Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

Transactions of Nonferrous Metals Society of China

中国有色金属学报(英文版)

Vol. 20    Special 3    September 2010


Material Development and Alloy Design
X38CrMoV5 hot-work tool steel as tool material for thixoforging of steel: Numerical and experimental evaluation A. RASSILI, J. C. PIERRET, G. VANEETVELD, J. HALLEUX, G. WALMAG, J. LECOMTE-BECKERS 713
Application of semisolid process to Zr-based metallic glass matrix composites T. Tamura, A. Makaya, K. Miwa 719
Commercial AM60 alloy for semisolid processing:
 Effects of continuous rheoconversion process on microstructure
XING Bo (邢博), LI Yuan-dong (李元东), MA Ying (马颖),HAO Yuan (郝远), D.APELIAN 723
Fabrication of AZ31 alloy wire by continuous semisolid extrusion process GUAN Ren-guo(管仁国), ZHAO Zhan-yong(赵占勇), SUN Xiao-ping(孙小平), HUANG Hong-qian(黄红乾), DAI Chun-guang(戴春光), ZHANG Qiu-sheng(张秋生) 729
Microstructure and Properties
In situ microtomography investigation of microstructural evolution in Al-Cu alloys during holding in semi-solid state S. TERZI,L. SALVO, M. SUERY, A. DAHLE, E. BOLLER 734
Microstructure evolution and thixoextrusion of
AZ91D magnesium alloy produced by SSTT
CHENG Yuan-sheng(程远胜), CHEN Qiang(陈强), HUANG Zhe-qun(黄哲群), HUANG Shu-hai(黄树海) 739
Microstructure of semi-solid ADC12 aluminum alloy adopting
new SIMA method
WANG Zhen-yu(王振宇), JI Ze-sheng(吉泽升), SUN Li-xin(孙丽鑫), XU Hong-yu(许红雨) 744
Microstructure of AZ91D magnesium alloy semi-solid billets prepared by SIMA method from chips XU Hong-yu(许红雨), JI Ze-sheng(吉泽升), HU Mao-liang(胡茂良), WANG Zhen-yu(王振宇) 749
Microstructure and mechanical properties of rheo-diecasted A390 alloy ZHAO Jun-wen(赵君文), WU Shu-sen (吴树森) 754
Effect of semi-solid processing on microstructure and mechanical properties of 5052 aluminum alloy Lü Shu-lin(吕书林), WU Shu-sen (吴树森), ZHU Ze-ming(朱泽明), AN Ping(安萍),MAO You-wu(毛有武) 758
Microstructure and properties of rheo-diecast Al-20Si-2Cu-1Ni-0.4Mg alloy with direct ultrasonic vibration process WU Shu-sen (吴树森), ZHONG Gu (钟鼓), WAN Li (万里), AN Ping (安萍), MAO You-wu(毛有武) 763
Microstructural evolution of Mg9AlZnY alloy with vibration in
lost foam casting during semi-solid isothermal heat treatment
ZHAO Zhong(赵忠), FAN Zi-tian(樊自田), JIANG Wen-ming(蒋文明), DONG Xuan-pu(董选普) 768
Experimental studies and phase field modeling of microstructure evolution during solidification with electromagnetic stirring P. Gerald Tennyson, P. Kumar, H. Lakshmi, G. Phanikumar, P. Dutta 774
Microstructural characteristics of thixoforged A356 alloy in mushy state S. TAHAMTAN, A. FADAVI BOOSTANI 781
Synthesis and characterization of 356-SiCp composites by
stir casting and compocasting methods
S. AMIRKHANLOU, B. NIROUMAND 788
Design of experiments for determination of influence of different
parameters on mechanical properties of semi-solid extruded parts
V. POUVAFAR, S. A. SADOUGH, F. HOSSEINJ, M. R. RAHMANI 794
Mechanical properties of thixo-formed austempered ductile iron B. HEIDARIAN, M. NLILI-AHMADABADI, M. MORADI 798
Characterization on morphology evolution of primary phase in semisolid A356 under slightly electromagnetic stirring LIU Zheng (刘政), MAO Wei-min (毛卫民), LIU Xiao-mei (刘小梅) 805
Thixotropic compression deformation behavior of SiCp/AZ61 magnesium matrix composites YAN Hong (闫洪), WANG Jian-jin(王建金) 811
Microstructure evolution behavior of AlSi9Cu3 alloy during rheocasting GUO Hong-min(郭洪民), LIU Xu-bo(刘旭波), YANG Xiang-jie(杨湘杰), ZHANG Ai-sheng(章爱生), LIU Yong(刘勇) 815
In-situ observation of crystal detachment behavior in NH4Cl-H2O system  from chilling metal surface with vibration ZHANG Ying(张莹), WANG Meng(王猛), DU Li-cheng(杜立成), LIN Xin(林鑫), HUANG Wei-dong(黄卫东) 821
Morphological evolution of non-dendritic microstructure during
solidification under stirring
LIN Xin(林鑫), TONG Lei-lei(统雷雷), ZHAO Li-ning(赵力宁), WANG Li-lin(王理林), WANG Meng(王猛), HUANG Wei-dong(黄卫东) 826
Semi-solid rheocasting of grain refined aluminum alloy 7075 U. A. CURLE, G. GOVENDER 832
Influence of surface liquid segregation on corrosion behavior of semi‑solid metal high pressure die cast aluminium alloys E. P. MASUKU , H. MÖ,LLER, U. A. CURLE, P. C. PISTORIUS, W. LI 837
Influence of elevated Fe, Ni and Cr levels on tensile properties of
SSM-HPDC Al-Si-Mg alloy F357
H. Mö,LLER, W. E. STUMPF, P. C. PISTORIUS 842
Characterization of surface liquid segregation in SSM-HPDC aluminium alloys 7075, 2024, 6082 and A201 H. Mö,LLER, U. A. CURLE , E. P. MASUKU 847
Wear of semi-solid rheocast SiCp/Al metal matrix composites U. A. CURLE, L. IVANCHEV 852
Effects of primary phase morphology on mechanical properties of Al-Si-Mg-Fe alloy in semi-solid slurry casting process R. BURAPA, S. JANUDOM, T. CHUCHEEP, R. CANYOOK, J. WANNASIN 857
Microstructure and mechanical properties of rheo-diecasting AZ91D Mg alloy YANG Liu-qing(杨柳青), KANG Yong-lin(康永林), ZHANG Fan(张帆), XU Jun(徐骏) 862
Rheology, Modelling and Simulation
Effect of high shear rate on solidification microstructure of
semisolid AZ91D alloy
ZHU Guang-lei (朱光磊), XU Jun (徐骏), ZHANG Zhi-feng (张志峰), LIU Guo-jun(刘国钧),Z. Fan 868
Effects of annular electromagnetic stirring processing parameters on
semi-solid slurry production
CHEN Xing-run(陈兴润), ZHANG Zhi-feng(张志峰), XU Jun(徐骏) 873
Prediction of shear-related defect locations in semi-solid casting using numerical flow models F. PINEAU, G. D’AMOURS 878
Rheological behavior of semi-solid Mg2Si/AM60
magnesium matrix composites at steady state
HU Yong(胡勇), HE Bo-lin(何柏林), YAN Hong(闫洪) 883
Numerical simulation and experiment validation of thixoforming angle frame of AZ61 magnesium alloy JIANG Ju-fu (姜巨福), WANG Ying (王迎), QU Jian-jun (曲建俊), DU Zhi-ming (杜之明), LUO Shou-jing (罗守靖) 888
Investigation of semi-solid aluminum alloy filling-plastic
flowing in thixoforging
DU Zhi-ming (杜之明), LIU Jun (柳君), CHEN Gang(陈刚), QIN Jin (秦晋), XIE Shui-sheng (谢水生) 893
Numerical simulation of solidification of liquid aluminum alloy flowing on cooling slope N. K. KUND, P. DUTTA 898
Rheological behavior, microstructure and hardness of A356 aluminum alloy in semisolid state using backward extrusion process S. A. SADOUGH, M. R. RAHMANI, V. POUYAFAR 906
Treatment of discontinuous interface in liquid-solid forming with extended finite element method ZHOU Ji-ming(周计明), QI Le-hua(齐乐华) 911
Characterization of thixoforming process of 100Cr6 steel K. P. SO&#,EK , A. RASSILI , J. C. PIERRET , G. VANEETVELD 916
Numerical simulation on thixo-co-extrusion of double-layer tube with A356/AZ91D WANG Kai-kun(王开坤), SUN Jian-lin (孙建林), MENG Hai-feng (孟海峰),DU Yan-mei (杜艳梅), WANG Xi (王晰) 921
