Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第21卷    第8期    2011年8月


结构材料
镁合金等通道转角挤压过程中的晶粒细化机制 何运斌1, 2,潘清林1, 2,刘晓艳1, 2,李文斌1, 2 1785
Mg15Al镁合金ECAP变形过程中β相的
碎化机理及动态析出行为
王红霞1, 2,周康康1, 2,梁  伟1, 2,龚家林1, 2,曹晓卿1,赵兴国1, 2 1794
应变速率对AZ61镁合金动态再结晶行为的影响 杨续跃1, 2,张之岭1,张  雷1,吴新星1,王  军1 1801
渗注磷酸盐对AZ31镁合金疲劳裂纹扩展的影响 贺显聪1, 2,王章忠1,白允强1,巴志新1,李晓泉1,沈鸿烈2 1808
温热弯曲成形过程中AZ31镁合金型材的微观织构演变 肖  寒1, 2,宋广胜1,严  操1,张士宏1, 2,阮立群3,张兴国2 1814
Al3Zr析出对Al-7.81Zn-1.62Mg-1.81Cu合金组织和
织构的影响
鲍子成1, 2,万  里2,张云崖2,邓运来2 1820
Mg-Zn-Ca合金的非晶形成能力及力学性能 邱克强,杨君宝,尤俊华,任英磊 1828
热等静压温度对FGH95合金组织和持久性能的影响 谢  君1,田素贵1,周晓明2,钱本江1,于莉丽1,汪武祥2 1834
改进型ECAP路径对Al-Mg2Si原位复合材料
组织与力学性能的影响
边丽萍,梁  伟,马  建,张文利,薛晋波,王红霞,赵兴国 1841
工艺参数对金属粉末共注射成形芯层熔体形貌的影响 王光耀,何  浩,李益民,张健光 1847
局部腐蚀对不同热处理状态7055铝合金拉伸性能的影响 廖文博1,刘心宇1, 2,刘胜胆2,陈  慧2,张新明2 1855
不同温度下超细晶铜的准静态压缩力学行为 谢  奎,索  涛,李玉龙,赵  峰 1862
煅烧温度对高体积分数SiCp/Al复合材料性能的影响 刘君武,李青鑫,丁  锋,黄思德,郑治祥 1869
半固态处理对Zr60Cu17.5Al7.5Ni10Ti5非晶形成能力和
力学性能的影响
寇生中1, 2,陈  延1,刘广桥1,李  娜1,郑宝超1,黄文军1,索红莉2 1875
采用热焓平衡旋转磁场装置制备半固态浆料 张小立1, 2,李廷举3,谢水生4 1881
Ni3Al基合金IC6与变形合金GH3030间
真空钎焊接头的组织与力学性能
王玉叶1,李树索1,于静静1,韩雅芳1, 2 1887
功能材料
Al2O3陶瓷基片电子封装材料研究进展 刘  兵,彭超群,王日初,王小锋,李婷婷,王志勇 1893
U-Nb合金的可逆塑性变形及其消除方法 何立峰,黄  海,杨建雄,任大鹏,张延志 1904
工艺参数对高速电镀锌层形貌和织构的影响 顾训雷,单玉桥,刘常升 1910
制备工艺对N型Bi2Te2.4Se0.6合金热电性能的影响 尹振忠,朱铁军,沈俊杰,杨胜辉,赵新兵 1916
电解液中甲酰胺浓度对阳极氧化制备TiO2纳米管阵列
形貌和光催化性能的影响
马  清1,刘绍军1, 2,翁履谦1,董文艺3 1921
含Mo金属陶瓷微波吸收材料的制备与性能 俞  雨1,  2,程继贵1, 2,梁槟星1 1929
非晶态Ni-W-P镀层退火晶化和激光晶化
组织结构的演变
刘  宏1,郭荣新2,李  莎1,宗  云1,何冰清1 1936
Co0.5Ni0.5Fe2O4纳米纤维的静电纺丝法
制备、表征及其磁性能
向  军1, 2,褚艳秋1,周广振1,郭银涛1,沈湘黔2 1944
金刚石/碳化硅/铝复合材料的热膨胀性能 薛  晨,于家康,谭  雯 1953
不同相对湿度下C/C复合材料的摩擦磨损性能 岳葆林,徐惠娟,易茂中 1960
化学气相沉积硬质合金TiN/TiCN/Al2O3/TiN
多层涂层的抗氧化性能
陈响明1, 2,易丹青1,黄道远1,李秀萍2,刘会群1,吴春萍1 1967
金修饰纳米多孔Pd催化剂对甲酸氧化的电催化活性 牛凤娟1,易清风1,刘云清2 1974
矿业工程 • 冶金工程 • 化学与化工
基于TEA和EDTA·2Na双络合体系的
酸性镀铜工艺及镀层特性
张  震,李  俊 1980
酸洗去除冶金硅中的典型杂质 李成义1, 2,赵立新2, 3,王  志1,郭占成2,王永刚1 1988
Al基体表面熔盐化学法镀Pb工艺 蒋良兴,郝科涛,吕晓军,赖延清,洪  波,李  渊,李  劼,刘业翔 1997
不同价态碘对溶胶−凝胶法制备的I-TiO2光催化剂
结构和性能的影响
任建坤,曹金丽,王玉萍,王维安,彭盘英 2003
络合−超滤技术处理含镉废水 邱运仁,郜国英,刘  敏 2012
TiO2可见光催化H2O2降解水中的有机污染物 唐建军1,范小江2,邹  原1,刘淑君2,周康根2 2017

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 21    No. 8    August 2011


Structural Materials
Grain refinement mechanism of magnesium alloy during
equal channel angular pressing process
HE Yun-bin, PAN Qing-lin, LIU Xiao-yan, LI Wen-bin 1785
Fragmentation mechanism and dynamic precipitation behavior of
 β phase in Mg15Al magnesium alloy during ECAP
WANG Hong-xia, ZHOU Kang-kang, LIANG Wei, GONG Jia-lin, CAO Xiao-qing, ZHAO Xing-guo 1794
Influence of strain rate on dynamic recrystallization behavior of
