Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

Transactions of Nonferrous Metals Society of China

中国有色金属学报(英文版)

Vol. 26    No. 4    April 2016


Structural Materials
Characteristics evolution of 6009/7050 bimetal slab prepared by direct-chill casting process Guang-yuan YAN, Feng MAO, Fei CHEN, Wei WU, Zhi-qiang CAO, Tong-min WANG, Ting-ju LI 895
Development of functionally graded aluminium composites using centrifugal casting and influence of reinforcements on mechanical and wear properties N. RADHIKA, R. RAGHU 905
Wearing resistance of in-situ Al-based composites with different SiO2/C/Al molar ratios fabricated by reaction hot pressing El Oualid MOKHNACHE, Gui-song WANG, Lin GENG 917
Effects of high temperature pre-straining on natural aging and bake hardening response of Al-Mg-Si alloys Zhi-hong JIA, Li-peng DING, Yao-yao WENG, Zhang WEN, Qing LIU 924
Production of grain-refined AC7A Al-Mg alloy via solidification in ultrasonic field W. KHALIFA, Y. TSUNEKAWA 930
Effect of T7951 secondary aging treatment on crack propagation behavior of 7055 aluminum alloy Song ZHOU, Lei WANG, Li-yang XIE, Li HUI, Liang XU 938
Hot deformation behavior of homogenized Al-3.2Mg-0.4Er aluminum alloy Jian PENG, Yong-jian WANG, Li-ping ZHONG, Long-fei PENG, Fu-sheng PAN 945
Effect of various melt and heat treatment conditions on impact toughness of A356 aluminum alloy M. AMNE ELAHI, S. G. SHABESTARI 956
Strain rate-dependent high temperature compressive deformation characteristics of ultrafine-grained pure aluminum produced by ECAP Ying YAN, Yue QI, Li-jia CHEN, Xiao-wu LI 966
Fracture energy evaluation on 7075-T651 aluminum alloy welds determined by instrumented impact pendulum R. R. AMBRIZ, D. JARAMILLO, C. GARCíA, F. F. CURIEL 974
Effect of pin profile and process parameters on microstructure and mechanical properties of friction stir welded Al-Cu joints M. FELIX XAVIER MUTHU, V. JAYABALAN 984
Microstructure and mechanical properties of pulsed laser welded Al/steel dissimilar joint Jin YANG, Yu-long LI, Hua ZHANG 994
Dynamic recrystallization behavior of burn resistant titanium alloy Ti-25V-15Cr-0.2Si Shi-qiang LU, De-lai OUYANG, Xia CUI, Ke-lu WANG 1003
Effect of electrochemical state on corrosion-wear behaviors of TC4 alloy in artificial seawater Jun CHEN, Qing ZHANG 1011
Preparation of micro-nanostructure on titanium implants and its bioactivity Rui Zhang, Yi Wan , Xing Ai,Teng Wang, Bo Men 1019
Microstructure and mechanical properties of Fe-doped NiAl-28Cr-6Mo eutectic alloys A. GUNGOR, H. DEMIRTAS 1025
Hot deformation behavior of spray forming LSHR alloy using constitutive equation and processing map Yi XU, Jie WANG 1032
Effect of strain rate and deformation temperature on strain hardening and softening behavior of pure copper Shu-hai HUANG, Da-yu SHU, Chuan-kai HU, Shi-feng ZHU 1044
Computational Materials Science and Numerical Modelling
Thermodynamic assessment of Ni-Yb binary system Dai-man ZHU, Chang-rong LI, Cui-ping GUO, Zhen-min DU, Jun-qin LI 1055
Polycrystal modeling of hot extrusion texture of AZ80 magnesium alloy Yi-chuan SHAO, Tao TANG, Da-yong LI, Guo-wei ZHOU, Shao-rui ZHANG, Ying-hong PENG 1063
Quantitative calculation on atomic site occupation during precipitation of Ni3(Al1-xFex) by microscopic phase-field study Hai-hong LIAO, Min-jie LIANG, Pei-kang BAI 1073
Constitutive equations of 1060 pure aluminum based on modified double multiple nonlinear regression model Pan LI, Fu-guo LI, Jun CAO, Xin-kai MA, Jing-hui LI 1079
Modeling constitutive relationship of 6013 aluminum alloy during hot plane strain compression based on Kriging method Gang XIAO, Qin-wen YANG, Luo-xing LI 1096
Identification of constitutive model parameters for nickel aluminum bronze in machining Zhong-tao FU, Wen-yu YANG, Si-qi ZENG, Bu-peng GUO, Shu-bing HU 1105
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
Flotation of low-grade bauxite using organosilicon cationic collector and starch depressant Xin-yang YU, Hao-lin WANG, Qiang-qiang WANG, Bo FENG, Hong ZHONG 1112
Separation of manganese from calcium and magnesium in sulfate solutions via carbonate precipitation Qing-quan LIN, Guo-hua GU, Hui WANG, Chong-qing WANG, You-cai LIU, Ren-feng ZHU, Jian-gang FU 1118
Influence of sodium silicate on manganese electrodeposition in sulfate solution Jian-rong XUE, Hong ZHONG, Shuai WANG, Chang-xin LI, Fang-fang WU 1126
Reaction pathway and kinetics of CdO nanoparticles prepared from CdCO3 precursor using thermal decomposition method Gholam Reza KHAYATI, Seyed Hadi SHAHCHERAGHI, Vahid LOTFI, Esmael DAREZARESHKI 1138
In situ investigation of atmospheric corrosion behavior of PCB-ENIG under adsorbed thin electrolyte layer Pan YI, Kui XIAO, Kang-kang DING, Gang LI, Chao-fang DONG, Xiao-gang LI 1146
High temperature oxidation behavior of Ti(Al,Si)3 diffusion coating on γ-TiAl by cold spray Ji-qiang WANG, Ling-yan KONG, Tie-fan LI, Tian-ying XIONG 1155
Oxidation behavior of RE-modified nickel-based superalloy between 950 °C and 1150 °C in air Long-fei LIU, Shu-sen WU, Yang CHEN, Shu-lin Lü 1163
Bimodal-grained Ti fabricated by high-energy ball milling and spark plasma sintering Yan LONG, Wen-jing GUO, Ying LI 1170
Low frequency damping behavior associated with sintering process in Al powder compact Gang-ling HAO, Xian-yu LI, Wei-guo WANG 1176

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn