Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第8卷    第2期    1998年6月


材料科学与工程
多层喷射沉积6066铝合金半固态挤压 张    豪    陈振华    康智涛    周多三 191
高能量密度等离子体微晶化对Ni3Al高温氧化的影响 王永刚    马铁军    何业东    朱日彰     郑修麟 197
激光熔覆Ni-Cr-B-Si-C合金的组织及其摩擦磨损特性 李    强    王富耻*   雷廷权    陈彦斌    欧阳家虎    杨德庄 201
三层复合铝合金带材热轧复合包覆率的计算 甘卫平,韦家弘,肖亚庆,周   江 206
残余热应力对Si3N4/金属钎焊接头性能的影响 熊柏青    楚建新 职任涛    肖纪美    陆建栋    王连伟 210
内法兰环件辗扩成形尺寸控制方法 黄尚宇   朱春东    常志华    张韶华    沈成一    张    猛 214
热暴露和热盐暴露的交互作用对Ti811合金热盐应力腐蚀性能的影响 赵永庆    朱康英    李佐臣    吴清枝 全桂彝    王    稿    王玮琪    王小朝 218
短碳纤维增强锡基巴氏合金摩擦学特性 贺    林    朱    均 223
快速凝固Al88Cr2Ni10-xMnx(x=0,5,7 或10) 合金准晶相的形成 李明军    宋广生    吕衣礼    杨根仓    周尧和 228
Ti3Al+TiAl片层组织的不连续粗化转变 汪小平    郑运荣 233
Zn-Al合金的熔体结构特征及Cu和Fe的影响 耿浩然 ,周香林,马家骥,贾均 239
Cr对TiAl金属间化合物抗循环氧化性能的影响 唐兆麟    王福会 245
TiCl3氧化烧结制备纳米材料 陈士仁    邵艳群    唐    电 250
过饱和ZA27的尺寸收缩及其与组织转变的关系 陈云贵    涂铭旌    沈保罗    高升吉 254
原位TiC颗粒增强Al-Cu复合材料的组织及性能 刘金水    肖汉宁    舒    震    项品峰 259
锌对6063铝合金雪花状腐蚀的影响 余    庆    吴继勋    卢燕平 264
Al-Ti-C 中间合金晶粒细化剂的合成
及其细化晶粒作用
姜文辉    韩行霖 268
盘、柱状喷射沉积毛坯的形状控制及组织分析 范洪波    曹福洋    蒋祖龄    李庆春 272
铟锡氧化物纳米粉的显微结构 高愈尊    李永洪    张泰宋 278
聚苯乙烯对金属液充型过程的影响 魏尊杰    安阁英 282
颗粒增强铝基复合材料的组织与性能 凌兴珠    徐振民 286
硅片高温工艺与塑性形变 谢书银,万关良,李立本,张锦心 291
银精矿碱法熔炼工艺的扩大试验 徐盛明1,2    肖克剑2    汤志军2    沈国励1    俞汝勤1 303
选矿·冶金·化学
熔盐系相图特征检索和预报专家系统 王学业,邱冠周,王淀佐,李重河,陈念贻 295
用热分析技术研究氟碳铈精矿碳酸钠焙烧反应动力学 柳召刚,马莹,魏绪钧,徐秀芝,冯法伦 299
锌挥发窑余热锅炉设计 彭根南    阳绍伟    顾谦里    周凯林    雷    英 309
铂族金属二次资源等离子体冶金产物的物相分析 赵怀志 314
黄金洞焙砂浸金率低的原因分析 胡yao 沁    郁    强    周传华    李国勋 318
方铅矿-石灰-乙硫氮体系电化学调控浮选 王淀佐    顾帼华    刘如意1 322
11-钨锌合铝杂多酸的合成和表征及其催化性能 吴庆银1,2    翟玉春2 327
混合稀土碳酸盐晶型沉淀的制备 柳松,马荣骏 331
高增敏碘量法掩蔽连测微克量级锰和铬 张明浩    陈    波    张荃茹 方    正 335
地质·采矿
多层介质地层中有低速层出现时的陷模研究 张碧星 喻    明    熊    伟    兰从庆 340
陀螺定向的三角多项式拟合法 刘洪奇 347
测定岩爆岩石弹性变形能量指数的新方法 冯    涛    潘长良    王宏图    曹    平    王文星 352
块体理论中关键块滑落的概率分析收 赵    文 356
机电工程
离心磨矿机的工作状态模型 唐果宁 周    贤 360
凿岩过程推进压力反馈防卡钎计算机控制 胡均平    杨襄璧    吴万荣 364

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 8    No. 2    June 1998


MATERIALS SCIENCE AND ENGINEERING
SEMISOLID EXTRUSION TECHNOLOGY OF 6066 ALLOY PREPARED BY MULTI-LAYER SPRAY DEPOSITION Zhang Hao, Chen Zhenhua, Kang Zhitao and Zhou Duosan 191
INFLUENCE OF MICRO-CRYSTALLIZATION BY HIGH ENERGY DENSITY PLASMA ON HIGH TEMPERATURE OXIDATION OF Ni3Al Wang Yonggang, Ma Tiejun, He Yedong, Zhu Rizhang and Zheng Xiulin 197