 AZ61 magnesium alloy
YANG Xu-yue, ZHANG Zhi-ling, ZHANG Lei, WU Xin-xing, WANG Jun 1801
Effects of immersing phosphate on
fatigue crack propagation in AZ31 magnesium alloy
HE Xian-cong, WANG Zhang-zhong, BAI Yun-qiang, BA Zhi-xin, LI Xiao-quan, SHEN Hong-lie 1808
Microtexture evolution of
AZ31 magnesium alloy profile during warm bending process
XIAO Han, SONG Guang-sheng, YAN Cao, ZHANG Shi-hong, RUAN Li-qun, ZHANG Xing-guo 1814
Effect of Al3Zr precipitation on microstructures and textures of Al-7.81Zn-1.62Mg-1.81Cu alloy plates BAO Zi-cheng, WAN Li, ZHANG Yun-ya, DENG Yun-lai 1820
Glass-forming ability and mechanical properties for
Mg-Zn-Ca alloys
QIU Ke-qiang, YANG Jun-bao, YOU Jun-hua, REN Ying-lei 1828
Effects of hot isostatic pressing temperature on
microstructure and stress rupture properties of FGH95 superalloy
XIE Jun, TIAN Su-gui, ZHOU Xiao-ming, QIAN Ben-jiang, YU Li-li, WANG Wu-xiang 1834
Effect of modified ECAP route on microstructure and
mechanical property of Al-Mg2Si in-situ composite
BIANLi-ping, LIANG Wei, MA Jian, ZHANG Wen-li, XUE Jin-bo, WANG Hong-xia, ZHAO Xing-guo 1841
Effects of processing parameters on core melt morphology of
metal powder co-injection molding
WANG Guang-yao, HE Hao, LI Yi-min, ZHANG Jian-guang 1847
Effects of local corrosion on tensile properties of
 7055 aluminum alloys after different aging treatments
LIAO Wen-bo, LIU Xin-yu, LIU Sheng-dan, CHEN Hui, ZHANG Xin-ming 1855
Quasi-static compressive behavior of ultrafine-grained copper at
different temperatures
XIE Kui, SUO Tao, LI Yu-long, ZHAO Feng 1862
Effect of calcination temperature on properties of
high volume fraction SiCp/Al composites
LIU Jun-wu, LI Qing-xin, DING Feng, HUANG Si-de, ZHENG Zhi-xiang 1869
Effect of semi-solid processing on glass forming ability and
mechanical properties of Zr60Cu17.5Al7.5Ni10Ti5 bulk amorphous alloys
KOU Sheng-zhong, CHEN Yan, LIU Guang-qiao, LI Na, ZHENG Bao-chao, HUANG Wen-jun, SUO Hong-li 1875
Semisolid slurry produced using
enthalpy equilibrium rotating magnetic fields device
ZHANG Xiao-li, LI Ting-ju, XIE Shui-sheng 1881
Microstructure and mechanical properties of vacuum brazing joint between Ni3Al-based alloy IC6 and wrought superalloys GH3030 WANG Yu-ye, LI Shu-suo, YU Jing-jing, HAN Ya-fang 1887
Functional Materials
Research progress in alumina ceramics substrate material for
electronic packaging
LIU Bing, PENG Chao-qun, WANG Ri-chu, WANG Xiao-feng, LI Ting-ting, WANG Zhi-yong 1893
Reversible plastic deformation and
elimination method of U-Nb alloy
HE Li-feng, HUANG Hai, YANG Jian-xiong, REN Da-peng, ZHANG Yan-zhi 1904
Effects of technological parameters on
morphology and texture of high speed galvanized coatings
GU Xun-lei, SHAN Yu-qiao, LIU Chang-sheng 1910
Effect of preparation methods on thermoelectric properties of
N-type Bi2Te2.4Se0.6 bulk alloys
YIN Zhen-zhong, ZHU Tie-jun, SHEN Jun-jie, YANG Sheng-hui, ZHAO Xin-bing 1916
Effect of formamide in electrolyte on morphology and
photocatalytic activity of TiO2 nanotube arrays by anodization
MA Qing, LIU Shao-jun, WENG Lü-qian, DONG Wen-yi 1921
Preparation and performance of
Mo-contained microwave-absorbing cermets
YU Yu, CHENG Ji-gui, LIANG Bin-xing 1929
Microstructures evolution of electroless amorphous Ni-W-P coating during laser and annealing crystallization LIU Hong, GUO Rong-xin, LI Sha, ZONG Yun, HE Bing-qing 1936
Electrospinning fabrication, characterization and
magnetic properties of Co0.5Ni0.5Fe2O4 nanofibers
XIANG Jun, CHU Yan-qiu, ZHOU Guang-zhen, GUO Yin-tao, SHEN Xiang-qian 1944
Thermal expansion behavior of diamond/SiC/Al composite XUE Chen, YU Jia-kang, TAN Wen 1953
Friction and wear properties of C/C composite materials under different relative humidities YUE Bao-lin, XU Hui-juan, YI Mao-zhong 1960
Thermal oxidation resistance of TiN/TiCN/Al2O3/TiN multilayer
 coatings on cemented carbide by chemical vapor deposition
CHEN Xiang-ming, YI Dan-qing, HUANG Dao-yuan, LI Xiu-ping, LIU Hui-qun, WU Chun-ping 1967
Electrocatalytic activity of Au modified nanoporous palladium
electrode for formic acid oxidation
NIU Feng-juan, YI Qing-feng, LIU Yun-qing 1974
Mine
Acid copper electrodepositing process and
coating properties based on system of TEA and EDTA·2Na
ZHANG Zhen, LI Jun 1980
Removal of representative impurities from
metallurgical grade silicon by acid leaching
LI Cheng-yi, ZHAO Li-xin, WANG Zhi, GUO Zhan-cheng, WANG Yong-gang 1988
Electroless Pb plating on Al substrate in molten salt JIANG Liang-xing, HAO Ke-tao, LÜ, Xiao-jun, LAI Yan-qing, HONG Bo, LI Yuan, LI Jie, LIU Ye-xiang 1997
Effect of different valence iodine on structure and
 activity of I-TiO2 photocatalysts synthesized by sol-gel method
REN Jian-kun, CAO Jin-li, WANG Yu-ping, WANG Wei-an, PENG Pan-ying 2003
Removal of cadmium from wastewater by complexation-ultrafiltration process QIU Yun-ren, GAO Guo-ying, LIU Min 2012
Degradation of organic pollutants with H2O2 photocatalyzed by
TiO2 under visible irradiation
TANG Jian-jun, FAN Xiao-jiang, ZOU Yuan, LIU Shu-jun, ZHOU Kang-gen 2017

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn