Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第11卷    第1期    2001年2月


材料科学与工程
α2板条在TiAl合金全层状组织形变和断裂中的作用 陆永浩1,2,张永刚2, 乔利杰1,王燕斌1, 陈昌麒2,褚武扬1 1
快速凝固高硅铝合金粉末的热挤压过程 张大童, 李元元, 罗宗强, 邱 诚 6
拟流函数法分析铝板铸轧过程的流动状态 崔小朝, 王宥宏, 刘 才2,史 荣2 10
铝材连续铸挤动态凝固过程有限元分析 陈彦博, 温景林 15
混合润滑轧制入口膜厚模型 孙建林, 康永林, 张新明 18
铝电磁铸轧中熔体的频率响应 赵啸林, 毛大恒, 李晓谦, 贺地求 22
整体翅片管的劈切-挤压加工 夏 伟, 吴 斌, 汤 勇, 李元元 27
多晶铜形变显微组织及其再结晶行为 黄晓旭, 蔡大勇, 姚 枚, 刘 庆, N. Hansen 31
TiCp对Zn-10Al合金凝固行为的影响 王 香, 曾松岩, 张二林, 王丽萍 36
Al-ZrOCl2反应体系制备ZrAl3(p)+Al2O3(p)/Al复合材料 赵玉涛1,2,孙国雄1 41
预变形及液固两相区等温处理对ZA27合金铸态组织的影响 谢 辉, 许丽君,袁中岳, 郑红星, 郭学锋 47
铁含量对Al-Si-Fe合金微观组织及内耗性能的影响 罗兵辉, 谢佑卿 51
Ti/Al二元粉末的机械合金化 李小强, 胡连喜, 王尔德 55
AlON的合成工艺 王习东1,2,李文超1 59
离心加速条件下金属液中粒子的相互作用 于思荣, 任露泉, 庞宇平 63
深过冷条件下Cu-Co合金的液相分解 孙占波, 宋晓平, 胡柱东, 杨 森,曹崇德, 魏炳波 68
高温淬火Co72.7C11.8Si15.5磁性合金的结构和相转变 顾正飞, 刘正义, 曾德长, 钟喜春, 魏兴钊, 罗承萍 74
Ti-Mn基储氢合金电化学容量的一个简易模型 张 勇, 郭生武, 柳永宁 79
熔体旋淬Ml(NiCoMnAl)5贮氢合金的微结构与电化学行为 文明芬1,2,佟 敏1, 陈 廉1,吴 锋3, 陈德敏1
单忠强3, 马荣骏4,翟玉春2
84
稀土Eu掺杂对金属氧化物涂层阳极电催化性能的影响 邹 忠, 李 劼, 丁凤其, 张文根2, 肖 劲, 叶绍龙, 刘业翔 91
Zn-Mn和Zn-Ti二元合金热力学性质 路贵民, 乐启炽, 崔建忠 95
热电池阳极材料Li-B合金的密度分析 刘志坚, 曲选辉, 李志友, 黄伯云 99
Ag-Cu-Ti钎料中Ti元素在金刚石界面的特征 孙凤莲1, 冯吉才1, 刘会杰1, 邱平善2, 李 丹2 103
模拟体液中纯钛及Ti6Al4V合金的腐蚀行为 郭 亮, 梁成浩, 隋洪艳 107
炉熔处理对等离子喷涂Ni基WC型自熔合金涂层组织形态的影响 向兴华, 刘正义, 陈康年, 李尚周 111
WC-8.0%Co基底上微波等离子化学气相沉积金刚石膜 刘 泉, 周 健, 余卫华, 刘桂珍 116
电子封装功率模块PbSnAg焊层热循环可靠性 张胜红, 王国忠, 程兆年 120
选矿·冶金·化学
一水硬铝石型铝土矿铝硅浮选分离的溶液化学 胡岳华, 蒋 昊, 邱冠周, 王淀佐 125
H2SO4分解富钛精矿的反应动力学 王明华, 都兴红, 隋智通 131
苯并三氮唑与4-羧基苯并三氮唑在氯化钠溶液中对铜的缓蚀作用 徐群杰, 周国定, 陆 柱, 刘峰名,田中群, 林昌健 135
金属-橡胶粘合促进剂硼酰化镍的制备及性能 李晓如, 吴海鹰, 成本诚 140
硫铁矿烧渣的熟化及机理 郑雅杰, 陈白珍, 龚竹青, 陈文汨 144
钛离子对低铬钝化膜的改性 卢燕平, 屈祖玉 148
采矿·机电工程
大直径深孔凿岩钻孔偏斜的机理及其控制方案 吴万荣1, 魏建华1, 张永顺1, 杨襄璧2 153
空场采矿法采场顶板破坏模式识别专家系统 刁心宏, 冯夏庭, 于培言, 蔡鸿起 157
最小方差预测法预测岩土工程变形 王国辉, 马 莉, 杨腾峰, 侯永会, 李卫国 162

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 11    No. 1    February 2001


MATERIALS SCIENCE AND ENGINEERING
Effect of α2 plates on deformation and fracture of
fully lamellar TiAl alloys
LU Yong-hao, ZHANG Yong-gang, QIAO Li-jie, WANG Yan-bing, CHEN Chang-qi, CHU Wu-yang 1
Hot extrusion process of rapidly solidified hypereutectic

aluminumsilicon alloy powder

ZHANG Da-tong, LI Yuan-yuan, LUO Zong-qiang, QIU Cheng 6
Analysis of flowing state of aluminum plate in castrolling process with imitative flow function CUI Xiao-chao, WANG You-hong, LIU Cai, SHI Rong 10
FEM analysis of solidification process in producing
aluminum product through CASTEX technique
CHEN Yan-bo, WEN Jing-lin 15
Model for inlet film thickness in mixed-lubrication rolling SUN Jian-lin, KANG Yong-lin, ZHANG Xin-ming 18
Frequency response of melt in aluminum
electromagnetically continuous cast-rolling process
ZHAO Xiao-lin, MAO Da-heng, LI Xiao-qian, HE Di-qiu 22
Chopping-extrusion technique for
making integral-fin tubes
XIA Wei, WU Bin, TANG Yong, LI Yuanyuan 27
Deformation structure and recrystallization behaviour
of tensile strained copper
HUANG Xiao-xu, CAI Da-yong, YAO Mei, LIU Qing, N. Hansen 31
Influence of TiCp on solidification behavior
of Zn-10Al alloy
WANG Xiang, ZENG Song-yan, ZHANG Er-lin,WANG Li-ping 36
ZrAl3(p)+Al2O3(p)/Al composites fabricated by
reaction in system Al-ZrOCl2
ZHAO Yu-tao, SUN Guo-xiong 41
Effects of pre-deforming and isothermal treatment on structural granular transformation of as-cast ZA27 alloy XIE Hui, XU Li-jun, YUAN Zhong-yue, ZHENG Hong-xing, GUO Xue-feng 47
Effect of iron content on microstructure and
internal friction of Al-Fe-Si alloy
LUO Bing-hui, XIE You-qing 51
Mechanical alloying of Ti/Al binary powders LI Xiao-qiang, HU Lian-xi, WANG Er-de 55
Synthesis technology of AlON WANG Xi-dong, LI Wen-chao 59
Interaction of particles in metal melt in centrifugal field YU Si-rong, REN Lu-quan, PANG Yu-ping 63
Liquid separating behavior of Cu-Co alloys
under deep supercooling
SUN Zhan-bo, SONG Xiao-ping, HU Zhu-dong, YANG Sen,CAO Chong-de, WEI Bing-bo 68
Structure and phase transformation for Co72.7C11.8Si15.5 magnetic alloy quenched at high temperature GU Zheng-fei, LIU Zheng-yi, ZENG De-chang, ZHONG Xi-chun, WEI Xing-zhao, LUO Cheng-ping 74
A simple model for discharge capacity
of Ti-Mn based alloys
ZHANG Yong, GUO Sheng-wu, LIU Yong-ning 79
Microstructure and electrochemical behaviors of
melt-spinning alloy Ml(NiCoMnAl)5
WEN Ming-fen, TONG Min, CHEN Lian, WU Feng, CHEN De-min,SHAN Zhong-qiang, MA Rong-jun 84
Effect of doping with rare earth Eu on
electrocatalysis of metal oxide anode coating
ZOU Zhong, LI Jie, DING Feng-qi, ZHANG Wen-gen,XIAO Jing, YE Shao-long, LIU Ye-xiang 91
Thermodynamic properties of binary alloys
of Zn-Mn and Zn-Ti
LU Gui-min, LE Qi-chi, CUI Jian-zhong 95
Density of Li-B alloy used for anode materials
of thermal battery
LIU Zhi-jian, QU Xuan-hui, LI Zhi-you, HUANG Bai-yun 99
Characteristic of Ti in Ag-Cu-Ti filler in
brazed joint of diamond
SUN Feng-lian, FENG Ji-cai, LIU Hui-jie, QIU Ping-shan, LI Dan 103
Corrosion behavior of commercially pure Ti and
Ti6Al4V alloy in artificial body fluid
GUO Liang, LIANG Cheng-hao, SUI Hong-yan 107
Influence of remelting in furnace on microstructure of plasma sprayed WC+Ni base self-fluxing alloy coating XIANG Xing-hua, LIU Zheng-yi, CHEN Kang-nian, LI Shang-zhou 111
Technology of microwave plasma chemical vapor
deposition diamond coating upon WC-Co tools
LIU Quan, ZHOU Jian, YU Wei-hua, LIU Gui-zhen 116
Reliability of PbSnAg solder layer of power modules under thermal cycling in electronic packaging ZHANG Sheng-hong, WANG Guo-zhong, CHENG Zhao-nian 120
MINERAL PROCESSING, METALLURGY AN
Solution chemistry of flotation separation
of diasporic bauxite
HU Yue-hua, JIANG Hao, QIU Guan-zhou, WANG Dian-zuo 125
Kinetics of acidolysis of rich titanium concentrate
by H2SO4
WANG Ming-hua, DU Xing-hong, SUI Zhi-tong 131
Corrosion inhibition of BTA and its derivative 4CBTA on
copper electrode in 3% NaCl solution
XU Qun-jie,ZHOU Guo-ding,LU Zhu,LIU Feng-ming,TIAN Zhong-qun,LIN Chang-jian 135
Preparation and properties of nickel borate acylate LI Xiao-ru, WU Hai-ying, CHENG Ben-cheng 140
Maturation of pyrite cinders and its mechanism ZHENG Ya-jie, CHEN Bai-zhen, GONG Zhu-qing, CHEN Wen-mi 144
Low-chromate passive film modified with Ti(Ⅳ) ions LU Yan-ping, QU Zu-yu 148
MINING AND ELECTROMECHANICAL ENGINE
Drilling axial deviation mechanism and its control program for large-diameter blasthole rock-drilling WU Wan-rong, WEI Jian-hua, ZHANG Yong-shun, YANG Xiang-bi 153
Expert system in identifying failure mode of
hanging wall of room-and-pillar mining
DIAO Xin-hong, FENG Xia-ting, YU Pei-yan, CAI Hong-qi 157
Forecasting geotechnical engineering distortion with
least square error forecasting method
WANG Guo-hui, MA Li, YANG Teng-feng, HOU Yong-hui, LI Wei-guo 162

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn