Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面

中国有色金属学报

ZHONGGUO YOUSEJINSHU XUEBAO

第8卷    第4期    总第29期    1998年12月

[PDF全文下载]    [Flash在线阅读]

    

文章编号:(1998)04-734-5
大团山矿床采空区处理方法
乔春生1 田治友2

(1.北方交通大学土木建筑学院, 北京 100044;
2.北京有色冶金设计研究总院, 北京 100038
)

摘 要:    采用岩石力学原理和方法, 通过现场初始地应力实测、室内岩石力学性质试验和矿床开采全过程的三维有限元模拟,系统地分析了大团山矿床开采过程中采空区顶底板和矿柱的稳定性。结果表明, 矿柱宽度小于27.5m 时,矿柱将会发生失稳, 增加矿柱宽度对采空区顶底板稳定性的影响并不明显。 据此进一步提出了一套合理的空区处理方法, 并被设计和生产所采纳。

 

关键字:     采空区     支护    三维有限元    矿柱     加固

SUPPORT METHODS OF MINED CAVERNS FOR DATUANSHAN DEPOSIT
Qiao Chunsheng1  Tian Zhiyou2

1.Northern Jiaotong University, Beijing 100044, P. R. China;

2.Beijing Central Engineering and research Institute for Non-ferrous Metallurgical Industries, Beijing 100038, P. R. China

Abstract:The stability of rock around mined caverns and safety pillar was analyzed with the measurement of in-situ stresses and laboratory tests of mechanical properties of rocks as well as 3D FEM simulation of the whole course of mining based on rock mechanics principle. It was clarified that vertical safety pillar would become unstable when its width is less than 27.5 m and enlarging the width of the pillar can not improve the stability of hanging wall and footwall significantly. A rational support method was proposed based on the simulation results. The conclusions have been adopted by mining design and production of the deposit.

 

Key words:     mined cavern    support    3D-finite element method    pillar    reinforcement

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn