Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

Transactions of Nonferrous Metals Society of China

中国有色金属学报(英文版)

Vol. 22    No. 10    October 2012


Structural Materials
Microstructure characterization on Mg-2Nd-4Zn-1Zr alloy during heat treatment LIANG Min-jie, LIAO Hai-hong, DING Wen-jiang, PENG Li-ming, FU Peng-huai 2327
Effect of microstructure on impact toughness of magnesium alloys HUANG Zheng-hua, QI Wen-jun, XU Jing 2334
Effect of heat treatment on microstructure, mechanical properties and in vitro degradation behavior of as-extruded Mg-2.7Nd-0.2Zn-0.4Zr alloy ZHANG Xiao-bo, XUE Ya-jun, WANG Zhang-zhong 2343
Mechanical properties of Mg-6Gd-1Y-0.5Zr alloy processed by low temperature thermo-mechanical treatment LI De-jiang, ZENG Xiao-qin, XIE Yan-cai, WU Yu-juan, DING Wen-jiang, CHEN Bin 2351
Effect of cooling condition on microstructure of semi-solid AZ91 slurry produced via ultrasonic vibration process ZHANG Liang, WU Guo-hua, WANG Shao-hua, DING Wen-jiang 2357
Effects of isothermal process parameters on semisolid microstructure of Mg-8%Al-1%Si alloy CAO Li-jie, MA Guo-rui, TANG Chun-chong 2364
Effect of flow stress-strain relation on forming limit of 5754O aluminum alloy WANG Hai-bo, WAN Min, YAN Yu 2370
High temperature tensile properties of laser butt-welded plate of Inconel 718 superalloy with ultra-fine grains QU Feng-sheng, LIU Xu-guang, XING Fei, ZHANG Kai-feng 2379
Fracture characteristics of notched investment cast TiAl alloy through in situ SEM observation CHEN Yan-fei, ZHENG Shun-qi, TU Jiang-ping, XIAO Shu-long, TIAN Jing, XU Li-juan, CHEN Yu-yong 2389
Effect of heat treatment on microstructure and tensile strength of NiCoCrAl alloy sheet fabricated by EB-PVD SHI Guo-dong, WANG Zhi, WANG Yi-shou, WU Zhan-jun, LIANG Jun 2395
Microstructural evolution of zirconium alloy under dynamic compression at strain rate of 1000 s-1 ZOU Dong-li, LUAN Bai-feng, LIU Qing 2402
Non-isothermal oxidation and ignition prediction of Ti-Cr alloys MI Guang-bao, HUANG Xiu-song, LI Pei-jie, CAO Jing-xia, HUANG Xu, CAO Chun-xiao 2409
Influence of electron-beam superposition welding on intermetallic layer of Cu/Ti joint CHEN Guo-qing, ZHANG Bing-gang, LIU Wei, FENG Ji-cai 2416
FEM simulation and experimental verification of temperature field and phase transformation in deep cryogenic treatment LI Jun-wan, TANG Lei-lei, LI Shao-hong, WU Xiao-chun 2421
Lubrication properties of Nitinol 60 alloy used as high-speed rolling bearing and numerical simulation of flow pattern of oil-air lubrication ZENG Qun-feng, ZHAO Xi-meng, DONG Guang-neng, WU Hong-xing 2431
Site occupation evolution of alloying elements in L12 phase during phase transformation in Ni75Al7.5V17.5 ZHANG Ming-yi, LIU Fu, CHEN Zheng, GUO Hong-jun, YUE Guang-quan, YANG Kun 2439
Scale effect mechanism on micro rod upsetting deformation analyzed by crystal plasticity model CHENG Li-dong, WANG Zhen-long 2444
Functional Materials
Self-assembly of hierarchical ZnSnO3-SnO2 nanoflakes and their gas sensing properties ZENG Yi, BING Yi-fei, LIU Chang, ZHENG Wei-tao, ZOU Guang-tian 2451
Synthesis and photoluminescence properties of single-crystal ZnO hexagonal pyramids by PEG400-assisted thermal decomposition route LIU Jin-song, ZHANG Shuo, LI Zi-quan, ZHU Kong-jun, CHEN Jian-kang, QIU Jin-hao, WANG Chun-hua, GAO Xue-qi 2459
Microwave-hydrothermal preparation of flower-like ZnO microstructure and its photocatalytic activity WU Shui-sheng, JIA Qing-ming, SUN Yan-lin, SHAN Shao-yun, JIANG Li-hong, WANG Ya-ming 2465
Selective synthesis and shape-dependent photoluminescence properties of (Y0.95Eu0.05)2O3 submicron spheres and microplates ZHU Qi, LI Ji-guang, XU Yong, LI Xiao-dong, SUN Xu-dong 2471
Preparation of spherical activated carbon-supported and Er3+:YAlO3-doped TiO2 photocatalyst for methyl orange degradation under visible light DONG Shuang-shi, ZHANG Jian-bin, GAO Lin-lin, WANG Yan-long, ZHOU Dan-dan 2477
Synthesis of nano-MoS2/bentonite composite and its application for removal of organic dye HU Kun-hong, ZHAO Di-fang, LIU Jun-sheng 2484
Preparation of Al2O3/Au nano-laminated composite coatings and their oxidation resistance on stainless steel GAO Jun-guo, LU Feng, TANG Zhi-hui, WANG Chang-liang, HE Ye-dong 2491
Interface characteristics of Al2O3-13%TiO2 ceramic coatings prepared by laser cladding GAO Xue-song, TIAN Zong-jun, LIU Zhi-dong, SHEN Li-da 2498
Langmuir-Blodgett assembly of ultra-large graphene oxide films for transparent electrodes ZHENG Qing-bin, SHI Li-fang, YANG Jun-he 2504
Damping capacity of BaTiO3/Al composites fabricated by hot extrusion FAN Gen-lian, LI Zhi-qiang, ZHANG Di 2512
Ultrasonic synthesis of CoO/graphene nanohybrids as high performance anode materials for lithium-ion batteries CHEN Bing-di, PENG Cheng-xin, CUI Zheng 2517
Preparation of uniform flower-like CuO and flower-like CuO/graphene composite and their application in lithium ion batteries CHEN Han, FENG Fan, HU Zhong-liang, LIU Fu-sheng, GONG Wen-qiang, XIANG Kai-xiong 2523
Synthesis of nanostructured Li2FeSiO4/C cathode for lithium-ion battery by solution method YANG Rong, LIU Xiao-yan, QU Ye, LEI Jing, Jou-Hyeon AHN 2529
Synthesis of LiMnPO4/C composite material for lithium ion batteries by sol-gel method ZHONG Sheng-kui, WANG You, LIU Jie-qun, WANG Jian 2535
Synthesis of spinel LiMn2O4 microspheres with durable high rate capability ZHOU Yu-bo, DENG Yuan-fu, YUAN Wei-hao, SHI Zhi-cong, CHEN Guo-hua 2541
Preparation, microstructure and dislocation of solar-grade multicrystalline silicon by directional solidification from metallurgical-grade silicon SU Hai-jun, ZHANG Jun, LIU Lin, FU Heng-zhi 2548
Topology optimization of microstructure and selective laser melting fabrication for metallic biomaterial scaffolds XIAO Dong-ming, YANG Yong-qiang, SU Xu-bin, WANG Di, LUO Zi-yi 2554
Characterisation of wear particles from biomedical carbon/carbon composites with different preforms in hip joint simulator ZHANG Lei-lei, LI He-jun , ZHANG Shou-yang, LU Jin-hua, ZHANG Yu-lei, ZHAO Xue-ni, GU Cai-ge, ZENG Xie-rong 2562
Microstructures and formation mechanism of headstand pyrocarbon cones developed by electromagnetic-field-assisted CVD TU Chuan-jun, HUANG Qi-zhong, ZHANG Ming-yu, ZHAO Xin-qi, CHEN Jiang-hua 2569
Modeling of Ni4Ti3 precipitation during stress-free and stress-assisted aging of bi-crystalline NiTi shape memory alloys KE Chang-bo, CAO Shan-shan, MA Xiao, ZHANG Xin-ping 2578
Effect of wear conditions on tribological properties of electrolessly-deposited Ni-P-Gr-SiC hybrid composite coating HE Mei-feng, HU Wen-bin, ZHONG Cheng, WENG Jun-fei, SHEN Bin, WU Ya-ting 2586

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn