Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面

中国有色金属学报

ZHONGGUO YOUSEJINSHU XUEBAO

第11卷    第z2期    总第100期    2001年11月

[PDF全文下载]    [Flash在线阅读]    

    

文章编号:1004-0609(2001)S2-0033-04
一种新型的气体雾化制粉方法
陈   刚1, 陈振华1,  严红革1,  袁武华2

(1. 湖南大学 材料科学与工程学院, 长沙 410082;
2. 中南大学 材料科学与工程系,长沙 410083
)

摘 要: 在传统气体雾化的基础上,提出了一种新型的气体雾化制粉方法,即在雾化气流中添加NaCl粉末, 提高气流的冲击动量。通过对6-6-3青铜, Al,Al-Si,Pb,Sn,Zn等多种材料进行的雾化实验结果表明,该方法能够有效减小雾化粉末的粒度,与传统气体雾化相比,平均粒度可减小50%, 此外还可大幅提高细粉收得率, 且不会过多影响粉末的纯度。

 

关键字: 气体雾化;金属粉末制备

Novel gas atomization method for powder preparation
CHEN Gang1, CHEN Zhen-hua1,  YAN Hong-ge1,  YUAN Wu-hua2

1. School of Materials Science and Engineering,
Hunan University,Changsha 410082, P.R.China;
2. Department of Materials Science and Engineering,
Central South University,Changsha 410083, P.R.China

Abstract:Based on traditional gas atomization, a novel gas atomization method for powder preparation was provided. NaCl powder was added in the flowing gas in order to increase the impact momentum of gas stream. According to the experiments on various materials,including 6-6-3 bronze, Al,Al-Si,Pb,Sn,Zn, the results indicate that this novel method is effective in decreasing particle size (compared with traditional gas atomization, the mean particle size is deceased by 50%), increasing the yield of fine powder,while will not deteriorate the purity of the powder.

 

Key words: gas atomization; metal powder preparation

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f_ysxb@163.com