Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第25卷    第11期    2015年11月


综述
镍基高温合金相关相图的高通量测定与热力学优化 朱礼龙1,戚海英2,江亮1,金展鹏3 2953
含银硬质涂层高温摩擦学性能的研究进展 何鹏飞,王海斗,马国政,雍青松,陈书赢,徐滨士 2962
结构材料
5052铝合金冲压成形过程中韧性断裂的仿真研究 余海燕,王友 2975
7050-T7451铝合金铣削加工表面材料特性与本构关系模型的建立 于鑫1,孙杰1,熊青春2,韩雄2 2982
氨基酸对7B50铝合金在1 mol/L NaCl+0.1 mol/L HCl溶液中缓蚀性能的影响 杨标标1, 2,孙擎擎1,孙睿吉1, 2,邵首祺2,刘洋2,陈康华1 2990
非等温回归再时效对7055铝合金中厚板的厚向组织及性能均匀性的影响 冯迪1, 2,张新明3,刘胜胆3 3000
铝合金薄板固有变形逆解析方法的研究与开发 梁伟1, 2,邓德安3,MURAKAWA Hidekazu4 3011
预回复对固溶-T652处理超高强铝合金挤压材组织与性能的影响 谈成,许晓静,蒋伟,孙良省,张香丽,范亚洲,赵建吉 3019
电磁场作用下中铝合金熔体流动的混沌特征的仿真与分析 刘政1,张嘉艺2,余昭福2 3026
Al-Cu-Mg-Ag新型耐热铝合金的抗腐蚀性能 齐浩,刘晓艳,梁顺星,张喜亮,崔好选,高飞,陈啟怀 3033
Si含量对挤压铸造Al-5.0Cu-0.6Mn-0.7Fe合金显微组织和力学性能的影响 赵愈亮,孟凡生,张杨,张大童,杨超,张卫文 3040
室温多向锻压AZ31镁合金的静态再结晶行为 蒋莉萍1,王军1,肖振宇1,张笃秀1,杨续跃1, 2 3051
基于修正球形双晶模型的金属Al晶界能分子动力学计算 张明亮1,杨亮1,魏承炀1,李赛毅1, 2, 3,张新明1, 3 3060
钛/铝异种合金电弧熔钎焊接接头的组织与断裂行为 马志鹏1, 2,于心泷1,孟庆武1 3067
不同使用温度下DD6单晶高温合金的组织演变行为 史振学,刘世忠,熊继春,李嘉荣 3077
Si对FeMoCrNi高温耐磨合金的组织和抗氧化性能的影响 李洁翡1, 2,尹付成1, 2,刘永雄1, 2,欧阳雪枚1, 2,李智1, 2,赵满秀1, 2 3084
准静态和动态加载TA2工业纯钛受迫剪切破坏演化 付应乾1, 2,董新龙1,虎宏智1 3092
氢在钛晶体中扩散行为的第一性原理 刘松1, 2,王寅岗1 3100
深孔法技术在铝合金构件应力场测试中的应用 廖凯,刘义鹏,常星宇,赵青 3107
功能材料
压电纤维复合物驱动应变性能的模拟和优化 王晓宇1,从强1,林秀娟2,陈海燕2,王浩威1,周科朝2,张斗2 3113
Sn-Ag-Cu无铅球栅阵列焊点塑性表征 杨淼森1, 2,孙凤莲1,孔祥霞1,周云芳1 3119
活性炭负载纳米Ag@AgCl材料的制备及其光催化性能 刘文胜,成帆,马运柱,余强,王依锴 3126
电沉积镍和轧制镍显微组织和力学性能的对比 夏天东1, 2,张晓宇1, 2,徐仰涛1, 2,丁万武1, 2,赵文军1, 2 3133
低电阻率多壁碳纳米管粉体的制备和表征 姚辉1,蔡炜1,赵永生2,王利民1,何卫1 3141
添加LaB6的CuW70触头材料的电弧侵蚀行为 陈娟,王献辉,成军,杨晓红,邹军涛 3147
超重力强化结晶硅与熔析剂的高温分离 陈杭1, 2,王志1,池汝安3,靖青秀2,孙丽媛1,杜冰1 3155
复合纤维含量对精铸硅溶胶型壳强度及透气性的影响 芦刚,毛蒲,严青松,纪超众,饶文杰 3164
矿业工程 • 冶金工程 • 化学与化工
湘东八团岩体的成因:地球化学、锆石U-Pb年代学以及Hf同位素的制约 郑明泓1, 2,邵拥军1, 2,隗含涛1, 2,熊伊曲1, 2,邹艳红1, 2,谭华杰1, 2 3171
基于最小梯度支撑的2.5D井地电位法正则化聚焦反演 张志勇1,周峰2,李泽林2 3182
深井似膏体充填管道的输送特性 张钦礼,刘奇,赵建文,刘贱刚 3190
频率域线源CSAET二维反演数值计算 曹创华1, 2,童孝忠1, 2,柳建新1, 2 3196
锡阳极泥硫化焙烧分离锑 卢红波1, 2 3202
稀土电解槽流场的数值模拟 刘钊,李宗安,张小伟,庞思明,陈德宏,王志强 3209
电动势法测量Na2PbO2和Na2ZnO2生成自由能 王志猛1,谢宏伟1,张懿2,翟玉春1, 3 3216
中非铜-钴氧化矿两段浸出过程 李淑梅,刘凯华,李辉,丛自范 3223
Ida2--H2O体系中氧化锌矿的循环浸出低品位 窦爱春1,杨天足2,刘云建1,苏明如1 3229
新型功能化吸附剂G-PA-SBA-15对U(VI)的吸附机理 彭国文1, 2, 3,肖方竹2,丁德馨 2,张志军2,胡南2,王晓亮1,周归4,黄红4,杨锦然4 3237

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 25    No. 11    November 2015


Review
High-throughput experimental determination and thermodynamic assessment of phase diagrams of nickel-based superalloys ZHU Li-long, QI Hai-ying, JIANG Liang, JIN Zhan-peng 2953
Research progress of high-temperature tribologicalproperties of silver-containing hard coatings HE Peng-fei, WANG Hai-dou, MA Guo-zheng, YONG Qing-song, CHEN Shu-ying, XU Bin-shi 2962
Structural Materials
Bulging simulation of ductile fracture of 5052 aluminum alloy YU Hai-yan, WANG You 2975
Milling surface properties of 7050-T7451aluminum alloy and establishment of constitutive model YU Xin, SUN Jie, XIONG Qing-chun, HAN Xiong 2982
Effect of inhibition properties of several amino acids oncorrosion property of 7B50 aluminium alloy in1 mol/L NaCl+0.1 mol/L HCl YANG Biao-biao, SUN Qing-qing, SUN Rui-ji, SHAO Shou-qi, LIU Yang, CHEN Kang-hua 2990
Effect of non-isothermal retrogression and re-ageing onthrough-thickness homogeneity of microstructure and properties in7055 aluminum alloy medium thick plate FENG Di, ZHANG Xin-ming, LIU Sheng-dan 3000
Investigation and development of inverse analysis method toestimate inherent deformation of Al-alloy thin-plate joint LIANG Wei, DENG De-an, MURAKAWA Hidekazu 3011
Effect of pre-recovery treatment on microstructure andproperties of ultra high strength aluminum alloyextrusion treated by solid solution–T652 treatment TAN Cheng, XU Xiao-jing, JIANG Wei, SUN Liang-sheng, ZHANG Xiang-li, FAN Ya-zhou, ZHAO Jian-ji 3019
Simulation and analysis on chaotic characteristic offlow in Al alloy melt under electromagnetic field LIU Zheng, ZHANG Jia-yi, YU Zhao-fu 3026
Corrosion resistance of Al-Cu-Mg-Ag new heat-resistant Al alloy QI Hao, LIU Xiao-yan, LIANG Shun-xing, ZHANG Xi-liang, CUI Hao-xuan, GAO Fei, CHEN Qi-huai 3033
Effect of Si content on microstructures and mechanical properties of Al-5.0Cu-0.6Mn-0.7Fe alloy prepared by squeeze casting ZHAO Yu-liang, MENG Fan-sheng, ZHANG Yang, ZHANG Da-tong, YANG Chao, ZHANG Wei-wen 3040
Static recrystallization behavior of multi-directionallyforged AZ31 magnesium alloy at room temperature JIANG Li-ping, WANG Jun, XIAO Zhen-yu, ZHANG Du-xiu, YANG Xu-yue 3051
Molecular dynamics calculation of Al grain boundaryenergy based on modified spherical bicrystal model ZHANG Ming-liang, YANG Liang, WEI Cheng-yang, LI Sai-yi, ZHANG Xin-ming 3060
Microstructure and fracture behavior of arc welding-brazingjoints between titanium and aluminum dissimilar alloys Ma Zhi-peng, YU Xin-long, MENG Qing-wu 3067
Microstructure evolution behavior ofDD6 single crystal superalloy at different using temperatures SHI Zhen-xue, LIU Shi-zhong, XIONG Ji-chun, LI Jia-rong 3077
Effect of Si on microstructures and oxidation resistance ofFeMoCrNi high temperature wear-resistance alloys LI Jie-fei, YIN Fu-cheng, LIU Yong-xiong, OUYANG Xue-mei, LI Zhi, ZHAO Man-xiu 3084
Quasi-static and dynamic failure evolution oftitanium alloy under forced shear loading FU Ying-qian, DONG Xin-long, HU Hong-zhi 3092
First-principles of hydrogen diffusion mechanism in titanium crystals LIU Song, WANG Yin-gang 3100
Application of deep hole drilling technique onstress measurement of aluminum alloy component LIAO Kai, LIU Yi-peng, CHANG Xing-yu, ZHAO Qing 3107
Functional Materials
Modeling and optimization of actuation strain property ofpiezoelectric fiber composites WANG Xiao-yu, CONG Qiang, LIN Xiu-juan, CHEN Hai-yan, WANG Hao-wei, ZHOU Ke-chao, ZHANG Dou 3113
Plastic characterization and performance ofSn-Ag-Cu lead-free BGA solder joint YANG Miao-sen, SUN Feng-lian, KONG Xiang-xia, ZHOU Yun-fang 3119
Synthesis and photocatalytic properties ofnano-Ag@AgCl loaded activated carbon material LIU Wen-sheng, CHENG Fan, MA Yun-zhu, YU Qiang, WANG Yi-kai 3126
Comparison for microstructure and mechanical properties of electrodeposited nickel and rolled nickel XIA Tian-dong, ZHANG Xiao-yu, XU Yang-tao, DING Wan-wu, ZHAO Wen-jun 3133
Preparation and characterization ofmultiwalled carbon nanotube with low resistivity YAO Hui, CAI Wei, ZHAO Yong-sheng, WANG Li-min, HE Wei 3141
Arc erosion behaviors of CuW70 electricalcontact materials adding LaB6 CHEN Juan, WANG Xian-hui, CHENG Jun, YANG Xiao-hong, ZOU Jun-tao 3147
High temperature separation between silicon and liquationagent after solvent refining enhanced by super gravity force CHEN hang, WANG zhi, CHI Ru-an, JING Qing-xiu, SUN Li-yuan, DU Bing 3155
Effect of composite fiber content on strength and breathability ofsilica sol shell for investment casting LU Gang, MAO Pu, YAN Qing-song, JI Chao-zhong, RAO Wen-jie 3164
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
Petrogenesis of Batuan intrusion: Constraints frompetro-geochemistry, zircon U-Pb dating and Hf isotope ZHENG Ming-hong, SHAO Yong-jun, WEI Han-tao, XIONG Yi-qu, ZOU Yan-hong, TAN Hua-jie 3171
2.5D focusing inversion for borehole-surface electrical databased on minimum gradient support function ZHANG Zhi-yong, ZHOU Feng, LI Ze-lin 3182
Pipeline transportation characteristics offilling paste-like slurry pipeline in deep mine ZHANG Qi-li, LIU Qi, ZHAO Jian-wen, LIU Jian-gang 3190
Inversion numerical calculation of 2D CSAET generated byline current source CAO Chuang-hua, TONG Xiao-zhong, LIU Jian-xin 3196
Separation of antimony fromtin anode slime by sulfidation roasting LU Hong-bo 3202
Numerical simulation of flow field in rare earth electrolysis cell LIU Zhao, LI Zong-an, ZHANG Xiao-wei, PANG Si-ming, CHEN De-hong, WANG Zhi-qiang 3209
Formation free energy of Na2PbO2 and Na2ZnO2measured by electromotive force method WANG Zhi-meng, XIE Hong-wei, ZHANG Yi, ZHAI Yu-chun 3216
Two stage leaching process ofcopper-cobalt oxide ore in Central Africa LI Shu-mei, LIU Kai-hua, LI Hui, CONG Zi-fan 3223
Cycle leaching of low grade zinc oxide ores in Ida2--H2O system DOU Ai-chun, YANG Tian-zu, LIU Yun-jian, SU Ming-ru 3229
Adsorption mechanisms of uranium (VI) fromaqueous solution by G-PA-SBA-15 PENG Guo-wen, XIAO Fang-zhu, DING De-xin, ZHANG Zhi-jun, HU Nan, WANG Xiao-liang, ZHOU Gui, HUANG Hong, YANG Jin-ran 3237

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn