Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第10卷    第z1期    1999年10月


铝、铜、镁对铸态锌基合金组织和阻尼性能的影响 张忠明     王锦程    徐东辉    宋广生     杨根仓    周尧和 1
锂硼合金的熔炼特性 章四琪    段  伟    刘志坚*    李志友*    曲选辉* 7
金属间化合物Al67Mn8Ti25合金解理能和解理面 文九巴     戎咏华    陈世朴    胡赓祥  陈家光 11
Cu-15Ni-8Sn 合金的机械合金化 曾跃武    郑史烈    吴进明    陈津文    李志章 15
铸造SiCp/Al-Si复合材料中的“界面Si”行为 隋贤栋    罗承萍    欧阳柳章    骆灼旋 19
含N,Nb,RE耐热钢的力学性能和高温特性 陈和兴    金展鹏 24
电磁搅拌作用对铝合金显微组织的影响 朱明原    史  文    杨森龙    任忠鸣    邵光杰    许珞萍 28
热挤压工艺参数对挤压铸造SiCw/L3复合材料组织和性能的影响 张文龙    王德尊    姜传海    丁冬雁    姚忠凯 34
激光超快速加热下冷轧Cu-30%Zn合金的再结晶织构 武保林1,2     王轶农1    胡广勇1    左  良1    梁志德1 40
制备工艺条件对泡沫镍抗拉强度的影响 刘培生    付  超  李铁藩 44
铝熔体中夹杂物与气体相互作用的关系 傅高升1,2     康积行1    陈文哲1    钱匡武1,2 50
HA-Ti/Ti/HA-Ti轴对称生物功能梯度材料的制备及其热应力缓和特性 储成林    朱景川    尹钟大    王世栋* 56
微弧氧化处理对TiAl合金抗氧化性能的影响 唐兆麟  王福会  吴维tao  P.S. Gordienko, S.V.Gnedenkov and V.S.Rudnev 62
Al-W二元系的机械合金化 欧阳义芳     钟夏平    吴伟明 68
喷射成型制备的Al-23Si-5Fe合金圆锭的凝固组织 张永安     熊柏青    韦  强    张少明    石力开刘  勇    王  峰 72
喷射成型过程中雾化粒滴的数值模拟 张永安     熊柏青    刘  江    张少明    石力开 刘  勇    王  峰 77
3D形状模型辅助喷射成形工艺的优化 张智慧    李  周    张国庆    米国发    刘仲武    田世藩 83
氩气雾化喷射成形的镍基高温合金 张国庆     米国发    李  周    刘仲武    张智慧     田世藩    赵先国 89
喷射成形的雾化气流速度 李  周    张智慧    张国庆    米国发    刘仲武    田世藩    颜鸣皋 95
氮气雾化喷射沉积变形镍基高温合金 刘仲武    米国发    田世藩    李  周    张智慧    张国庆 99
喷射成形Al-Pb合金的组织与性能 李晓学     刘  勇    孙继跃     崔  华    段先进     张济山 105
熔铸-原位反应喷射成形金属基复合材料制备新技术 杨  滨    段先进    刘  勇    胡双春    张济山 109
喷射成形复合轧辊的显微组织 孙德生     徐寒冰*    章靖国    吴建生* 113
Cu, Fe元素含量对喷射成形Al98-3xCu2xFexNi1Ce0.5Zr0.5合金
组织和性能的影响
沈  军    范洪波    曹福洋    崔成松    蒋祖龄    李庆春 118
喷射成形Al93.5Cu3Fe1.5Ni1Ce0.5Zr0.5合金的微观组织特征 范洪波  吴培莲   沈  军 曹福洋  李庆春  张国忠 124
喷射沉积Al-5.5Cu/TiB2自生复合材料的界面结构 张淑英    陈玉勇    沈光骏*    曹福洋    李庆春 130
喷射, 成形Cu-Cr-Zr-Mg合金的显微组织及性能 沈  军    李振宇     曹福洋    蒋祖龄    李庆春 135
喷射成形镍基高温合金的显微组织特征 孙剑飞     沈  军    贾  均    李庆春 141
高温合金喷射成形过喷粉末的凝固组织特征 孙剑飞     沈  军    贾  均    李庆春 147
快速凝固Al-Fe-Cu-V-Si-Ni-Ce-Zr合金的组织 董寅生1    沈  军1    杨英俊1    张海峰2   全明秀2    丁炳哲2  & 152
TiCp/W复合材料的断裂行为 周  玉    宋桂明    王玉金    雷廷权 157
Si3N4/Ti/Ni/Ti/Si3N4部分瞬间液相连接接头的强度与断裂 陈  铮  赵其章  吴  斌 许金泉 李志章 眭润舟 楼宏青
165
作用于中小尺寸板状熔体表面电磁压力的分析 沈  军    李建国     傅恒志  苏俊义 172
Fe含量对自蔓延高温合成TiC-Al2O3-Fe复合材料的影响 张卫方    韩杰才    陈贵清    赫晓东    杜善义 177
经皮元件用羟基磷灰石材料的组织相容性 王欣宇    陈晓明    闫玉华    李世普  余国荣    彭仁秀    黎七雄 183
气压对自蔓延高温还原合成B4C的影响 张化宇    韩杰才    王华彬    杜善义 189
机械合金化Al-V-Fe合金纳米晶粉末的制备及其微观结构 林锦新     庞  华    贾  威    曾梅光 194
筒形件反旋过程三维刚塑性有限元数值模拟 许  沂    单德彬    李  萍    吕  炎 198
离子镀TiN涂层的高温氧化特性 胡树兵1    梅  志2     李志章3    曾跃武3 203
金刚石锯片激光焊接接头的成分、组织和性能 夏锦华    殷  声叶宏煜    胡恩良
208
双级雾化过程的数值模拟 袁晓光    崔成松*    任露泉    李庆春* 213
连铸铜单晶工艺参数的匹配及其对铸棒表面质量和组织的影响 许振明     李金山*    李建国*   傅恒志* 220
工艺参数对静液挤压2024铝合金纳米晶组织性能的影响 胡连喜    李志民    王晓琳    王尔德 228
2618铝合金半固态压缩变形特性 刘  丹    崔建忠夏克农 233
金属粉末的模压致密化特性 孙雪坤    苗雨阳    王国栋 238
ErCoSn的X射线粉末衍射数据及Rietveld结构精化 吴世伟    张丽萍    曾令民    严嘉琳    何  维* 241
AlN/SiCw(Y2O3-SiO2)复合材料热处理增强机理 张宏泉     裴新美    李凝芳 245
Al-Li-Cu-Zr合金时效过程中形成的层错调制结构 卫英慧     胡兰青    陆  路    许并社    黄  源 250
金属间化合物的价电子结构空间分布模型 李  文 254
锂对工业纯铜的抗氧化性能的影响 朱达川     陈家钊    周秀丽    涂铭旌  张自明     胡兆敏
259
SiCp/Al合金基复合材料的室温拉伸性能 丁占来    樊云昌    齐海波    任德亮 264
半固态亚共晶铝硅合金非枝晶固相的形成与演变 邢书明     马  静    陈维视     李亚敏  胡汉起 269
冲杯制耳率计算公式质疑与重建 蒋显全    张秀锦    文  华 274
Cu-5Ni-4Sn-3Al合金的时效强化 邓忠民 277
CuZnAl合金摩擦过程中的扩散与相变 周晓霞    刘正义 282
具有巨磁热效应的GdSiGe系磁致冷新材料的介绍 陈云贵    陈远富    涂铭旌    唐定骧*    唐劲科# 289
矿用易磨损备件材料的研究 刘方云 张怀亮    任立军 294

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 10    Special 1    October 1999


EFFECT OF Al, Cu, Mg CONTENT ON MICROSTRUCTURE AND DAMPING CAPACITY OF ZINC BASED ALLOY Zhang Zhongming, Wang Jincheng, Xu Donghui, Song Guangsheng, Yang Gencang and Zhou Yaohe 1
MELTING CHARACTERISTICS OF Li-B ALLOYS
Zhang Siqi, Duan Wei, Liu Zhijian*, Li Zhiyou* and Qu Xuanhui* 7
CLEAVAGE ENERGIES AND CLEAVAGE FACETS IN AN INTERMETALLIC Al67Mn8Ti25 ALLOY Wen Jiuba, Rong Yonghua, Chen Shipu and Hu Gengxiang Chen Jiaguang 11
MECHANICAL ALLOYING OF Cu-15Ni-8Sn POWDER MIXTURE Zeng Yuewu, Zheng Shilie, Wu Jinming, Chen Jinwen and Li Zhizhang 15
"INTERFACIAL Si" BEHAVIOR IN CAST SiCp/Al-Si COMPOSITES Sui Xiandong, Luo Chengping, Ouyang Liuzhang and Luo Zhuoxuan 19
MECHANICAL PROPERTIES AND HIGH TEMPERATURE CHARACTERISTICS OF HEAT RESISTANT STEELS CONTAINING N, Nb AND RE Chen Hexing and Jin Zhanpeng 24
INFLUENCE OF EMS ON ALUMINUM ALLOY MICROSTRUCTURE Zhu Mingyuan, Shi Wen, Yang Senlong, Ren Zhongming, Shao Guangjie and Xu Luoping 28
EFFECTS OF HOT EXTRUSION PARAMETERS ON MICROSTRUCTURES AND TENSILE PROPERTIES OF SiCw/L3 COMPOSITES Zhang Wenlong, Wang Dezun, Jiang Chuanhai, Ding Dongyan and Yao Zhongkai 34
RECRYSTALLIZATION TEXTURE IN Cu-30%Zn ALLOY HEATED BY LASER BEAM Wu Baolin, Wang Yinong, Hu Guangyong, Zuo Liang, Liang Zhide 40
INFLUENCE OF TECHNOLOGY CONDITION ON TENSILE STRENGTH OF NICKEL FOAM Liu Peisheng, Fu Chao and Li Tiefan 44
INTERACTIVE MECHANISM BETWEEN INCLUSIONS AND HYDROGEN IN MOLTEN ALUMINUM Fu Gaosheng, Kang Jixing, Chen Wenzheand Qian Kuangwu 50
PREPARATION AND THERMAL STRESS RELAXATION CHARACTERISTICS OF HA-Ti/Ti/HA-Ti AXIAL SYMMETRICAL FUNCTIONALLY GRADED BIOMATERIAL Chu Chenglin, Zhu Jingchuan, Yin Zhongda and Wang Shidong* 56
EFFECT OF MICRO-ARC OXIDATION TREATMENT ON OXIDATION RESISTANCE OF TiAl ALLOY Tang Zhaolin, Wang Fuhui, Wu Weitao P.S. Gordienko, S. V. Gnedenkov and V. S. Rudnev 62
MECHANICAL ALLOYING OF Al-W BINARY SYSTEM Ouyang Yifang, Zhong Xiaping and Wu Weiming 68
SOLIDIFICATION MICROSTRUCTURE OF Al-23Si-5Fe BILLET IN SPRAY FORMING PROCESS Zhang Yongan, Xiong Baiqing, Zhang Shaoming and Shi Likai 72
COMPUTER SIMULATION OF DROPLETS IN FLIGHT STAGE DURING SPRAY FORMING PROCESS Zhang Yongan, Xiong Baiqing, Zhang Shaoming and Shi Likai 77
3D SHAPE MODEL AIDED SPRAY FORMING PROCESS Zhang Zhihui, Li Zhou, Zhang Guoqing, Mi Guofa, Liu Zhongwu and Tian Shifan 83
SPRAY FORMED NICKEL BASED SUPERALLOYS USING ARGON AS ATOMIZATION GAS Zhang Guoqing, Mi Guofa, Liu Zhongwu, Zhang Zhihui, Li Zhou, Tian Shifan and Zhao Xianguo 89
VELOCITY OF ATOMIZATION GAS DURING SPRAY FORMING Li Zhou, Zhang Zhihui, Zhang Guoqing, Mi Guofa, Liu Zhongwu, Tian Shifan and Yan Minggao 95
A NITROGEN SPRAY ATOMIZED AND DEPOSITED Ni-BASE SUPERALLOY Liu Zhongwu, Mi Guofa, Tian Shifan, Li Zhou, Zhang Zhihui and Zhang Guoqing 99
MICROSTRUCTURES AND PROPERTIES OF SPRAY FORMED Al-Pb ALLOYS Li Xiaoxue, Liu Yong, Sun Jiyue, Cui Hua, Duan Xianjing and Zhang Jishan 105
A NEW TECHNIQUE OF MELT IN-SITU REACTION SPRAY FORMING METAL MATRIX COMPOSITES Yang Bin, Duan Xianjing, Liu Yong, Hu Shuangchun and Zhang Jishan 109
MICROSTRUCTURE OF A CLAD ROLL PREPARED BY SPRAY FORMING Sun Desheng, Xu Hanbing*, Zhang Jingguo and Wu Jiansheng* 113
INFLUENCE OF CONTENT OF Cu AND Fe ON MICROSTRUCTURES AND MECHANICAL PROPERTIES OF SPRAY FORMED Al98-3xCu2xFexNi1Ce0.5Z Shen Jun, Fan Hongbo, Cao Fuyang, Cui Chengsong, Jiang Zuling and Li Qingchun 118
CHARACTERISTIC MICROSTRUCTURES OF SPRAY FORMED Al93.5Cu3Fe1.5Ni1Ce0.5Zr0.5 ALLOY Fan Hongbo, Wu Peilian, Shen Jun, Cao Fuyang and Li Qingchun Zhang Guozhong 124
INTERFACE STRUCTURE OF Al-5.5Cu/TiB2 IN-SITU COMPOSITES FABRICATED BY SPRAY DEPOSITION Zhang Shuying, Chen Yuyong, Shen Guangjun*, Cao Fuyang and Li Qingchun 130
MICROSTRUCTURE AND PROPERTIES OF Cu-Cr-Zr-Mg ALLOY PREPARED BY SPRAY FORMING Shen Jun, Li Zhenyu, Cao Fuyang, Jiang Zuling and Li Qingchun 135
MICROSTRUCTURAL CHARACTERISTICS OF A NICKEL-BASED SUPERALLOY PRODUCED BY SPRAY FORMING Sun Jianfei, Shen Jun, Jia Jun and Li Qingchun 141
MICROSTRUCTURE CHARACTERISTICS OF OVER-SPRAYED SUPERALLOY POWDER Sun Jianfei, Shen Jun, Jia Jun and Li Qingchun 147
MICROSTRUCTURE OF RAPIDLY SOLIDIFIED Al-Fe-Cu-V-Si-Ni-Ce-Zr ALLOY
Dong Yinsheng, Shen Jun, Yang Yingjun, Zhang Haifeng, Quan Mingxiu, Ding Bingzhe and Li Qingchun 152
FRACTURE BEHAVIOR OF TiCp/W COMPOSITES Zhou Yu, Song Guiming, Wang Yujin and Lei Tingquan 157
JOINT STRENGTH AND FRACTURE IN Si3N4/Ti/Ni/Ti/SSi3N4 PARTIAL TRANSIENT LIQUID-PHASE BONDING Chen Zheng, Zhao Qizhang and Wu Bin Xu Jinquan and Li Zhizhang Sui Runzhou and Lou Hongqing 165
ANALYSIS FOR ELECTROMAGNETIC PRESSURE ON THIN PLATELIKE MELT Shen Jun, Li Jianguo and Fu Hengzhi Su Junyi 172
INFLUENCE OF Fe CONTENT ON TiC-Al2O3-Fe COMPOSITES SYNTHESIZED BY SHS/PHIP Zhang Weifang, Han Jiecai, Chen Guiqing, He Xiaodong and Du Shanyi 177
HISTOCOMPATIBILITY OF HYDROXYAPATITE FOR PERCUTANEOUS DEVICE Wang Xinyu, Chen Xiaoming, Yan Yuhua, Li Shipu Yu Guorong, Peng Renxiu , Li Qixiong 183
INFLUENCE OF PRESSURE ON B4C PRODUCED BY SHS Zhang Huayu, Han Jiecai, Wang Huabin and Du Shanyi 189
PREPARATION AND MICROSTRUCTURE OF Al-V-Fe ALLOY BY MECHANICALLY ALLOYING Lin Jinxin, Pang Hua, Jia Wei and Zeng Meiguang 194
NUMERICAL SIMULATION ON BACKWARD TUBE SPINNING Xu Yi, Shan Debin, Li Ping and Lu Yan 198
OXIDATION PROPERTIES OF TiN COATING BY ION PLATING AT HIGH TEMPERATURE Hu Shubing, Mei Zhi, Li Zhizhang and Zeng Yuewu 203
COMPOSITION, MICROSTRUCTURE AND PROPERTIES OF WELDED JOINT OF DIAMOND SAW BLADE BY LASER WELDING Xia Jinhua and Yin Sheng ,Ye Hongyu , Hu Enliang 208
COMPUTER SIMULATION OF DROPLETS DURING TWO-STAGE ATOMIZATION PROCESS Yuan Xiaoguang, Ren Luquan, Cui Chengsong* and Li Qingchun* 213
MATCHING OF TECHNOLOGICAL PARAMETERS AND ITS EFFECT ON SURFACE QUALITY AND CAST STRUCTURE OF COPPER SINGLE CRYSTAL ROD DURING CONTINUOUS CASTING Xu Zhenming, Li Jinshan, Li Jianguo , Fu Hengzhi 220
INFLUENCE OF TECHNICAL PARAMETERS ON MICROSTRUCTURE AND PROPERTIES OF NANOCRYSTALLINE 2024 ALUMINIUM ALLOY CONSOLIDATED BY HYDROSTATIC EXTRUSION Hu Lianxi, Li Zhimin, Wang Xiaolin and Wang Erde 228
COMPRESSION BEHAVIOR OF 2618 ALUMINUM ALLOY IN SEMI-SOLID STATE Liu Dan ,Cui Jianzhong Xia Kenong 233
DIE COMPACTION DENSIFICATION BEHAVIOR OF METAL POWDERS Sun Xuekun, Miao Yuyang and Wang Guodong 238
X-RAY POWDER DIFFRACTION DATA AND RIETVELD REFINEMENT FOR RARE EARTH COMPOUND ErCoSn Wu Shiwei, Zhang Liping, Zeng Lingmin, Yan Jialin and He Wei* 241
MECHANISM OF HEAT-TREATMENT REINFORCEMENT OF AlN/SiCw(Y2O3-SiO2) COMPOSITES Zhang Hongquan, Pei Xinmei and Li Ningfang 245
A STACKING FAULT MODULATED STRUCTURE FORMED IN Al-Li-Cu-Zr ALLOY CONTAINING Ce Wei Yinghui, Hu Lanqing, Lu Lu, Xu Bingshe and Huang Yuan 250
SPACE TOPOLOGY MODEL OF VALENCE ELECTRON STRUCTURE IN INTERMETALLICS Li Wen 254
EFFECT OF LITHIUM ON PURE COPPER'S ANTI-OXIDIZABILITY Zhu Dachuan, Chen Jiazhao, Zhou Xiuli , Tu Mingjing Zhang Ziming , Hu Zhaomin 259
TENSILE PROPERTIES OF SiCp/Al ALLOY COMPOSITES Ding Zhanlai, Fan Yunchang, Qi Haibo and Ren Deliang 264
FORMATION AND EVOLUTION OF NONDENDRITIC SOLID PHASE OF SEMISOLID Al-Si ALLOY Xing Shuming, Ma Jing, Chen Weishi, Li Yamin and Hu Hanqi* 269
QUERY AND RE-ESTABLISHMENT OF CALCULATION FORMULA FOR CUPPING EARING RATIO Jiang Xianquan, Zhang Xiujing and Wen Hua 274
AGING STRENGTHENING OF Cu-5Ni-4Sn-3Al ALLOY Deng Zhongmin 277
DIFFUSION AND PHASE TRANSFORMATION OF CuZnAl ALLOY DURING FRICTION Zhou Xiaoxia and Liu Zhengyi 282
INTRODUCTION OF GdSiGe ALLOY WITH GIANT MAGNETOCALORIC EFFECT Chen Yungui, Chen Yuanfu, Tu Mingjing, Tang Dingxiang and Tang Jinke 289
QUICK-WEAR ABRASION SPARE-PARTS AND MATERIALS Liu Fangyun, Zhang Huailiang* and Ren Lijun* 294

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn