Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第23卷    第1期    2013年1月


结构材料
孪晶界对AZ31镁合金静态再结晶的影响 丁雪征,刘天模,陈  建,张  瑜,卢立伟 1
热处理对Mg-3Sn-1Y合金显微组织及显微硬度的影响 徐春杰1,屠  涛1,马  涛1,余  玲1,张忠明1,王锦程2 9
第二相粒子在Mg-Gd-Y-Nd-Zr合金局部腐蚀中的作用机制 刘  俊,陈明安,马聪聪,黄宇迪,张新明,邓运来 15
真空低压消失模壳型铸造和消失模铸造铝合金组织和性能对比 蒋文明1, 2,樊自田2,刘德均2 22
含有裂纹的Al-Mg合金构件电磁热止裂 付宇明,王俊丽,郑丽娟,向  龙,张金森 29
Al-Mg-Si-Cu合金时效状态对疲劳过程及断裂特征的影响 黄昌军,刘春辉,陈江华,冯佳妮,桑  益,廖元飞,陈  刚 35
7085铝合金的热变形组织演变及动态再结晶模型 陈学海1, 2,陈康华1,董朋轩1,彭国胜1,陈送义1 44
低频电磁铸造细化铝合金组织的机理 左玉波,赵志浩,朱庆丰,崔建忠 51
锆溶胶对铝合金微弧氧化过程的影响 王晓芳,李卫平,刘慧丛,朱立群 56
超声波作用下SiCp/Al复合材料焊缝的凝固组织及其断裂特征 许志武1,马  星1,马  琳1,闫久春1,杨士勤1,杜善义2 63
Ni75AlxV25-x合金中异相界面成分演化的微观相场模拟 张明义1, 2,杨  坤1,陈  铮1,王永欣1,张嘉振2 73
K418合金车用增压涡轮热裂倾向性分析及预测 石照夏,董建新,张麦仓,郑  磊 82
A356/SiCp垂直向上吸铸增强颗粒的流动与分布 孙凤振,赵海东,赵  宇,董普云,陈飞帆 91
CeO2对铌硅基超高温合金硅化物渗层组织及抗氧化性能的影响 张  艺,郭喜平 99
热处理制度对GH4169G合金微观组织与蠕变性能的影响 田素贵1,王  欣1,刘  臣1,孙文儒2 108
电铸Ni-W合金热压缩变形的流变行为 成生伟,田文怀 116
Ti-6Al-4V钛合金陶瓷湿喷丸表面强化微观组织与疲劳性能 陈国清1,田唐永1,张新华2,李志强2,周文龙1 122
p-CuCr0.91Mg0.09O2/n-Si p-n结的制备与电学特性 董国波1,张  铭2,李杨超2,王  玫1,李英姿1,李朝荣1,黄安平1,严  辉2 128
功能材料
加压氧化法制备LiNi0.8Co0.15Al0.05O2正极材料 刘万民1, 2,胡国荣1,彭忠东1,杜  柯1,曹雁冰1,刘  强1,黄金龙1 133
EDTA-柠檬酸络合法制备阳极催化剂La0.7Sr0.3Cr0.87Y0.13O3-δ及热力学分析 严  涵1,朱秀芳1,钟  秦1,谭文轶2 141
有机添加剂对碱性条件下电镀铋的影响 欧青海,戴亚堂,张欢,马  丽,马  欢,申  振 147
铝电解NiFe2O4基惰性阳极材料纤维增强体的选择 华中胜1,姚广春2,龙秀丽2,王海川1,赵  卓1 154
高分子辅助化学溶液沉积法制备涂层导体SrZrO3(SZO)缓冲层 张  欣1,王文涛1,张  勇1,张  敏1,张  酣2,雷  鸣1,赵  勇1, 3 162
离子取代镍基铁氧体的性能及吸波涂层优化设计 刘  渊,刘祥萱,王煊军,张泽洋,李  茸,郭  磊 168
HP40合金表面原位制备复合氧化层 颜  磊,刘京雷,徐  宏,任衍伦 175
固体氚增殖材料Li2TiO3制备研究进展 李运姣,徐  仓,李  林,王轩宇,孔  龙 182
连铸直接成形矩形断面铜包铝复合材料界面及其在轧制中的变化 吴永福1,2,刘新华1,2,谢建新1,2 191
硅含量对喷射沉积SiCp/Al-Si功能梯度复合材料摩擦磨损性能的影响 苏  斌,严红革,陈吉华,陈  刚,杜嘉庆 201
CuYSi-Mg60Cu30Y10块体非晶合金复合材料的晶化行为 邵  阳,陈  刚,赵玉涛 212
基于电磁场与流场耦合的电沉积加工过程仿真 吴蒙华,刘新功,王元刚,贾卫平 219
矿业工程 • 冶金工程 • 化学与化工
高含泥氧化铜矿水洗-分级堆浸工艺 王少勇1, 2,吴爱祥1, 2,王洪江1, 2,尹升华1, 2,顾晓春3 229
含碳酸盐赤铁矿石磁选精矿的强化分散浮选 罗溪梅1, 2,印万忠1,姚  金1,孙传尧2,曹  阳1,马英强1,侯  英1 238
从氰化尾渣衍生物制备标准铅、锌精矿的新工艺 汪  洋1,2,李仕雄3, 诸向东3,於智泉3 247
铝酸钠溶液晶种分解过程中游离碱对晶体附聚的影响 徐荣广1, 2,王  志1,公旭中1,张  娟1, 2 254
在酵母粉或Cu2+胁迫下古菌Ferroplasma thermophilum与两种中度嗜热细菌的协同作用 仉丽娟,姬厚国,王玉光,万利利,周洪波 265
好氧和厌氧条件下Acidithiobacillus ferrooxidans菌对Fe3+氧化FeS2的影响 刘欣伟1,冯雅丽1,李浩然2,杨志超1,蔡震雷1 274
聚间苯二胺胺化改性及其对SO42-的吸附性能 王云燕,桑培伦,王海鹰,张理源,柴立元,苏  珍 282
3, 3'-二乙基-1, 1'-一缩二乙二醇二羰基双硫脲的合成、表征与性能 刘广义,任  恒,詹金华,钟  宏 290

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 23    No. 1    January 2013


Structural Materials
Effect of twin boundary on static recrystallization of AZ31 magnesium alloy DING Xue-zheng, LIU Tian-mo, CHEN Jian, ZHANG Yu, LU Li-wei 1
Effects of heat treatment on microstructure and microhardness of Mg-3Sn-1Y alloy XU Chun-jie, TU Tao, MA Tao, YU ling, ZHANG Zhong-ming, WANG Jin-cheng 9
Effect of second phase particles on localized corrosion of Mg-Gd-Y-Nd-Zr alloy LIU Jun, CHEN Ming-an, MA Cong-cong, HUANG Yu-di, ZHANG Xin-ming, DENG Yun-lai 15
Comparison of microstructures and properties of aluminum alloy between expendable pattern shell casting with vacuum and low-pressure and lost foam casting JIANG Wen-ming, FAN Zi-tian, LIU De-jun 22
Crack arrest of Al-Mg alloy component with cracks by electromagnetic heating FU Yu-ming, WANG Jun-li, ZHENG Li-juan, XIANG Long, ZHANG Jin-sen 29
Effect of precipitation state on fatigue process and fracture characteristics of Al-Mg-Si-Cu alloy HUANG Chang-jun, LIU Chun-hui, CHEN Jiang-hua, FENG Jia-ni, SANG Yi, LIAO Yuan-fei, CHEN Gang 35
Microstructure evolution and dynamic recrystallization model of 7085 aluminum alloy during hot deformation CHEN Xue-hai, CHEN Kang-hua, DONG Peng-xuan, PENG Guo-sheng, CHEN Song-yi 44
Mechanism of grain refinement of aluminum alloy achieved by low frequency electromagnetic casting process ZUO Yu-bo, ZHAO Zhi-hao, ZHU Qing-feng, CUI Jian-zhong 51
Influence of zirconia sol on microarc oxidation process of aluminum alloys WANG Xiao-fang, LI Wei-ping, LIU Hui-cong, ZHU Li-qun 56
Solidified microstructure of SiCp/Al composites bonds under ultrasonic vibration and their fracture characteristics XU Zhi-wu, MA Xing, MA Lin, YAN Jiu-chun, YANG Shi-qin, DU Shan-yi 63
Microscopic phase-field simulation of composition evolution of heterointerfaces in Ni75AlxV25-x alloys ZHANG Ming-yi, YANG Kun, CHEN Zheng, WANG Yong-xin, ZHANG Jia-zhen 73
Hot tearing susceptibility analysis and prediction of K418 superalloy for auto turbocharger turbine wheel SHI Zhao-xia, DONG Jian-xin, ZHANG Mai-cang, ZHENG Lei 82
Flow and distribution of reinforced particulates in A356/SiCp vertical upwards suction casting SUN Feng-zhen, ZHAO Hai-dong, ZHAO Yu, DONG Pu-yun, CHEN Fei-fan 91
Effect of CeO2 on microstructure and oxidation resistance of silicide coatings prepared on Nb-silicide-based ultrahigh temperature alloy ZHANG Yi, GUO Xi-ping 99
Influence of heat treatment regimes on microstructure and creep properties of GH4169G alloy TIAN Su-gui, WANG Xin, LIU Chen, SUN Wen-ru 108
Flow stress behavior of electroformed Ni-W alloy under hot compression deformation CHENG Sheng-wei, TIAN Wen-huai 116
Microstructure and fatigue properties of Ti-6Al-4V titanium alloy treated by wet shot peening of ceramic beads CHEN Guo-qing, TIAN Tang-yong, ZHANG Xin-hua, LI Zhi-qiang, ZHOU Wen-long 122
Synthesis and electrical properties of p-CuCr0.91Mg0.09O2/n-Si p-n junction DONG Guo-bo, ZHANG Ming, LI Yang-chao, WANG Mei, LI Ying-zi, LI Chao-rong, HUANG An-ping, YAN Hui 128
Functional Materials
Synthesis of LiNi0.8Co0.15Al0.05O2 cathode materials under elevated oxygen pressure LIU Wan-min, HU Guo-rong, PENG Zhong-dong , DU Ke, CAO Yan-bing, LIU Qiang, HUANG Jin-long 133
Synthesis and thermodynamic analysis of La0.7Sr0.3Cr0.87Y0.13O3?δ prepared by EDTA-citrate complexing method YAN Han, ZHU Xiu-fang, ZHONG Qin, TAN Wen-yi 141
Effects of organic agents on electrodeposition of bismuth in alkalinity solutions OU Qing-hai, DAI Ya-tang, ZHANG Huan, MA Li, MA Huan, SHEN Zhen 147
Selection of fiber reinforcement for NiFe2O4-based inert anode materials in aluminum electrolysis HUA Zhong-sheng, YAO Guang-chun, LONG Xiu-li, WANG Hai-chuan, ZHAO Zhuo 154
Preparation of SrZrO3 (SZO) buffer layer for coated conductors by polymer-assisted chemical solution deposition method ZHANG Xin, WANG Wen-tao, ZHANG Yong, ZHANG Min, ZHANG Han, LEI Ming, ZHAO Yong 162
Performance of nickel ferrite replaced by different ions and optimization design of absorbing coating LIU Yuan, LIU Xiang-xuan, WANG Xuan-jun, ZHANG Ze-yang, LI Rong, GUO Lei 168
In-situ preparation of compound oxidation scales on HP40 alloy YAN Lei, LIU Jing-lei, XU Hong, REN Yan-lun 175
Research progress on fabrication of Li2TiO3 solid tritium breeder materials LI Yun-jiao, XU Cang, LI Lin, WANG Xuan-yu, KONG Long 182
Interface of copper cladding aluminum composite materials with rectangle section fabricated by horizontal core-filling continuous casting and its evolvement in rolling process WU Yong-fu, LIU Xin-hua, XIE Jian-xin 191
Effect of silicon content of substrate on wear properties of spray-deposited SiCp/Al-Si functionally gradient composites SU Bin, YAN Hong-ge, CHEN Ji-hua, CHEN Gang, DU Jia-qing 201
Crystallization behavior of CuYSi-Mg60Cu30Y10 bulk amorphous alloy matrix composite SHAO Yang, CHEN Gang, ZHAO Yu-tao 212
Simulation of electrodeposition process based on electromagnetic coupling with flow field WU Meng-hua, LIU Xin-gong, WANG Yuan-gang, JIA Wei-ping 219
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
Craft of wash-classification of heap leaching used in high-clay copper oxide ore WANG Shao-yong, WU Ai-xiang, WANG Hong-jiang, YIN Sheng-hua, GU Xiao-chun 229
Flotation separation of magnetic separation concentrate of refractory hematite containing carbonate with enhanced dispersion LUO Xi-mei, YIN Wan-zhong, YAO Jin, SUN Chuan-yao, CAO Yang, MA Ying-qiang, HOU Ying 238
Innovative technology for preparing lead and zinc concentrates from cyanide tailing derivatives WANG Yang, LI Shi-xiong, ZHU Xiang-dong, YU Zhi-quan 247
Effect of free caustic alkali on agglomeration in seeded precipitation of sodium aluminate solution XU Rong-guang, WANG Zhi, GONG Xu-zhong, ZHANG Juan 254
Synergies between archaea Ferroplasma thermophilum and two moderately thermophilic bacteria under stress of yeast extract or Cu2+ ZHANG Li-juan, JI Hou-guo, WANG Yu-guang, WAN Li-li, ZHOU Hong-bo 265
Effect of Acidithiobacillus ferrooxidans on pyrite oxidation by ferric iron under aerobic and anaerobic conditions LIU Xin-wei , FENG Ya-li, LI Hao-ran , YANG Zhi-chao, CAI Zhen-lei 274
Aminated modification of poly(m-phenylenediamine) and its application to adsorption of SO42- WANG Yun-yan, SANG Pei-lun, WANG Hai-ying, ZHANG Li-yuan, SU Zhen 282
Synthesis, characterization and properties of 3,3'-diethyl-1,1'-oxydiethylenedicarbonylbis(thiourea) LIU Guang-Yi, REN Heng, ZHAN Jin-Hua, ZHONG Hong 290

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn