Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面

中国有色金属学报

ZHONGGUO YOUSEJINSHU XUEBAO

第12卷    第6期    总第51期    2002年12月

[PDF全文下载]    [Flash在线阅读]

    

文章编号:1004-0609(2002)06-1149-05
管筒形件的机械扩径成形条件
郭宝锋,聂绍珉,金 淼, 李 群,任运来

(燕山大学 机械工程学院, 秦皇岛 066004)

摘 要: 机械扩径是制造各种管筒形零件的有效方法之一。 研究机械扩径技术,首先需要建立管坯在扩径过程中可以扩圆的整体屈服条件和可能扩裂的局部破坏条件。根据管坯的基本变形规律和主要特征,提出了在机械扩径过程中,管坯变形可以分为整圆和扩径两个阶段的概念。 通过对这两个变形阶段的应力分析,建立了管筒形零件机械扩径时的整体屈服和局部破坏条件,即机械扩径成形条件。

 

关键字: 机械扩径;应力分析;成形条件;管筒形件

Mechanical expanding forming criterion for cylindric products
GUO Bao-feng, NIE Shao-min, JIN Miao,
LI Qun, REN Yun-lai

College of Mechanical Engineering,
Yanshan University, Qinhuangdao 066004, China

Abstract:Expanding is one of the effective methods for producing cylindrical parts. It is a key subject in the basal research on expanding technology to set up a reasonable technical standard and the predetermined deformation level, according to the specific shape of the raw pipes. It is therefore necessary to give the overall yielding criterion for expanding and the local rupture criterion for possible cracking. Based on the basic deformation law and main features of pipe, a conception that the deformation process can be divided into two stages was established. After the stress analysis of the part at the stages, the overall yielding criterion for expanding and the local rupture criterion for possible cracking were established.

 

Key words: mechanical expanding; stress analysis; forming criterion; cylindric products

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn