Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第22卷    第12期    2012年12月


结构材料
不同轧制工艺对AZ31镁合金薄板室温成形性能的影响 刘华强,唐  荻,胡水平,米振莉,王  哲 3293
残留结晶相对Al-Mg-Si-Cu合金晶间腐蚀行为的影响 李  海1, 2,孟  林1, 2,王芝秀1, 2, 3,黄  玲1, 2,李  蔚1, 2,宋仁国1, 2,郑子樵3 3300
电子束焊接2A14铝合金接头的组织与特征 王亚荣,滕文华,余  洋,樊亚丽 3307
高速列车用高强铝合金焊接接头疲劳裂纹的扩展特性 闫德俊1, 2,刘雪松2,方洪渊2,赵华生2, 3,彭爱林2, 4,杨建国2,张  健2 3313
考虑淬火残余应力铝合金厚板中椭圆裂纹Ⅰ型强度因子计算 丁华锋,朱才朝,李大峰,杜雪松,刘明勇 3320
接触载荷对7075铝合金扭转复合微动摩擦学行为的影响 沈明学1, 2,杨  莎1,周  琰1,蔡振兵1,朱旻昊1 3327
半固态A356铝合金微凸台阵列触变成形充型过程数值模拟 唐  培1, 2,梅德庆1, 2,姚喆赫1, 2,陈子辰1, 2 3334
汽车用5182铝合金板温冲压实验研究及数值模拟 陈婕尔1,王孟君1, 2,杨  刚1,周  威1,李光耀2 3342
Cu含量对Al-Mg-Si-Cu合金微观组织和性能的影响 王芝秀1, 2, 3,李  海2, 3,顾建华2, 3,宋仁国2, 3,郑子樵1 3348
N在γ-Ni/γ′-Ni3Al相界区域的占位趋势与脆化作用 彭  黎1, 2,刘云国1,杜付明2,文大东2,黄利群3,彭  平2 3356
铸钢0Cr13Ni5Mo表面电火花沉积YG8涂层的组织和性能 张瑞珠,郭  鹏,王建升,严大考,李静瑞 3366
固溶处理对准共晶Al-Si合金显微组织及力学性能的影响 石  磊,王有祁,王  英,苏  辉,甄立玲 3372
低Nb含量Ti-Mo-Nb-Zr-Sn BCC低弹性模量固溶体合金的成分设计 刘恩雪1,王  清1,马仁涛2,查钱锋1,冀春俊3,董  闯1 3378
基于田口方法的挤压铸造Al5Cu0.4Mn合金宏观偏析 甘耀强,张大童,张卫文,张文,李元元 3386
二阶段热压烧结工艺对WC-MgO复合材料组织和力学性能的影响 欧阳辰鑫1, 3,朱世根1, 2, 3,马  俊1, 3,瞿海霞1,李  潜1 3395
SiCp/Al-Fe-V-Si的板材成形过程中显微组织和力学性能的演变 贺毅强1,陈振华2 3402
球磨改性和表面活性剂添加对超细98W-1Ni-1Fe粉末性能的影响 韩  勇,范景莲,刘  涛,成会朝,高  扬,田家敏 3409
初生纳米晶对Ti40Zr25Ni8Cu9Be18非晶合金结构稳定性的影响 周  勋,寇宏超,白  洁,王  军,李金山,周  廉 3416
功能材料
球磨方式对多壁碳纳米管形貌和结构的影响 孟振强,刘如铁,熊拥军,赵福安,李溪滨 3421
载荷对AuNi9/金镀层摩擦副摩擦磨损性能的影响 王新平,肖金坤,张  雷,周科朝 3427
模压技术制备C/C-BN复合材料的摩擦学特性 袁锡藩1,葛毅成2,易茂中2 3432
Br掺杂纳米多孔TiO2的制备及其吸附性能 张文莉,燕  云,吕红艳,张福梅,蒋银花 3439
喷射沉积电子封装用高硅铝合金的研究进展 刘文水,王日初,彭超群,莫静贻,朱学卫,彭  健 3446
工艺参数对镍基合金薄壁筒旋压稳定性的影响 张怀亮1, 2,邹佰文2,肖  雷2,周  胜2,邓  锐2 3456
Al2O3/Cu-WC复合材料热变形行为及热加工图 冯  江1, 2,田保红1, 2,孙永伟1, 2,刘  勇1, 2,张  毅1, 2,任凤章1, 2 3462
不同择优生长取向角枝晶生长的数值模拟 石玉峰,许庆彦,柳百成 3468
熔炼路线制备涂层导体用无磁性织构的Ni-12%V合金基带 袁冬梅,索红莉,高忙忙,马  麟,王金华,刘  敏 3476
LiFe0.95Ni0.02Mn0.03PO4/C的合成及电化学性能 吴  强,王先友,舒洪波,杨顺毅,王英平,杨秀康,白艳松,魏启亮 3482
纳米多孔WO3薄膜电极的制备及其光电化学性质 陈  香,李  洁,李文章,陈启元 3487
Ti基氮化处理对IrO2-Ta2O5涂层阳极服役性能的影响 闫镇威,孟惠民,金  莹 3495
铜箔在锂离子二次电池中的应用与发展 江  鹏,于彦东 3504
Ni-cBN复合镀层制备工艺参数对性能的影响 王翠凤1,邱锡荣2,李泓原2,黄重铨2 3511
钨基面向等离子体材料的研究进展 朱玲旭1, 2, 燕青芝1,郎少庭1,徐  磊1,葛昌纯1, 2 3522
电磁感应辅助等离子体熔炼去除金属硅中的硼 蔡 靖1,卢成浩1,李锦堂1,马文会2,罗学涛1 3529
矿业工程 • 冶金工程 • 化学与化工
水玻璃对菱锌矿与石英浮选分离的影响 张国范,崔萌萌,朱阳戈,石  晴,罗  娜 3535
铬酸钠溶液中和除铝浆液沉降性能的改善 刘桂华,李云峰,齐天贵,张玉峰,李小斌 3542
盐酸体系中电沉积制备砷锑合金 曹华珍,万强波,单海鹏,阮慧敏,郑国渠 3548
铝灰中AlN的水解行为 姜  澜,邱明放,丁友东,苏  楠,姚  泉 3555
Ce3+对YPO4:Tb3+,Ce3+微米球的发光调制及Tb3+与Ce3+间的能量传递 高永毅1,占世平1,钟  慧2 3562

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 22    No. 12    December 2012


Structural Materials
Effects of rolling technology on forming properties of AZ31 magnesium alloy sheets at room temperature LIU Hua-qiang, TANG Di, HU Shui-ping, MI Zhen-li, WANG Zhe 3293
Effect of residual constituents on intergranular corrosion behavior of Al-Mg-Si-Cu alloy LI Hai, MENG Lin, WANG Zhi-xiu, HUANG Ling, LI Wei, SONG Ren-guo, ZHENG Zi-qiao 3300
Microstructure and characteristics of joint of electron beam welds of 2A14 aluminum alloy WANG Ya-rong, TENG Wen-hua, YU Yang, FAN Ya-li 3307
Fatigue crack propagation characteristics of high strength aluminum alloy welded joint used by high speed train YAN De-jun, LIU Xue-song, FANG Hong-yuan, ZHAO Hua-sheng, PENG Ai-lin, YANG Jian-guo, ZHANG Jian 3313
ModeⅠstress intensity factor calculation of elliptical cracks in aluminum alloy thick plates considering quenching residual stress DING Hua-feng, ZHU Cai-chao, LI Da-feng, DU Xue-song, LIU Ming-yong 3320
Effect of contact load on dual-rotary fretting tribological behavior of 7075 aluminum alloy Shen Ming-xue, Yang sha, Zhou Yan, Cai Zhen-bing, Zhu Min-hao 3327
Numerical simulation of cavity-filling procedures for micro-pin-fin array thixoforming with semi-solid A356 aluminium alloy TANG Pei, MEI De-qing, YAO Zhe-he, CHEN Zi-chen 3334
Experimental study and numerical simulation of warm stamping of 5182 aluminum alloy for automotive body CHEN Jie-er, WANG Meng-jun, YANG Gang, ZHOU Wei, LI Guang-yao 3342
Effect of Cu content on microstructures and properties of Al-Mg-Si-Cu alloys WANG Zhi-xiu, LI Hai, GU Jian-hua, SONG Ren-guo, ZHENG Zi-qiao 3348
Site preference of N and N-induced embrittlement at γ-Ni/γ′-Ni3Al interface PENG Li, LIU Yun-guo, DU Fu-ming, WEN Da-dong, HUANG Li-qun, PENG Ping 3356
Microstructures and properties of YG8 coating on 0Cr13Ni5Mo cast steel fabricated by electro-spark deposition ZHANG Rui-zhu, GUO Peng, WANG Jian-sheng, YAN Da-kao, LI Jing-rui 3366
Effect of solution treatment on microstructure and mechanical properties of quasi eutectic Al-Si alloy SHI Lei, WANG You-qi, WANG Ying, SU Hui, ZHEN Li-ling 3372
Composition design of Ti-Mo-Nb-Zr-Sn BCC solid solution alloys with low elastic modulus and low Nb content LIU En-xue, WANG Qing, MA Ren-tao, ZHA qian-feng, JI Chun-jun, DONG Chuang 3378
Macrosegregation in squeeze-cast Al5Cu0.4Mn alloy based on Taguchi method GAN Yao-qiang, ZHANG Da-tong, ZHANG Wei-wen, ZHANG Wen, LI Yuan-yuan 3386
Effect of two-step hot-pressing sintering technique on microstructure and mechanical properties of WC-MgO nanocomposite OUYANG Chen-xin, ZHU Shi-gen, MA Jun, QU Hai-xia, LI Qian 3395
Microstructure and mechanical property evolution of SiCp/Al-Fe-V-Si composite during sheet forming process HE Yi-qiang, CHEN Zhen-hua 3402
Effect of ball milling modification and surfactant addition on properties of ultrafine 98W-1Ni-1Fe powder HAN Yong, FAN Jing-lian, LIU Tao, CHENG Hui-zhao, GAO Yang, TIAN Jia-min 3409
Effect of initial nanocrystal on structural stability of Ti40Zr25Ni8Cu9Be18 amorphous alloy ZHOU Xun, KOU Hong-chao, BAI Jie, WANG Jun, LI Jin-shan, ZHOU Lian 3416
Functional Materials
Effect of ball milling on morphology and structure of multi-walled carbon nanotubes MENG Zhen-qiang, LIU Ru-tie, XIONG Yong-jun, ZHAO Fu-an, LI Xi-bin 3421
Effect of load on friction and wear behavior of AuNi9/Au coating tribo-couple WANG Xin-ping, XIAO Jin-kun, ZHANG Lei, ZHOU Ke-chao 3427
Sliding friction characteristic of C/C-BN prepared by mold-pressing YUAN Xi-fan, GE Yi-cheng, YI Mao-zhong 3432
Preparation and adsorption property of Br-doped nano porous TiO2 ZHANG Wen-li, YAN Yun, LÜ, Hong-yan, ZHANG Fu-mei, JIANG Yin-hua 3439
Research progress of spray deposited high Si-Al alloys for electronic packaging LIU Wen-shui, WANG Ri-chu, PENG Chao-qun, MO Jing-yi, ZHU Xue-wei, PENG Jian 3446
Effects of process parameters on spinning stability of nickel-based alloy thin-walled tube ZHANG Huai-liang, ZOU Bai-wen, XIAO Lei, ZHOU Sheng, DENG Rui 3456
Hot deformation behavior and processing maps of Al2O3/Cu-WC composites FENG Jiang, TIAN Bao-hong, SUN Yong-wei, LIU Yong, ZHANG Yi, REN Feng-zhang 3462
Numerical simulation of dendrite growth with different preferred growth orientation angles SHI Yu-feng, XU Qing-yan, LIU Bai-cheng 3468
Fabrication of non-magnetic and cube textured Ni-12%V alloy substrate used for coated conductors by melting route YUAN Dong-mei, SUO Hong-li, GAO Mang-mang, MA Lin,WANG Jin-hua, LIU Min 3476
Synthesis of LiFe0.95Ni0.02Mn0.03PO4/C and its electrochemical properties WU Qiang, WANG Xian-you, SHU Hong-bo, YANG Shun-yi, WANG Ying-ping, YANG Xiu-kang, BAI Yan-song, WEI Qi-liang 3482
Preparation and photoelectrochemical properties of nano-porous tungsten trioxide films electrode CHEN Xiang, LI Jie, LI Wen-zhang, CHEN Qi-yuan 3487
Effect of nitrogen treatment of Ti substrate on service performance of IrO2-Ta2O5 coating YAN Zhen-wei, MENG Hui-min, JING Ying 3495
Application and development of copper foils for lithium ion secondary batteries JIANG Peng, YU Yan-dong 3504
Effect of preparation parameters on properties of electrodeposited Ni-cBN composite coatings WANG Cui-feng, CHIOU Shi-yung, LI Hung-yuan, HUANG Chung-chuan 3511
Research progress of tungsten-base materials as plasma facing materials ZHU Ling-xu, YAN Qing-zhi, LANG Shao-ting, XU Lei, GE Chang-chun 3522
Boron removal from metallurgical silicon by plasma melting using electromagnetic induction CAI Jing, LU Cheng-hao, LI Jin-tang, MA Wen-hui­,, LUO Xue-tao 3529
Mine
Effect of water glass on flotation separation of smithsonite and quartz ZHANG Guo-fan, CUI Meng-meng, ZHU Yang-ge, SHI Qing, LUO Na 3535
Improvement in settlement property of alumina tri-hydrate slurry by neutralization in sodium chromate solution LIU Gui-hua, LI Yun-feng, QI Tian-gui, ZHANG Yu-feng, LI Xiao-bin 3542
Electrodeposition of AsSb alloy from hydrochloric acid system CAO Hua-zhen, WAN Qiang-bo, SHAN Hai-peng, RUAN Hui-min, ZHENG Guo-qu 3548
Hydrolysis behavior of AlN in aluminum dross JIANG Lan, QIU Ming-fang, DING You-dong, SU Nan, YAO Quan 3555
Tuning of Ce3+ doping on emissions of YPO­4:Tb3+, Ce3+ microspheres and energy transfer between Ce3+ and Tb3+ GAO Yong-yi, ZHAN Shi-ping, ZHONG Hui 3562

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn