Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第25卷    第7期    2015年7月


结构材料
耐烧蚀超高温陶瓷改性C/C复合材料的研究进展 李 军,杨 鑫,刘红卫,黄启忠,苏哲安 1731
激光冲击强化技术的研究进展 乔红超1,高 宇2,赵吉宾1,陆 莹1,赵亦翔3 1744
Ce添加对AP65镁合金显微组织及电化学性能的影响 胡程旺1,王日初1,彭超群1,冯 艳1,王乃光1, 2 1756
5A06铝合金中厚板的拉深变形行为 张志超1,徐永超1, 2,苑世剑1, 2 1764
喷射沉积法制备Al-Zn-Mg-Cu-Zr合金的显微组织与性能 刘 斌1,汪明朴1, 2,雷 前1,段雨露1,刘林贤1,虞红春1 1773
电磁搅拌法制备的半固态2A50合金的显微组织演变 张晨阳,赵升吨,王永飞 1781
内外压复合作用下5A02铝合金管材的硬化行为 崔晓磊1,王小松1, 2,苑世剑1, 2 1790
基于质点逆向追踪的铝合金空心型材横断面温度的不均匀性 侯文荣1,张志豪1,谢建新1,马青梅2,盖洪涛2 1798
富铈混合稀土对Al-80%Si合金凝固行为和组织的影响 刁 龙,坚增运,朱 满,常芳娥,许军锋 1808
6061-T6铝合金高温本构模型及温成形数值模拟 盈 亮1, 3,戴明华2, 胡 平3,闫巧云3 1815
一次时效温度对新型高强耐蚀GH925合金显微组织和力学性能的影响 石照夏1,颜晓峰1,段春华1,周江波2,何云华2,赵明汉1 1822
Mn/Fe摩尔比对A356铸造铝合金富铁相形态的影响 宋东福,王顺成,郑开宏 1832
高体积分数MWCNTs/AZ80复合材料的显微组织 徐卫平1,李蒙江1, 2,柯黎明1,邢 丽1 1839
功能材料
流延成型技术的研究进展 谢雨洲,彭超群,王小锋,王日初,刘家杰,徐 健 1846
基于第一性原理掺杂稀土Ce的Cr13钢组织及其抗CO2腐蚀性能 王 勇1,张正江2,张旭昀1,孙振旭3 1858
CNTs/Cu复合超细粉末及其复合材料的制备 胡柏新1,陈小华1,许龙山2,汪次荣1,林承润2 1867
Nb添加对Zr50.5-xAl9Ni4.05Cu36.45Nbx非晶合金热稳定性及力学性能的影响 张 丹1, 2,邱克强1,任英磊1,李荣德1,胡壮麒3 1876
热型连铸铝线的制备及其显微组织和性能 胡 炜1,王彦红1,赵小军1,肖来荣1, 2,饶 博1,章 玮1 1882
碳源对Sn-Co/C复合材料显微组织和电化学性能的影响 沈 丁,董 伟,李思南,杨绍斌 1890
层状Li0.5Na0.5CoO2的合成及显微结构 周 然1,王 琛1,梁 钰1,石逸扬1,艾延龄1, 2 1897
悬臂梁基板对压电纤维复合物驱动性能的影响 朱 松1,陈子琪1,林秀娟1, 2,周科朝1,张 斗1 1904
锂离子导体包覆镍锰酸锂正极材料的制备及其电化学性能 熊利芝,刘文萍,吴玉先,何则强 1911
超音速火焰喷涂碳化钨-钴涂层磨粒磨损行为 王 群,屈帮荣,唐瞾肸,熊浩奇 1920
基于仪器化Vickers压入比功与马氏硬度识别材料维氏硬度的方法 王家梁,马德军,孙 亮,黄 勇 1929
电磁压制多元金属混合粉末的压型方程 高 歌1,胡建华1,程 呈1,吴 轩1,张 达2 1937
矿业工程 • 冶金工程 • 化学与化工
基于旋转交错网格的探地雷达正演数值模拟 张 彬1, 2, 3,戴前伟1, 2,尹小波1, 3 1943
某铅锌尾矿浓密机溢流的工艺矿物学分析 成 岚1, 2,李茂林1, 2, 3,黄光耀3 1953
堆浸体系含水率的影响因素 尹升华1, 2,陈 勋1, 2 1961
含硼铁精矿还原过程中硼矿物的热力学行为 余建文,韩跃新,高 鹏 1969
碳还原锌浸出渣炼铁过程的热力学分析 刘 洋1,谭 军1,刘常青1,尹周澜1,陈启元1,张平民1,廖 舟2 1978
基于同时平衡原理的Au-I--H2O系热力学分析 李绍英1, 2, 3,赵留成3,孙春宝3,袁喜振3,王培龙3,邓祥意3,刘 柯4 1987
冶金渣颗粒与空气间的换热和阻力特性 米 沙1,谢 锴1,孙 岱2,严 兵1,李 启1 1993
微波焙烧预处理难浸含金硫精矿 陈 伟1, 2,丁德馨1, 2,胡 南2,李 峰1, 2 2000
3-己基-4-氨基-1,2,4-三唑-5-硫酮在黄铜矿表面的吸附动力学与热力学 曲肖彦,刘广义,刘 胜,钟 宏,肖静晶 2006
聚乙二醇对氧化亚铁硫杆菌浸出黄铜矿的影响 张瑞洋,魏德洲,刘文刚,卢 涛,沈岩柏,崔宝玉 2015
全氟物改性煅白的防吸湿机理 梁晓波,李明照,王国卫,梁一然,张耀斌,毛 嘉,任川兮 2022

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 25    No. 7    July 2015


Structural Materials
Research process of ultra high temperature ceramics modified carbon/carbon composites for ablation resistance LI Jun, YANG Xin, LIU Hong-wei, HUANG Qi-zhong, SU Zhe-an 1731
Research process of laser peening technology QIAO Hong-chao, GAO Yu, ZHAO Ji-bin, LU Ying, ZHAO Yi-xiang 1744
Effect of Ce addition on microstructure and electrochemical performance of AP65 magnesium alloy HU Cheng-wang, WANG Ri-chu, PENG Chao-qun, FENG Yan, WANG Nai-guang 1756
Deformation behavior of deep drawing of 5A06 aluminum alloy plate ZHANG Zhi-chao, XU Yong-chao, YUAN Shi-jian 1764
Microstructure and properties of Al-Zn-Mg-Cu-Zr alloy prepared by spray deposition method LIU Bin, WANG Ming-pu, LEI Qian, DUAN Yu-lu, LIU Lin-xian, YU Hong-chun 1773
Microstructural evolution of semisolid 2A50 alloy prepared by electromagnetic stirring ZHANG Chen-yang, ZHAO Sheng-dun, WANG Yong-fei 1781
Hardening behavior of 5A02 aluminum alloy tube under combined action of internal and external pressures CUI Xiao-lei, WANG Xiao-song, YUAN Shi-jian 1790
Temperature inhomogeneity on cross section of Al alloy hollow profile based on reverse point tracking method HOU Wen-rong, ZHANG Zhi-hao, XIE Jian-xin, MA Qing-mei, GAI Hong-tao 1798
Effects of cerium-rich mischmetal on solidification behavior and microstructure of Al-80%Si alloy DIAO Long, JIAN Zeng-yun, ZHU Man, CHANG Fang-e, XU Jun-feng 1808
Thermal constitutive model and numerical simulation of hot forming for 6061-T6 aluminum alloy YING Liang, DAI Ming-hua, HU Ping, YAN Qiao-yun 1815
Effects of primary aging temperature on microstructures and mechanical properties of new corrosion-resistant alloy GH925 with high strength SHI Zhao-xia, YAN Xiao-feng, DUAN Chun-hua, ZHOU Jiang-bo, HE Yun-hua, ZHAO Ming-han 1822
Effects of Mn/Fe mole ratio on iron-rich phase morphology of A356 cast aluminum alloy SONG Dong-fu, WANG Shun-cheng, ZHENG Kai-hong 1832
Microstructure of high volume fraction MWCNTs/AZ80 composites XU Wei-ping, LI Meng-jiang, KE Li-ming, XING Li 1839
Functional Materials
Research progress of tape casting XIE Yu-zhou, PENG Chao-qun, WANG Xiao-feng, WANG Ri-chu, LIU Jia-jie, XU Jian 1846
Microstructure of rare earth Ce doped Cr13 steel based on first-principles calculations and its corrosion resistance for CO2 WANG Yong, ZHANG Zheng-jiang, ZHANG Xu-yun, SUN Zhen-xu 1858
Fabrication of CNTs/Cu ultrafine powders andcomposite materials HU Bai-xin, CHEN Xiao-hua, XU Long-shan, WANG Ci-rong, LIN Chen-run 1867
Effect of Nb addition on thermal stability and mechanical properties of Zr50.5-xAl9Ni4.05Cu36.45Nbx amorphous alloy ZHANG Dan, QIU Ke-qiang, REN Ying-lei, LI Rong-de, HU Zhuang-qi 1876
Preparation of aluminum wire by Ohno continuous casting and its microstructure and properties HU Wei, WANG Yan-hong, ZHAO Xiao-jun, XIAO Lai-rong, RAO Bo, ZHANG Wei 1882
Influence of carbon source on microstructures and electrochemical properties of Sn-Co/C composite SHEN Ding, DONG Wei, LI Si-nan, YANG Shao-bin 1890
Synthesis and microstructure of layered cobaltite Li0.5Na0.5CoO2 ZHOU Ran, WANG Chen, LIANG Yu, SHI Yi-yang, AI Yan-ling 1897
Effect of cantilever substrate on actuation characteristics of piezoelectric fiber composites ZHU Song, CHEN Zi-qi, LIN Xiu-juan, ZHOU Ke-chao, ZHANG Dou 1904
Preparation and electrochemical properties of lithium nickel manganese oxide cathode materials coating with lithium ion conductor XIONG Li-zhi, LIU Wen-ping, WU Yu-xian, HE Ze-qiang 1911
Abrasive wear behavior of WC-Co coating deposited by high velocity oxygen flame process WANG Qun, QU Bang-rong, TANG Zhao-xi, XIONG Hao-qi 1920
Method for determining Vickers hardness of materials by Vickers instrumented indentation work ratio and martens hardness WANG Jia-liang, MA De-jun, SUN Liang, HUANG Yong 1929
Forming equation about multivariate mixed metal powder by electromagnetic compaction GAO Ge, HU Jian-hua, CHENG Cheng, WU Xuan, ZHANG Da 1937
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
GPR simulation based on rotated staggered grid ZHANG Bin, DAI Qian-wei, YIN Xiao-bo 1943
Process mineralogy analysis of certain lead-zinc tailings thickener overflow CHENG Lan, LI Mao-lin, HUANG Guang-yao 1953
Influence factors of moisture content in heap leaching YIN Sheng-hua, CHEN Xun 1961
Thermodynamic behavior of boron minerals in iron concentrate during direct reduction YU Jian-wen, HAN Yue-xin, GAO Peng 1969
Thermodynamic analysis on iron-making process of zinc leaching residue by carbon reduction LIU Yang, TAN Jun, LIU Chang-qing, YIN Zhou-lan, CHEN Qi-yuan, ZHANG Ping-min, LIAO Zhou 1978
Thermodynamic analysis for Au-I--H2O system based on principle of simultaneous equilibrium LI Shao-ying, ZHAO Liu-cheng, SUN Chun-bao, YUAN Xi-zhen, WANG Pei-long, DENG Xiang-yi, LIU Ke 1987
Heat transfer and resistance characteristics between metallurgical slag particles and air MI Sha, XIE Kai, SUN Dai, YAN Bing, LI Qi 1993
Pretreatment of refractory gold-bearing sulfur concentrates by microwave roasting CHEN Wei, DING De-xin, HU Nan, LI Feng 2000
Adsorption kinetics and thermodynamics of 3-hexyl-4-amino-1,2,4-triazole-5-thione on surface of chalcopyrite QU Xiao-yan, LIU Guang-yi, LIU Sheng, ZHONG Hong, XIAO Jing-jing 2006
Effect of polyethylene glycol on chalcopyrite bioleaching with Acidithiobacillus ferrooxidans ZHANG Rui-yang, WEI De-zhou, LIU Wen-gang, LU Tao, SHEN Yan-bai, CUI Bao-yu 2015
Anti-moisture mechanism of calcined dolomite modified by perfluoroalkylethyl acrylate LIANG Xiao-bo, LI Ming-zhao, WANG Guo-wei, LIANG Yi-ran, ZHANG Yao-bin, MAO Jia, REN Chuan-xi 2022

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn