Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面

中国有色金属学报

ZHONGGUO YOUSEJINSHU XUEBAO

第11卷    第z2期    总第100期    2001年11月

[PDF全文下载]    [Flash在线阅读]    

    

文章编号:  1004-0609(2001)S2-0047-07
热型连铸锌铝合金的缺陷形成与机理
马   颖1, 郝  远1,阎峰云1, 刘洪军2

(1.甘肃工业大学 材料科学与工程学院, 兰州 730050;
2. 华中科技大学 材料科学与工程学院, 武汉 430074
)

摘 要:   对5种典型锌铝合金在热型连铸工艺条件下的连续定向凝固进行了研究,探讨该工艺下锌铝合金线材表面缺陷的产生机理,并对部分缺陷的组织结构进行了显微分析。结果表明:只有金属液压头、型口温度、拉铸速度和冷却条件诸工艺参数在一定范围内的协调配合,才能拉铸出表面光滑的锌铝合金线材。不合理的工艺参数将导致热裂、表面粗糙、糊状型口和拉漏等缺陷。固液两相区的形状和位置对上述缺陷的形成有重要影响,当固液两相区位于型口或型内时,凝固界面将向型内凸入,如果剩余液体不能抵消凝固收缩,就会出现表面粗糙;若凝固界面深入型内较多,则使型内凝固的铸锭摩擦力过大,形成热裂;固液两相区移至型外,凝固界面将变成平面,容易发生拉漏。

 

关键字:   连续铸造; 定向凝固; 加热铸型;锌铝合金; 缺陷

Defect formation and mechanism of ZA alloy
made in continuous casting by heated mold
MA Ying1, HAO Yuan1, YAN Feng-yun1, LIU Hong-jun2

1. School of Materials Science and Engineering, Gansu University of
Technology, Lanzhou 730050, P.R.China;
2. School of Materials Science and Engineering, Huazhong University of
Sci and Tech, Wuhan 430074, P.R.China

Abstract:The continuous directional solidification technique of five kinds of special ZA alloys with eutectic, peritectic and eutectoid transformation under the condition of continuous casting by heated mold was studies. The mechanism of surface defects appearing in ZA alloy line was discussed and the structure of some defects were analyzed by SEM. The results show that  only when the fitting of various technique factors, pressure head, outlet temperature, pulling speed and cooling condition is reasonable under a certain range, can the ZA alloy smooth line be continuously pulled out. Unreasonable technique will result in hot tear, rough surface, mush outlet, leaking and other defects. The shape and location of solidliquid zone have the importance influence on the forming of above defects. When the solidliquid zone is located in the mould outlet or inner mould, the surface of solidification will protrude into the inner mould. If the left liquid can not counteract the solidification contract, the rough surface will appear. If the solidification surface further into the mould, the ingot in mould will have a big friction force when pulling and form hot tear. When the solid-liquid zone is moved out of mould, the solidification surface will turn into a plane, which made it easy to form leaking. The vibration or unstable operation will make the ingot winding during pulling.

 

Key words: continuous casting; directional solidification; heated mold; zinc-aluminum alloy; defects

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f_ysxb@163.com