MICROSTRUCTURES AND FRICTION AND WEAR PROPERTIES OF LASER-CLAD Ni-Cr-B-Si-C ALLOY Li Qiang, Wang Fuchi, Lei Tingquan, Chen Yanbin, Ouyang Jiahu and Yang Dezhuang 201
CALCULATION OF CLAD RATIO OF ALUMINUM ALLOY BRAZING SHEET MADE BY HOT ROLLING Gan Weiping and Wei Jiahong,Xiao Yaqing and Zhou Jiang 206
EFFECT OF RESIDUAL THERMAL STRESS ON PROPERTIES OF Si3N4/METAL BRAZING JOINTS Xiong Baiqing and Chu Jianxin,Zhi Rentao, Xiao Jimei, Lu Jiandong and Wang Lianwei 210
DIMENSION CONTROL METHOD OF RINGS WITH STEPPED HOLES DURING RING ROLLING PROCESS Huang Shangyu, Zhu Chundong, Chang Zhihua, Zhang Shaohua, Shen Chengyi and Zhang Meng 214
EFFECTS OF INTERACTION BETWEEN HOT EXPOSURE AND HOT SALT EXPOSURE ON HOT SALT STRESS CORROSION BEHAVIOR
OF Ti811 ALLOY
Zhao Yongqing, Zhu Kangying, Li Zuochen and Wu Qingzhi Quan Guiyi, Wang Gao, Wang Weiqi and Wang Xiaochao 218
TRIBOLOGICAL CHARACTERISTICS OF SHORT CARBON FIBER-REINFORCED Sn-MATRIX BABBITT ALLOY He Lin,Zhu Jun 223
QUASICRYSTALLINE PHASE FORMATION IN Al88Cr2Ni10-xMnx(x=0, 5, 7 OR 10) ALLOYS BY SPLAT-QUENCHING Li Mingjun, Song Guangsheng, Lu Yili, Yang Gencang and Zhou Yao he 228
DISCONTINUOUS COARSENING OF Ti3Al+ TiAl LAMELLAE Wang Xiaoping and Zheng Yunrong 233
STRUCTURE OF MOLTEN Zn-Al BASED ALLOYS AND EFFECTS OF Cu AND Fe ELEMENTS Geng Haoran, Zhou Xianglin and Ma Jiaji,Jia Jun 239
EFFECT OF Cr ON CYCLIC OXIDATION RESISTANCE OF TiAl INTERMETALLICS Tang Zhaolin and Wang Fuhui 245
TiCl3 OXIDATION AND SINTER TO PREPARE NANOMA TERIALS Chen Shiren, Shao Yanqun and Tang Dian 250
DIMENSIONAL SHRINKAGE OF SUPERSATURATED ZA27 AND INFLUENCE OF PHASE TRANSFORMATION Chen Yungui, Tu Mingjing, Shen Baoluo and Gao Shengji 254
MICROSTRUCTURE AND PROPERTIES OF IN-SITU SYNTHESIZED TiC PARTICULATE REINFORCED Al-Cu COMPOSITE Liu Jinshui, Xiao Hanning, Shu Zhen and Xiang Pinfeng 259
EFFECT OF ZINC CONTENT ON SNOWFLAKE-TYPE CORROSION OF 6063 ALLOY IN 5% NaOH SOLUTION Yu Qing, Wu Jixun and Lu Yanping 264
PREPARATION OF Al-Ti-C MASTER ALLOYS AND
THEIR GRAIN REFINING PROPERTIES
Jiang Wenhui and Han Xinglin 268
CONTROLLED SHAPES OF BILLETS OR DISCS PREFORM IN SPRAY FORMING AND ANALYSIS OF MICROSTRUCTURE Fan Hongbo, Cao Fuyang, Jiang Zuling and Li Qingchun 272
MICROSTRUCTURE OF NANOPHASE POWDER OF INIUM TIN OXIDE Gao Yuzun, Li Yonghong and Zhang Taisong 278
EFFECT OF POLYSTYRENE MATERIAL ON MOLTEN METAL FILLING PROCESS Wei Zunjie and An Geying 282
STRUCTURE AND PROPERTY OF PARTICLE REINFORCED ALUMINIUM MATRIX COMPOSITE Ling Xingzhu and Xu Zhenmin 286
ELEVATED TEMPERATURE PROCESS AND PLASTIC DEFORMATION OF SILICON WAFER Xie Shuyin,Wan Guanliang,Li Liben and Zhang Jinxin 291
REATMENT OF SILVER CONCENTRATE BY BASIC SMELTING PROCESS Xu Shengming, Xiao Kejian, Tang Zhijun, Sun Guoli and Yu Ruqin 303
MINERAL PROCESSING, METALLURGY AN
EXPERT SYSTEM FOR RETRIEVAL AND PREDICTION OF PROPERTIES IN SOME PHASE DIAGRAMS OF MOLTEN SALT SYSTEMS Wang Xueye,Qiu Guanzhou,Wang Dianzuo,Li Chonghe,Chen Nianyi 295
KINETICS OF ROAST REACTION OF BASTNASITE MIXED WITH SODIUM CARBONATE STUDIED BY THERMAL ANALYSIS Liu Zhaogang and Ma Ying,Wei Xujun, Xu Xiuzhi and Feng Falun 299
DESIGN OF WASTE HEAT BOILERS FOR ZINC VOLATIZATION KILNS Peng Gennan, Yang Shaowei, Gu Qianli, Zhou Kailin and Lei Ying 309
ANALYSIS OF PHASES IN METALLURGICAL PRODUCTS OF PLASMA TREATING PGMs SECONDARY RESOURCES Zhao Huaizhi 314
ANALYSIS OF LOW GOLD LEACHING RATE OF CALCINE OF A GOLD MINE Hu Yaoqin, Yu Qiang, Zhou Chuanhua and Li Guoxun 318
POTENTIAL ADJUSTMENT FLOTATION OF GALENA-LIME-DIETHYLDITHIOCARBAMATE SYSTEM Wang Dianzuo, Gu Guohua and Liu Ruyi 322
SYNTHESIS, CHARACTERIZATION AND CATALYTIC PERFORMANCE OF UNDECATUNGSTOZINCOALUMINIC HETEROPOLY ACID Wu Qingyin and Zhai Yuchun 327
PREPARATION OF CRYSTALLINE PRECIPITATION OF MIXED RARE EARTH CARBONATES Liu Song,Ma Rongjun 331
HIGHLY SENSITIVE IODOMETRIC AMPLIFICATION METHOD FOR SIMULTANEOUS DETERMINATION OF MICROGRAM AMOUNTS OF Mn AND Cr Zhang Minghao, Chen Bo and Zhang Quanru,Fang Zheng 335
GEOLOGY AND MINING ENGINEERING
TRAPPED MODES IN MULTILAYERED MEDIA INCLUDED A LOW-VELOCITY FORMATION Zhang Bixing, Yu Ming, Xiong Wei and Lan Congqing 340
TRIGONOMETRIC POLYNOMIAL FITTING METHOD FOR GYRO-ORIENTATION Liu Hongqi 347
A NEW METHOD FOR DETERMINING ELASTIC STRAIN ENERGY INDEX OF BURST ROCKS Feng Tao, Pan Changliang, Wang Hongtu, Cao Ping and Wang Wenxing 352
PROBABILITY ANALYSIS FOR FALLING OF KEY BLOCKS IN
BLOCK THEORY
Zhao Wen 356
MECHANO
MATHEMATICKAL MODEL FOR OPERATION OF A CENTRIFUGAL ATTRITOR Tang Guoning and Zhou Xian 360
COMPUTER-CONTROLLED ANTI-JAMMING TECHNOLOGY BY FEEDBACK OF FEED OIL PRESSURE IN ROCK-DRILLING PROCESS Hu Junping, Yang Xiangbi and Wu Wanrong 364

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn