Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第15卷    第8期    2005年8月


铸态及快淬态无钴AB5型贮氢合金的循环稳定性 张羊换1, 2, 王国清1, 董小平2, 郭世海1, 任江远2, 王新林1 1155
变压边力条件下铝合金板的成形窗口 林忠钦, 于忠奇, 孙成智, 陈关龙 1162
热变形温度对TC18钛合金显微组织和力学性能的影响 沙爱学, 李兴无, 王庆如, 鲍如强 1167
冷轧高纯铝柱状晶粒的组织与微取向的不均匀性 邓运来, 张新明, 刘 瑛, 唐建国, 周卓平 1173
二元共晶比例法制备铜基大块非晶合金 杨英俊1, 2, 孙剑飞1, 李永泽2, 孙继库2, 沈 军1 1179
原位合成TiB2/ZL109复合材料的热处理特性 易宏展, 马乃恒, 李险峰, 张亦杰, 王浩伟 1184
高锆Si-Al-Zr-O系非晶晶化过程 梁叔全, 李少强, 谭小平, 唐 艳, 张 勇 1189
双相结构功能梯度WC-Co合金的
微观组织结构与小负荷维氏硬度
张 立1, 陈 述2, 熊湘君1, 黄伯云1, 张传福3 1194
铝合金铸件充型过程及氧化膜卷入的数值模拟 赵海东1, I. Ohnaka2 1200
C/C坯体对RMI C/C-SiC复合材料组织的影响 冉丽萍1, 易茂中1, 陈 斌2 1208
磁控溅射制备In2O3-SnO2薄膜与分析 李世涛, 乔学亮, 陈建国 1214
Zr基非晶合金在过冷液相区的
高应变速率压缩变形行为
张曙光, 胡 捷, 朱学新, 石力开, 王发东 1219
冷却速度对Al-8.5Fe-1.3V-1.7Si合金
主要相组成的影响
谭敦强1, 2,唐建成1, 黎文献2,肖于德2, 王日初2,陈 伟3 1226
球磨改性处理对Ti46V44Fe10合金相结构和
吸放氢性能的影响
陈立新, 郑坊平, 刘 剑, 葛红卫, 陈长聘 1231
TiO2/O′-Sialon界面反应过程 刘 欣, 薛向欣, 杨 建, 段培宁 1236
超薄快速铸轧轧制压力分布计算 熊勇刚1, 2, 谭建平2, 李小东1, 2 1243
渗流法制备高孔隙率多孔铝 张伟开, 李乃哲, 何德坪 1248
速度等高线法优化喷射成形棒坯的形状控制参数 霍 光1, 2, 邓德国2, 谢 明2, 郑福前2 1253
铝液充型过程水模拟计算机可视化技术 赵忠兴1,2,王松涛2, 闻绍玲2,翟玉春1 1262
纳米晶La1-xSrxMnO3的溶胶-凝胶法合成及表征 尹荔松1, 2, 樊志良1, 王 达1, 张进修2 1267
湿化学法合成YAG纳米粉体及透明陶瓷 闻 雷1, 孙旭东2, 其 鲁1, 马伟民3 1272
含氟三氯化锑溶液中和水解产物的物相 郑国渠, 黄荣斌, 潘 勇, 郑遗凡 1278
重金属强化含金矿石的氰化浸出 杨永斌, 李 骞, 姜 涛, 金勇士 1283
石灰中和-生物净化处理含铍废水 闵小波1, 柴立元1, 庄明龙1, 王云燕1, 彭兵1, 何德文1, 李诚星2 1289
新型锂离子电池正极材料Li3V2(PO4)3
合成及其性能
刘素琴, 唐联兴, 黄可龙, 张 静 1294
Li1.05Ni0.05Mn1.9O4正极材料脱锂过程中的结构变化 师绍纯, 曹高劭, 涂 健, 赵新兵, 涂江平 1300
二烷基二硫代磷酸锌润滑添加剂的抗磨机理 文小红, 王学业, 刘万强, 谭援强 1305
硫化锑精矿还原造锍熔炼一步炼锑 陈永明, 黄 潮, 唐谟堂, 姚维义, 唐朝波, 皮关华 1311

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 15    No. 8    August 2005


Cycle stability of Co-free AB5-type hydrogen
storage alloy prepared by casting and
rapid quenching
ZHANG Yang-huan, WANG Guo-qing, DONG Xiao-ping,GUO Shi-hai, REN Jiang-yuan, WANG Xin-lin 1155
Formability window of aluminium alloy sheet
at variable blank-holder force
LIN Zhong-qin, YU Zhong-qi, SUN Cheng-zhi, CHEN Guan-long 1162
Influence of hot deformation temperature on microstructure and mechanical properties of TC18 alloy SHA Ai-xue, LI Xing-wu, WANG Qing-ru, PAO Ru-qiang 1167
Inhomogeneities of microstructures and micro-orientations in cold-rolled high purity
Al columnar grains
DENG Yun-lai, ZHANG Xin-ming, LIU Ying, TANG Jian-guo,ZHOU Zhuo-ping 1173
Fabrication of Cu-based bulk metallic glasses
by binary deep eutectic method
YANG Ying-jun, SUN Jian-fei, LI Yong-ze, SUN Ji-ku, SHEN Jun 1179
Heat treating behaviors of in-situ TiB2/ZL109 composites YI Hong-zhan, MA Nai-heng, LI Xian-feng, ZHANG Yi-jie,WANG Hao-wei 1184
Crystallization behavior of Si-Al-Zr-O amorphous bulk with higher zirconium LIANG Shu-quan, LI Shao-qiang, TAN Xiao-ping,TANG Yan, ZHANG Yong 1189
Microstructure and Vickers hardness of functionally graded WC-Co cemented carbide with dual phase structure ZHANG Li, CHEN Shu, XIONG Xiang-jun, HUANG Bai-yun,ZHANG Chuan-fu 1194
Numerical simulation of oxide entrapment and
mold filling process of Al casting
ZHAO Hai-dong, I. Ohnaka 1200
Influence of different C/C performs on microstructure of C/C-SiC composites fabricated by RMI RAN Li-ping, YI Mao-zhong, CHEN Bin 1208
Preparation and analysis of In2O3-SnO2
thin films deposited by magnetic sputtering
LI Shi-tao, QIAO Xue-liang, CHEN Jian-guo 1214
High strain rate compressive deformation behavior of Zr-based bulk amorphous alloy in supercooled liquid region ZHANG Shu-guang, HU Jie, ZHU Xue-xin, SHI Li-kai, WANG Fa-dong 1219
Effect of cooling rate on primary phase constitutes of Al-8.5Fe-1.3V-1.7Si alloy AN Dun-qiang, TANG Jian-cheng, LI Wen-xian, XIAO Yu-de,WANG Ri-chu, CHEN Wei 1226
Influence of ball-milling on phase structure and 
hydriding/dehydriding behaviour of
Ti46V44Fe10 alloy
CHEN Li-xin, ZHENG Fang-ping, LIU Jian, GE Hong-wei, CHEN Chang-pin 1231
Reactive process in interface between
TiO2 and O′-Sialon
LIU Xin, XUE Xiang-xin, YANG Jian, DUAN Pei-ning 1236
Calculation of rolling-force distribution of
thin gauge roll-casting
LIN Chen-guang, YUAN Guan-sen 1243
Preparation of porous Al with high porosity
by infiltration method
ZHANG Wei-kai, LI Nai-zhe, HE De-ping 1248
Optimization of spray-forming rod condition
by contour line
HUO Guang, DENG De-guo, XIE Ming, ZHENG Fu-qian 1253
Computer video technology of water simulation for aluminum liquid filling process ZHAO Zhong-xing, WANG Song-tao, WEN Shao-ling,ZHAI Yu-chun 1262
Preparation and characteristics of nanocrystalline La1-xSrxMnO3 derived by sol-gel process YIN Li-song, FAN Zhi-liang, WANG Da, ZHANG Jin-xiu 1267
Nanocrystalline YAG powders and translucent ceramics by wet-chemical method WEN Lei, SUN Xu-dong, QI Lu, MA Wei-min 1272
Phases of antimony trichloride solution containing fluorine neutralization-hydrolysis products ZHENG Guo-qu, HUANG Rong-bin, PAN Yong, ZHENG Yi-fan 1278
Cyanide leaching of gold ores by
heavy metal ions
YANG Yong-bin, LI Qian, JIANGg Tao, JIN Yong-shi 1283
Treatment of beryllium-containing wastewater by lime-neutralization and biosorption technique MIN Xiao-bo, CHAI Li-yuan, ZHUANG Ming-long, WANG Yun-yan,PENG Bing, HE De-wen, LI Cheng-xing 1289
Synthesis and electrochemical characteristics of 
cathode materials Li3V2(PO4)3 for
lithium-ion batteries
LIU Su-qin, TANG Lian-xing, HUANG Ke-long, ZHANG Jing 1294
Structure change of Li1.05Ni0.05Mn1.9O4
cathode material during Li extraction
SHI Shao-chun, CAO Gao-shao, TU Jian, ZHAO Xin-bing,TU Jiang-ping 1300
Anti-wear property of zinc
dialkyldithiophosphate
WEN Xiao-hong, WANG Xue-ye, LIU Wan-qiang, TAN Yuan-qiang 1305
Production of antimony by directly reducing-matting smelting
of stibnite concentrate
CHEN Yong-ming, HUANG Chao, TANG Mo-tang, YAO Wei-yi,TANG Chao-bo, PI Guan-hua 1311

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn