶粒尺寸、再结晶晶粒尺寸及再结晶分数。基于Yada模型通过统计回归建立挤压态7075铝合金动态再结晶经验模型并进行验证。结果表明:所建立的Yada再结晶模型误差平均值达到5%;通过二次开发实现了再结晶模型与Deform-3D软件的结合,并进行单向墩粗模拟验证,结果表明该模型预报精度较好。采用所建立的Yada再结晶模型研究7075铝合金三通件多向加载成形过程组织演化,获得加载路径对工件晶粒尺寸特征的影响规律。

 

关键字: 7075铝合金;再结晶模型;数值模拟

Empirical recrystallization model and its application of as-extruded aluminum alloy 7075
GUO Hai-long, SUN Zhi-chao, YANG He

State Key Laboratory of Solidification Processing, School of Materials Science and Engineering,
Northwestern Polytechnical University, Xi’an 710072, China

Abstract:Using isothermal compression test and quantitative metallographic analysis, the deformation behavior and microstructure evolution of as-extruded aluminum alloy 7075 were studied within a temperature range of 250-450 ℃ and a strain rate range of 0.01-10s-1. The true stress—strain curves, average grain size, recrystallized grain size, recrystallization volume fraction under different deformation conditions were obtained. Based on Yada recrystallization model, an empirical dynamic recrystallization model of the as-extruded aluminum alloy 7075 was established by means of statistical regression method. The results show that the average error of the model is less than 5%. Through secondary development, the established recrystallization model was implanted in the software Derform-3D, simulation validation shows that the prediction accuracy of the model can meet the requirements. Then, adopting the established model, the microstructure evolution in multi-way loading forging process of the as extruded 7075 triple valve workpiece was studied, and the grain size and distribution laws of the workpiece under the two loading paths were obtained.

 

Key words: 7075 aluminum alloy; recrystallization model; numerical simulation

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn