Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第24卷    第8期    2014年8月


结构材料
AZ31镁合金板材冲压成形制耳的晶体塑性模拟 唐伟琴,李大永,彭颖红 1933
镁合金拉伸压缩不对称性的影响因素及控制方法 宋 波1, 2,辛仁龙1,孙立云1,陈 刚1,刘 庆1 1941
轧制参数对AZ31镁合金织构和室温成形性能的影响 杨海波,胡水平 1953
复合能场铸轧对AZ61镁板组织及性能的影响 张欢欢1,黄元春1, 2, 4,刘胜胆1,刘 宇3,肖政兵2, 3,杜志勇4 1960
基于SHPB实验的挤压AZ91D镁合金动态 力学行为数值模拟 周 霞1,赵昌美1,李 利1,黄宏军2 1968
Mg-2Al合金的高温拉伸性能和变形机制 乔 军,边福勃,何 敏 1976
AZ31镁合金挤压板坯的二次变形行为 张义伟1,魏 峰2,刘育锋3,丁汉林1,李殿凯1,杨 磊1 1984
热暴露对7A12-T7352锻件组织和性能的影响 臧金鑫,汝继刚,伊琳娜,李惠曲,王 亮,刘 铭,吴秀亮 1992
热变形参数对Ti2AlNb基合金片层组织演变的影响 李君珺,曾卫东,薛 晨 1998
轻量化构件弯曲短流程工艺研究现状与进展 刘志文1, 2,李落星1, 2 2003
不同Al含量Mo(Si1-x,Alx)2材料的高温氧化行为 颜建辉1, 2,徐健建2,刘龙飞1, 2,毛征宇2,王跃明1, 2,许 宁3 2013
Al和RE对Zn-Al合金镀层组织和耐蚀性的影响 贺志荣,何 应,刘继拓,解 凯 2020
新型Al-Ti-B-Sr复合中间合金线材的制备及其应用 廖成伟1,陈 欢2,罗成志1,陈建春2,潘春旭1 2026
喷射沉积SiCp/Al-Fe-V-Si板坯楔形压制后轧制的 显微组织与断裂行为 贺毅强1, 2,胡建斌3,张 奕3,陈志钢4,冯立超1, 2,陈振华5 2035
Ti对Nb基合金高温抗氧化性能的影响 姜惠仁1,牛莉叶1,席文君1,马文帅2,张 亮3 2044
包套设计对典型粉末钛合金拉伸性能的影响 郭瑞鹏1, 2,徐 磊1,柏春光1,吴 杰1,王清江1,杨 锐1 2050
等通道转角挤压过程中纯铜位错密度变化和力学性能 丁雨田,刘 博,郭廷彪,胡 勇,李海龙,赵珺媛 2057
TLM合金在含蛋白质模拟体液中的腐蚀行为 黄伟九,刘成龙,余永梅,谢 霖 2065
晶界位错发射与湮没过程的晶体相场模拟 高英俊1, 2,卢成健1, 3,罗志荣1, 3,林 葵1, 2,黄创高1, 2 2073
功能材料
热处理型中强度铝合金导体材料的组织与性能 刘东雨1, 2,李文杰1,高 倩1,侯世香1, 2,韩 钰1, 3,祝志祥3 2083
PVP辅助混合溶剂热法制备 高可见光催化活性的花状Bi2WO6催化剂 陈 渊1, 2, 3,杨家添1,韦庆敏1,周科朝3,刘国聪4 2090
Ti-7.5Nb-4Mo-2Sn合金碳硅元素激光 表面合金化涂层的显微组织及耐磨性能 兰志俊,张德闯,杨 飞,罗致春,林建国 2100
Sr2Al14O25:Eu2+,Dy3+的共沉淀-水热合成及其发光性能 杜红丽1,王丽影1,许佳斌1,陈研文2,武利民1,郭栋才2 2107
矿业工程 • 冶金工程 • 化学与化工
虎头崖多金属矿床成矿物质来源及演化 雷源保1, 2,赖健清1,王雄军1,苏生顺3,王守良3,陶诗龙1 2117
硫酸钠和碳酸钠对高铝铁矿中铝铁分离作用的差异 刘牡丹1, 2,姜 涛2,李光辉2,刘 勇1, 刘珍珍1 2129
包头稀土精矿的配合浸出及动力学 张晓伟1, 2,李 梅1, 2,柳召刚1,胡艳宏1, 2,王觅堂1,刘 佳1,阳建平1 2137
离子交换吸附富集红土镍矿浸出液中的镍 杨成武1, 2,廖亚龙1,彭志强1 2145
基于田口法的铜阳极泥微波浸出工艺 马致远,杨洪英,陈国宝,吕 阳,佟琳琳 2152
燕麦秸秆还原浸出低品位软锰矿及其动力学 满瑞林,常 伟,吴 奇,薛建荣 2158
硫脲-硫氰酸钠浸出难处理金矿及浸出剂的稳定性 杨喜云,刘政坤,郭孔彬,徐 徽,石西昌 2164
活性炭强化钒渣中钒、铬提取技术 潘自维1, 2,王大卫1, 2,杜 浩1,陈 刚1,郑诗礼1,王少娜1,张 懿1 2171
微波加热与常规加热时高碳铬铁粉固相脱碳动力学对比研究 李晓光1,陈 津1,郝赳赳1,韩培德1,刘金营2 2181
基于ANSYS的履带式永磁磁选机磁场模拟 卢东方,王毓华,何平波,孙 伟,胡岳华 2188

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 24    No. 8    August 2014


Structural Materials
Crystal plasticity simulation on earing during deep drawing of AZ31 magnesium alloy TANG Wei-qin, LI Da-yong, PENG Ying-hong 1933
Influencing factors and controlling methods of tension-compression asymmetry in magnesium alloys SONG Bo, XIN Ren-long, SUN Li-yun, CHEN Gang, LIU Qing 1941
Influence of rolling parameters on texture and formability of rolled AZ31 magnesium alloys at room temperature YANG Hai-bo, HU Shui-ping 1953
Effect of compound energy field cast-rolling on microstructure and properties of AZ61 magnesium alloy plate ZHANG Huan-huan, HUANG Yuan-chun, LIU Sheng-dan, LIU Yu, XIAO Zheng-bing, DU Zhi-yong 1960
Numerical simulation of dynamic behavior of extruded AZ91D magnesium alloy based on SHPB experiment ZHOU Xia, ZHAO Chang-mei, LI Li, HUANG Hong-jun 1968
High temperature tensile property and deformation mechanism of Mg-2Al alloy QIAO Jun, BIAN Fu-bo, HE Min 1976
Secondary deformation behavior of AZ31 magnesium extruded sheet ZHANG Yi-wei, WEI Feng, LIU Yu-feng, DING Han-lin, LI Dian-kai, YANG Lei 1984
Effect of thermal exposure on microstructure and mechanical properties of 7A12-T7352 forging ZANG Jin-xin, RU Ji-gang, YI Lin-na, LI Hui-qu, WANG Liang, LIU Ming, WU Xiu-liang 1992
Effects of hot deformation parameters on lamellar microstructure evolution of Ti2AlNb based alloy LI Jun-jun, ZENG Wei-dong, XUE Chen 1998
Review of bending short process for lightweight component LIU Zhi-wen, LI Luo-xing 2003
High temperature oxidation behaviors of Mo(Si1-x,Alx)2 with different Al contents YAN Jian-hui, XU Jian-jian, LIU Long-fei, MAO Zheng-yu, WANG Yue-ming, XU Ning 2013
Effects of Al and RE on microstructure and corrosion resistance of Zn-Al alloy coatings HE Zhi-rong, HE Ying, LIU Ji-tuo, XIE Kai 2020
Preparation and application of novel Al-Ti-B-Sr composite master alloy wire LIAO Cheng-wei, CHEN Huan, LUO Cheng-zhi, CHEN Jian-chun, PAN Chun-xu 2026
Microstructure and fracture behaviour of spray-deposited SiCp/Al-Fe-V-Si sheet as-rolled after wedge pressing HE Yi-qiang, HU Jan-bin, ZHANG Yi, CHEN Zhi-gang, FENG Li-chao, CHEN Zhen-hua 2035
Influence of Ti addition on high temperature oxidation resistance of Nb-based alloys JIANG Hui-ren, NIU Li-ye, XI Wen-jun, MA Wen-shuai, ZHANG Liang 2044
Effects of can design on tensile properties of typical powder metallurgy titanium alloys GUO Rui-peng, XU Lei, BAI Chun-guang, WU Jie, WANG Qing-jiang, YANG Rui 2050
Dislocation density variation and mechanical properties of pure copper via equal channel angular pressing DING Yu-tian, LIU Bo, GUO Ting-biao, HU Yong, LI Hai-long, ZHAO Jun-yuan 2057
Corrosion behavior of TLM alloy in simulated body fluid containing proteins HUANG Wei-jiu, LIU Cheng-long, YU Yong-mei, XIE Lin 2065
Phase field crystal simulation of dislocation emission and annihilation at grain boundary GAO Ying-jun, LU Cheng-jian, LUO Zhi-rong, LIN Kui, HUANG Chuang-gao 2073
Functional Materials
Microstructure and properties of heat treatable medium strength aluminium alloy conductor material LIU Dong-yu, LI Wen-jie, GAO Qian, HOU Shi-xiang, HAN Yu, ZHU Zhi-xiang 2083
PVP-assisted complex solvothermal synthesis of flower-like Bi2WO6 catalysts with high visible-light photocatalytic activity CHEN Yuan, YANG Jia-tian, WEI Qing-min, ZHOU Ke-qiao, LIU Guo-cong 2090
Microstructures and wear properties of coating on Ti-7.5Nb-4Mo-2Sn alloy prepared by laser surface alloying of C-Si powders LAN Zhi-jun, ZHANG De-chuang, YANG Fei, LUO Zhi-chun, LIN Jian-guo 2100
Luminescence properties of Sr2Al14O25:Eu2+,Dy3+ phosphors prepared by co-precipitation hydrothermal method DU Hong-li, WANG Li-ying, XU Jia-bin, CHEN Yan-wen, WU Li-ming, GUO Dong-cai 2107
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
Origin and evolution of ore-forming material of Hutouya polymetallic deposit LEI Yuan-bao, LAI Jian-qing, WANG Xiong-jun, SU Sheng-shun, WANG Shou-liang, TAO Shi-long 2117
Difference between Na2SO4 and Na2CO3 on Al-Fe separation of high aluminum iron ores LIU Mu-dan, JIANG Tao, LI Guang-hui, LIU Yong, LIU Zhen-zhen 2129
Complex leaching and kinetics of Baotou mixed rare earth concentrate ZHANG Xiao-wei, LI Mei, LIU Zhao-gang, HU Yan-hong, WANG Mi-tang, LIU Jia, YANG Jian-ping 2137
Enrichment of nickel ions by ion-exchange adsorption from leaching solution of nickel-bearing laterite YANG Cheng-wu, LIAO Ya-long, PENG Zhi-qiang 2145
Microwave assisted leaching of copper anode slime based on Taguchi methods MA Zhi-yuan, YANG Hong-ying, CHEN Guo-bao, Lü Yang, TONG Lin-lin 2152
Reductive leaching and leaching kinetics of low-grade pyrolusite ores using oat straw as reductant MAN Rui-lin, CHANG Wei, WU Qi, XUE Jian-rong 2158
Leaching of Au from refractory gold ore in thiourea-thiocyanate solutions and stability of lixiviants YANG Xi-yun, LIU Zheng-kun, GUO Kong-bin, XU Hui, SHI Xi-chang 2164
Extraction technology of vanadium and chromium from vanadium slags in presence of activated carbon PAN Zi-wei, WANG Da-wei, DU Hao, CHEN Gang, ZHENG Shi-li, WANG Shao-na, ZHANG Yi 2171
Comparative research on solid state decarburization kinetics of high-carbon ferrochrome powder by microwave heating and conventional heating LI Xiao-guang, CHEN Jin, HAO Jiu-jiu, HAN Pei-de, LIU Jin-ying 2181
Simulation of magnetic field on tracked permanent magnetic separator based on ANSYS LU Dong-fang, WANG Yu-hua, HE Ping-bo, SUN Wei, HU Yue-hua 2188

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn