Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面

中国有色金属学报

ZHONGGUO YOUSEJINSHU XUEBAO

第13卷    第6期    总第57期    2003年12月

[PDF全文下载]    [Flash在线阅读]

    

文章编号:1004-0609(2003)06-1368-06
Zr基大块非晶合金的微区变形及力学性能
武晓峰1,2,3, 张海峰2, 李  宏2, 王爱民2, 杨洪才1, 胡壮麒2

(1. 东北大学 材料与冶金学院, 沈阳 110004; 
2. 中国科学院 金属研究所, 沈阳 110016;
3. 辽宁工学院 材料与化学学院, 锦州 121001
)

摘 要: 利用纳米压痕仪、 扫描电镜等研究了Zr基大块非晶合金在纳米压痕条件下的变形及力学性能。 Zr基大块非晶合金在纳米压头作用下以弹性-塑性方式变形, 载荷—位移曲线及压痕周边多重剪切带(堆起或波纹状)的特征证明了塑性变形的存在。 冷却速度、 第二相及退火等因素影响非晶合金的压痕硬度HV和弹性模量E, 冷却速度小的试样或部位(如试样中心)的HV, E值略高; 离第二相(W丝)越近, HV, E值越高; 退火处理提高非晶的HV, E值, 同时退火与第二相还明显改变压痕周边的变形状态及塑性变形量的大小, 退火显著减小塑性变形量, 使压痕周边凹陷, 而第二相使压痕堆起消失。对塑性变形机理进行了初步分析。

 

关键字: Zr基大块非晶合金; 纳米压痕; 变形; 力学性能

Deformation and mechanical properties of Zr-based bulk metallic glasses under nanoindenter
WU Xiao-feng1, 2, 3, ZHANG Hai-feng2, LI Hong2, WANG Ai-ming2
YANG Hong-cai1, HU Zhuang-qi2

1. College of Materials and Metallurgy, 
Northeastern University, Shenyang 110004, China;
2. Shenyang National Laboratory for Materials Science,
Institute of Metal Research, The Chinese Academy of Sciences, Shenyang 110016, China;
3. College of Materials and Chemistry, 
Liaoning Institute of Technology, Jinzhou 121001, China

Abstract:Deformation and mechanical properties of Zr-based bulk metallic glasses (BMGs) under nanoindenter and their affecting factors were studied by means of nanoindentation instrument and scanning electron microscope (SEM). The results indicate that Zr-based BMGs deform in an elastic-plastic mode under a nanoindenter. Load—displacement curve, multiple shear bands and ripple shape around a nanoindenter confirm the existence of a amount of plastic deformation. For pure quenched Zr-based BMGs, the larger the size of samples or the nearer the location away from the surface of a same sample, the smaller the values of microhardness and elastic modulus; annealing and tungsten fiber addition both enhance the values of HV and E, and significantly change the morphology around a nanoindenter and the amount of plastic deformation. The mechanism of plastic deformation is preliminarily analyzed. 

 

Key words: Zr-based bulk metallic glass; nanoindention; deformation; mechanical property

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn