Structural Materials |
Cavity evolution behavior of twin-roll-cast AZ31 alloy sheet during
hot deformation |
LU Zhi-wen, PENG Wei-ping, LI Pei-jie, LEI Li-ping |
785 |
Hot deformation behavior of Mg-Zn-Gd-Y base alloys with
different contents of quasicrystal |
ZHANG Jian, ZHANG Xin-ping, YUAN Guang-yin, ZHANG Song, DING Wen-jiang |
793 |
Effect of anisotropy on incremental forming of magnesium alloy sheet and its microstructure evolution |
ZHANG Qing-lai, XIAO Fu-gui, GUO Hai-ling, GAO Lin, A.B. Bondarev, HAN Wei-dong |
800 |
Effect of thermal exposure on tensile properties of
underaged Al-Cu-Mg-Ag alloy |
XIA Qing-kun, LIU Zhi-yi, LI Yun-tao, MA Fei-yue, BAI Song |
808 |
Deformation microstructure of AZ31B magnesium alloy under
high strain rate compression |
MAO Ping-li, LIU Zheng, WANG Chang-yi, JING Xin, WANG Feng, GUO Quan-ying, SUN Jing |
816 |
Influence of process technology on mechanical and
damping properties of ZK60 magnesium alloys |
WANG Jing-feng, GAO Shan, PAN Fu-sheng, TANG Ai-tao, DING Pei-dao |
821 |
Microstructure and high temperature mechanical properties of Mg-5Al-0.8Ca-0.2La-xSr alloy |
WANG She-bin, LI Xiao-bin, FAN Jing-ping, WANG Shuai, XU Bing-she |
826 |
Microstructures and mechanical properties of
high-pressure die-cast Mg-4Al-0.4Mn-xPr alloys |
YU Peng, ZHANG Jing-huai, TANGDing-xiang, LIUKe, MENG Jian, ZHOU De-feng |
833 |
Microstructure of SiC nanoparticles reinforced AZ61 magnesium composites fabricated by ultrasonic method |
HU Zhi, YAN Hong, NIE Qiao, LING Li-shi-bao |
841 |
Effect of Er on microstructure and corrosion resistance of
AZ91 magnesium alloy |
LIU Chu-ming, GE Wei-wei, LI Hui-zhong, CHEN Zhi-yong, WANG Rong, GAO Yan-rui |
847 |
Influence of acid pickling on electrodeposition of aluminum on magnesium alloy in room temperature molten salts |
QIAN Hong-mei, LI Yan, LING Guo-ping |
854 |
TTP curve of aluminum alloy 7050 |
ZHANG Xin-ming, LIU Wen-jun, LIU Sheng-dan, YUAN Yu-bao, DENG Yun-lai |
861 |
Preparation of semi-solid feedstock by serpentine pipe pouring |
YANG Xiao-rong, MAO Wei-min, GAO Chong |
869 |
Dissolution behavior of second phases in Al-Cu binary alloy during severe plastic deformation |
PENG Bei-shan, NING Ai-lin, LIU Zhi-yi, XU Xiao-chang, JIANG Shou-sheng, ZENG Su-min |
874 |
Equal channel angular pressing of pure Al powder sintered material |
LI Ping, HUANG Ke-shuai, XUE Ke-min, ZHOU Ming-zhi, HAN Guo-min |
881 |
Functional Materials |
Crystallization kinetics and microstructures of NaF-CaF2-Al2O3-SiO2 glass-ceramics |
CHEN Yuan-yuan, LU An-xian |
887 |
Effect of Na doping on structure and magnetic entropy of
perovskite La0.7Sr0.3−xNaxMnO3 doped with Na+ |
QI Shu-yan, MA Cheng-guo, DONG Li-min, HAN Zhi-dong, ZHANG Xian-you |
894 |
Fabrication and mechanical properties of
porous Zr-based bulk metallic glass |
QIU Ke-qiang, ZHAO Yu-hang, REN Ying-lei, ZHANG Shi-cheng, ZHANG Tao |
900 |
Electrochemical properties of TiO2 nanotube arrays prepared by
anodic oxidation on titanium substrate |
TIAN Xi-lin, TAO Jie, TAO Hai-jun, BAO Zu-guo, TANG Yu-xin |
904 |
Preparation of S and metal co-doped TiO2 and
their photocatalytic activities |
GU Ling-yan, WANG Yu-ping, PENG Pan-ying, WANG Lian-jun |
910 |
Ultrasonic wire bonding between Au contact electrode of
CdZnTe wafer and down-lead wire |
NIE Zhong-ming, FU Li, REN Jie, ZHA Gang-qiang |
919 |
Giant magnetoresistance of CuCo granular films electrodeposited in magnetic field |
ZHAO Lin, FAN Zhan-guo, YANG Zhong-dong, GAO Peng, QIN Gao-wu |
924 |
Interfacial reaction and its kinetics of electroplated Ag/Sn couples |
TANG Wen-ming, HE An-qiang, LIU Qi, IVEY G D |
930 |
Mine Engine |
Enrichment and resources potential of titanium in cobalt-rich crust |
CUI Ying-chun, LIU Ji-hua, LIN Xue-hui, SHI Xue-fa |
936 |
Mineral decomposition process of vanadium recovery from
stone coal by low temperature sulphating roasting |
LIU Wan-li, WANG Xue-wen, WANG Ming-yu, HU Jian, ZHANG Li-ping |
943 |
Pre-desilication of laterite in NaOH sub-molten salt system |
ZHAO Chang-ming, ZHAI Yu-chun, LIU Yan, DUAN Hua-mei |
949 |
Activity calculation model for slag system of CaO-Cu2O-Fe2O3 |
WANG Jin-liang, ZHANG Chuan-fu, ZHANG Wen-hai |
955 |
Influence of ultrasonic irradiation on ammonia leaching of
zinc from low-grade oxide zinc ore |
ZHANG Yu-mei, LI Jie, CHEN Qi-yuan, DING Hong-qing |
960 |
Effect of protrusion length of melt delivery tube on gas flow field for supersonic gas atomization |
ZHAO Xin-ming, XU Jun, ZHU Xue-xin, ZHANG Shao-ming |
967 |
Corrosion behavior of 7A04 aluminum alloy
deposited with sodium chloride in simulated environment |
ZHOU He-rong, MA Jian, LI Xiao-gang, LU Qi-kai, FENG Hao, JIE Gan-xin |
974 |