Numerical simulation of a thixocasting process for AISI420 stainless steel air-turbine blade DAO Van-luu(陶文琉), ZHAO Sheng-dun(赵升吨), ZHANG Qi(张琦) 926
Simulation of semisolid diecasting process of
four-way valve of HPb59-1 alloy for air-conditioner
YAN Guan-hai(闫观海), ZHAO Sheng-dun(赵升吨), SHA Zheng-hui(沙郑辉) 931
Process Development
Stability of steel thixoforming process J. C. PIERRET, A. RASSILI, G. VANEETVELD, J. LE, COMTE-BECKERS 937
Electro-pulse modification and reheating process for production of thixotropic microstructure in AlSi7Mg alloy TIAN Wen-tong(田文彤), ZHANG Guang-an(张广安) 943
Suitability of lost cores in rheocasting process H. Michels, M. Bünck, A. Bührig-Polaczek 948
Metal flow and die wear in semi-solid forging of steel using coated dies L. KHIZHNYAKOVA, M. EWERING, G. HIRT, K. BOBZIN, N. BAGCIVAN 954
Induction reheating of A356.2 aluminum alloy and thixocasting as automobile component H. LAKSHMI, M. C. VINAY KUMAR, RAGHUNATH, P. KUMAR, V. RAMANARAYANAN, K. S. S. MURTHY, P. DUTTA 961
Effects of casting factors of cooling slope on semisolid condition T. HAGA, R. NAKAMURA, R. TAGO, H. WATARI 968
Reverse design of microstructure and application effectiveness for semi-solid processing of aluminum alloy YANG Yi-tao(杨弋涛), YIN Xiang-lin(尹湘林), SUN Bao-liang(孙保良), ZHANG Heng-hua(张恒华), JIN Xiao-chun(金晓春), SHAO Guang-jie(邵 973
Semi-solid gravity sand casting using gas induced semi-solid process T. CHUCHEEP, R. BURAPA, S. JANUDOM, S. WISUTMETHANGOON, J. WANNASIN 981
Preparation of SiCp/A356 electronic packaging materials and its thixo-forging WANG Kai-kun(王开坤), KANG Yong-lin(康永林), SONG Pu-guang(宋普光), XU Feng(徐峰), LI Xian-hui(黎先辉) 988
Industrial Applications & Others
Modified rheological processing technology and its applications in iron and steels XING Shu-ming(邢书明), BAO Pei-wei(鲍培玮), LI Nan(李楠), YAO Shu-qing(姚淑卿) 993
Thixocasting combination spanners using stainless steel X39CrMo17 M. BÜ,NCK, E. SUBASIC, A. BÜ,HRIG-POLACZEK, K. JIANG, S. MÜ,NSTERMANN, J. M. SCHNEIDER, K. FICKERT, H. J 998
Thixoextrusion of A357 aluminium alloy A. FORN, G. VANEETVELD, J. C. PIERRET, S. MENARGUES, M. T. BAILE, M. CAMPILLO, A. RASSILI 1005
Research and development of gas induced semi-solid process for industrial applications J. WANNASIN, S. JANUDOM, T. RATTANOCHAIKUL, R. CANYOOK, R. BURAPA, T. CHUCHEEP, S. THANABUMRUNGKUL 1010
Industrial development of gas induced semi-solid process S. THANABUMRUNGKUL, S. JANUDOM, R. BURAPA, P. DULYAPRAPHANT, J. WANNASIN 1016
AlTiN and AlTiON-coated hot work tool steels for tooling in steel thixoforming Y. BIROL, D. ISLER 1022
SiC nanoparticles reinforced magnesium matrix composites fabricated by
 ultrasonic method
WANG Zhao-hui(王朝辉), WANG Xu-dong(王旭东), ZHAO Yu-xin(赵宇昕), DU Wen-bo(杜文博) 1029
Characteristics of 100Cr6 bearing steel after thixoforming process performed   with prototype device &#,. ROGAL, J. DUTKIEWICZ, T. CZEPPE , J. BONARSKI, B. OLSZOWSKA-SOBIERAJ 1033
Structure of miniature components from steel produced by
forming in semi-solid state
b. Masek, D. Aisman, M. Behulova, H. Jirkova 1037
Semi-solid moulding: Competition to cast and machine from forging in making automotive complex components Q. ZHU, S. P. MIDSON 1042
A review on steel thixoforming A. RASSILI, H. V. ATKINSON 1048

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn