Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

Transactions of Nonferrous Metals Society of China

中国有色金属学报(英文版)

Vol. 22    No. 2    December 2012


New Forming Technology
Optimization of cold forging perform tools using Pseudo Inverse Approach Ali HALOUANI, Yu-ming LI, ABBES Boussad, Ying-qiao GUO 207
Machine and tool development for forming of polymeric tubular micro-components Jie ZHAO, Arthur Lan Kuan YIP, Yi QIN, Akhtar RAZALI, Zhi-cong FEI 214
Prediction of texture evolution under varying deformation states through crystal plasticity finite element method LI Hong-wei, YANG He 222
A new approach to investigate real flow stress in micro-extrusion LIN Jun-feng, LI Feng, ZHANG Jin-feng 232
Critical blank-holder force in axisymmetric deep drawing QIN Si-ji, XIONG Bai-qing, LU Hong, ZHANG Ting-ting 239
FE analysis for radial spread behavior in three-roll cross rolling with small-hole and deep-groove ring QIAN Dong-sheng, HUA Lin, DENG Jia-dong 247
Development of thermal deep drawing system with vacuum environment for difficult-to-deformation materials MENG Bao, WAN Min, WU Xiang-dong, ZHOU Ying-ke 254
Residual stress field induced by shot peening based on random-shots for 7075 aluminum alloy SHENG Xiang-fei, XIA Qin-xiang, CHENG Xiu-quan, LIN Lie-shu 261
Drawability of thin magnetron sputtered Al-Zr foils in micro deep drawing Gerrit BEHRENS, Julien KOVAC, Bernd KÖ,HLER, Frank VOLLERTSEN, Heinz-Rolf STOCK 268
Characterization of plastic behaviour of sheet metals by hydraulic bulge test Lucian L&#,Z&#,RESCU, Dan-sorin COM&#,A, Ioan NICODIM, Ioan CIOBANU, Dorel BANABIC 275
Mechanics condition of thin-walled tubular component with rib hydroforming CHU Guan-nan, YANG Shuai, WANG Jian-xun 280
Springback mechanism and compensation of cryogenic Ti alloy tube after numerically controlled bending ZHAN Mei, ZHAI Hua-dong, YANG He 287
Plastic damage of T-shape hydroforming TENG Bu-gang, YUAN Shi-jian, CHEN Zeng-tao, JIN Xue-run 294
Pre-bulging effect during sheet hydroforming process of aluminum alloy box with unequal height and flat bottom LANG Li-hui, WANG Yong-ming, XIE Ya-su, YANG Xi-ying, XU Ying-qiang 302
Welded double sheet hydroforming of complex hollow component LIU Wei, CHEN Yi-zhe, LIU Gang, CUI Xiao-lei 309
Advanced feature detection algorithms for incrementally formed sheet metal parts Amar Kumar BEHERA, Bert LAUWERS, Joost R. DUFLOU 315
Ultrasonic thickness measurement for aluminum alloy irregular surface parts based on spectral analysis CONG Sen, GANG Tie 323
Control strategy of over-bending setting round for pipe-end of large pipes by mould press type method ZHAO Jun, ZHAN Pei-pei, MA Rui, ZHAI Rui-xue 329
Forming of New Materials
Experimental measurement and theoretical prediction of forming limit curve for aluminum alloy 2B06 LI Xiao-qiang, SONG Nan, GUO Gui-qiang 335
Comparative analysis between stress- and strain-based forming limit diagrams for aluminum alloy sheet 1060 FANG Gang, LIU Qing-jun, LEI Li-ping, ZENG Pan 343
Plastic deformation on hydroforming of aluminum alloy tube with rectangular sections WANG Xiao-song, YUAN Shi-jian, SONG Peng, XIE Wen-cai 350
Springback law of thin-walled 6061-T4 Al-alloy tube upon bending LI Heng, SHI Kai-peng, YANG He, TIAN Yu-li 357
Formability and microstructure of AA6061 Al alloy tube for hot metal gas forming at elevated temperature HE Zhu-bin, FAN Xiao-bo, SHAO Fei, ZHENG Kai-lun, WANG Zhi-biao, YUAN Shi-jian 364
Effect of pre-deformation on microstructure and mechanical properties of 2219 aluminum alloy sheet by thermomechanical treatment AN Li-hui, CAI Yang, LIU Wei, YUAN Shi-jian, ZHU Shi-qiang, MENG Fan-cheng 370
Effect of internal pressure on corner radius and thickness distribution of shear hydro-bending of 5A02 aluminum alloy tube WANG Yong, HAN Cong, YUAN Shi-jian 376
Shear hydro-bending of 5A02 aluminum alloys rectangular tubes HAN Cong, XU Yong-chao, WANG Yong, ZANG Chao, YUAN Shi-jian 382
Deformation behavior of 5A06 aluminum alloy sheet for rapid gas forming at elevated temperature FAN Xiao-bo, HE Zhu-bin, YUAN Shi-jian 389
Influence of interfacial adhesion strength on formability of AA5052/polyethylene/AA5052 sandwich sheet LIU Jian-guang, LIU Wei, WANG Jing-xuan 395
Effect of equal channel angular pressing and torsion on SiC-particle distribution of SiCp-Al composites LI Ping, ZHANG Xiang, XUE Ke-min, LI Xiao 402
Warm hydroforming of magnesium alloy tube with large expansion ratio within non-uniform temperature field LIU Gang, ZHANG Wen-da, HE Zhu-bin, YUANShi-jian, LIN Zhe 408
Springback characteristics of AZ31 magnesium alloy as-extruded profile in warm tension-rotation bending process XIAO Han, ZHANG Shi-hong, ZHOU Rong, LU De-hong 416
Microstructure and properties of AZ80 alloy semisolid billets fabricated by new strain induced melt activated method JIANG Ju-fu, WANG Ying, DU Zhi-ming, LUO Shou-jing 422
Microstructural evolution and mechanical properties of ZK60 magnesium alloy prepared by multi-axial forging during partial remelting TAO Jian-quan, CHENG Yuan-sheng, HUANG Shao-dong, PENG Fei-fei, YANG Wen-xuan, LU Mei-qi, ZHANG Zhi-ming, J 428
Spheroidal microstructure formation and thixoforming of AM60B magnesium alloy prepared by SIMA process WANG Li-ping, JIANG Wen-yong, CHEN Tian, FENG Yi-cheng, ZHOU Hong-yu, ZHAO Si-cong, LIANG Zhen-qiang, ZHU Yan 435
Microstructures and mechanical properties of pure magnesium bars by high ratio extrusion and its subsequent annealing treatment SUN Hong-fei, LI Cheng-jie, XIE Yang, FANG Wen-bin 445
Microstructure evolution and mechanical properties of AZ80 alloy reheated from as-cast and deformed states ZHAO Gao-zhan , YANG Lin , DUAN Xun-xing, REN Xiao-hua, ZHU Li-min, YANG Ting-jun, GUO Xiang-yong, HAO Shao- 450
Modelization and comparison of Norton-Hoff and Arrhenius constitutive laws to predict hot tensile behavior of Ti-6Al-4V alloy ZHANG Chao, LI Xiao-qiang, LI Dong-sheng, JIN Chao-hai, XIAO Jun-jie 457
Hot deformation behavior of in-situ TiBw/Ti6Al4V composite with novel network reinforcement distribution ZHANG Yu-zi, HUANG Lu-jun, LIU Bao-xi, GENG Lin 465
Superplastic forming Ti-6Al-4V titanium alloy cylinder with near uniform thickness distribution JIANG Shao-song, LU Zhen, HE Xiao-dong, WANG Guo-feng, ZHANG Kai-feng 472
Mechanical properties and formability of TA2 extruded tube for
hot metal gas forming at elevated temperature
HE Zhu-bin, TENG Bu-gang, CHE Chang-yong, WANG Zhi-biao, ZHENG Kai-lun, YUAN Shi-jian 479
Effect of sintering neck on compressive mechanical properties of porous titanium ZOU Chun-ming, Liu Yan, YANG Xin, WANG Hong-wei, WEI Zun-jie 485
Characterization of TiAl-based alloy with high-content Nb by powder metallurgy SUN Hong-fei, LI Xue-wen, FENG Jie, FANG Wen-bin 491
Smart hot stamping of ultra-high strength steel parts Ken-ichiro MORI 496
Influence of asymmetric hot rolling on microstructure and rolling force with austenitic steel Jie LIU, Rudolf KAWALLA 504
Manufacturing of complex high strength components out of high nitrogen steels at industrial level Hannes NONEDER, Marion MERKLEIN 512
Dynamic recrystallization rules in needle piercing extrusion for
AISI304 stainless steel pipe
GUO Liang-gang, DONG Ke-ke, ZHANG Bao-jun, YANG He, ZHENG Wen-da , LIU Xiong-wei 519
3D numerical analysis of material flow behavior and flash formation of 45# steel in continuous drive friction welding JI Shu-de, LIU Jian-guang, YUE Yu-mei, LÜ, Zan, FU Li 528
Effect of tool temperature and punch speed on hot stamping of ultra high strength steel LIU Wei, LIU Hong-sheng, XING Zhong-wen, LIU Gang, BAO Jun 534
Hot formation quality of high strength steel BR1500HS for hot stamping without cooling system LIU Hong-sheng, XING Zhong-wen, LEI Cheng-xi 542
Magnetic pulse joining of aluminum alloy-carbon steel tubes YU Hai-ping, XU Zhi-dan, JIANG Hong-wei, ZHAO Zhi-xue, LI Chun-feng 548
Cold-pressing deformation characteristics of steel-aluminum sheets joining LI Feng, LIN Jun-feng, SUI Xiao-chong, BIAN Nan, XU Ming-da 553
Wrinkling behavior of hydro bending of carbon steel/Al-alloy bi-layered tubes TENG Bu-gang, HU Lan, LIU Gang, YUAN Shi-jian 560
Compressive property and energy absorption characteristic of 3D open-cell Ni-Cr-Fe alloy foams under quasi-static conditions PANG Qiu, WU Gao-hui, SUN Dong-li, XIUZi-yang, ZHANG Qiang, HUZhi-li 566
Size effect on indentation depth of oxygen-free high purity copper induced by laser shock processing HU Yong-xiang, LI Kang-mei, QI Chen-jie, YAO Zhen-qiang, Ramana V. GRANDHI 573

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn