Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

Transactions of Nonferrous Metals Society of China

中国有色金属学报(英文版)

Vol. 19    Special 2    September 2009


Deformation behavior of fine-grained 5083 Al alloy at elevated temperature ZHANG Kai-feng(张凯锋), YAN Hong-hua(闫宏华) 307
Finite element analysis of stiffness and static dent resistance of aluminum alloy double-curved panel in viscous pressure forming LI Yi(李毅), WANG Zhong-Jin(王忠金) 312
Quasi-static-dynamic formability of AA5052-O sheet under uniaxial and plane-strain tension LIU Da-hai(刘大海), YU Hai-ping(于海平), LI Chun-feng(李春峰) 318
Grain refining and property improvement of AZ31 Mg alloy by hot rolling MIAO Qing(苗青), HU Lian-xi(胡连喜), SUN Hong-fei(孙宏飞), WANG Er-de(王尔德) 326
Effects of solution treatment and aging process on microstructure refining of semi-solid slurry of wrought aluminum alloy 7A09 WU Xin(吴欣), HAN Fei(韩飞), WANG Wei-wei(王卫卫) 331
Effect of heat treatment on mechanical properties of thixoformed 7A09 aluminum alloy WANG Wei-wei(王卫卫), JIA Bin-bin(贾彬彬), LUO Shou-jing(罗守靖) 337
Microstructural evolution of spray-formed Al-11.5Zn-2.0Mg-1.6Cu alloy during hot-extrusion and heat-treatment GUO Shu(郭舒), NING Zhi-liang(宁志良), CAO Fu-yang(曹福洋), SUN Jian-fei(孙剑飞) 343
Mechanical properties and texture evolution during
hot rolling of AZ31 magnesium alloy
SUN Hong-fei(孙宏飞), LIANG Shu-jin(梁书锦), WANG Er-de(王尔德) 349
Effect of Al and Zn additives on grain size of Mg-3Ni-2MnO2 alloy FANG Wa(房娃), SUN Hong-fei(孙宏飞), FANG Wen-bin(房文斌), WANG Bin(王彬) 355
Fabrication and microstructure of nanostructured Mg-3Ni-2MnO2 by ball milling in hydrogen atmosphere FANG Wen-bin(房文斌), FANG Wa(房娃), SUN Hong-fei(孙宏飞), YU Zhen-xing(于振兴) 359
Hydriding and microstructure nanocrystallization of ZK60 Mg alloy by reaction milling in hydrogen YUAN Yuan(袁媛), WANG Heng(王珩), HU Lian-xi(胡连喜), SUN Hong-fei(孙宏飞), FANG Wen-bin(房文斌) 363
Mechanical behaviour of Al/Al2O3 composite in pseudo-semi-solid state during isothermal compression CHENG Yuan-sheng(程远胜), LUO Shou-jing(罗守靖) 368
Effects of extrusion deformation on mechanical properties of sub-micron Si3N4p/2024 composite XIU Zi-yang(修子扬), CHEN Guo-qin(陈国钦), LIU Yan-mei(刘艳梅),YANG Wen-shu(杨文澍), WU Gao-hui(武高辉) 373
Microstructure and thermal conductivity of  submicron Si3N4 reinforced 2024Al composite YANG Wen-shu(杨文澍), XIU Zi-yang(修子扬), CHEN Guo-qin(陈国钦), WU Gao-hui(武高辉) 378
Nonlinear temperature characteristic of thermal expansion of Grf/Mg composites SONG Mei-hui (宋美慧), XIU Zi-yang(修子扬), WU Gao-hui(武高辉), CHEN Guo-qin(陈国钦) 382
Optimization of processing parameters for preparation of
Al-3Ti-1B grain refiner
LI Bao(李豹), WANG Hong-wei(王宏伟), ZHAO Rui-feng(赵瑞峰), WEI Zun-jie(魏尊杰) 387
Influence of processing parameters on coating surface roughness of aluminum alloy PAN Ming-qiang(潘明强), CHI Guan-xin(迟关心), WEI Dong-bo(韦东波), DI Shi-chun(狄士春) 392
Hydroforming of AZ61A tubular component with various cross sections TANG Ze-jun(汤泽军), HE Zhu-bin(何祝斌), LIU Gang(刘钢) YUAN Shi-jian(苑世剑), HU Lan(胡蓝) 398
Effects of hydrogenation on ambient deformation behaviors of Ti-45Al alloy SU Yan-qing(苏彦庆), LIU Xin-wang(刘鑫旺), ZHAO Long(赵龙), WANG Liang(王亮), GUO Jing-jie(郭景杰), FU Heng-zhi(傅恒志) 403
Effect of electropulsing on anisotropy behaviour of cold-rolled commercially pure titanium sheet WANG Zhong-jin(王忠金), SONG Hui(宋辉) 409
Microstructure and mechanical properties of Ti6Al4V/Cu-10Sn bronze diffusion-bonded joint ZHAO He(赵贺), CAO Jian(曹健), FENG Ji-cai(冯吉才) 414
Superplastic forming of Ti6Al4V alloy using ZrO2-TiO2 ceramic die with adjustable linear thermal expansion coefficient JIANG Shao-song(蒋少松), ZHANG Kai-feng(张凯峰) 418
Effect of hydrogen content and stress state on  room-temperature mechanical properties of Ti-6Al-4V alloy YUAN Bao-guo(袁宝国), LI Chun-feng(李春峰), YU Hai-ping(于海平), SUN Dong-li(孙东立) 423
Superplastic formability of Ti-6Al-4V butt-welded plate by
 laser beam welding
WANG Gang(王刚), ZHANG Wen-cong(张文丛), ZHANG Gong-lei(张功磊), XU Zhi-liang(徐志良) 429
Micro electrical discharge machining of small hole in TC4 alloy LI Mao-sheng(李茂盛), CHI Guan-xin(迟关心), WANG Zhen-long(王振龙), WANG Yu-kui(王玉魁), DAI Li(戴立) 434
Microstructure evolution of as-cast Nb-Ti-C alloys WEI Wen-qing(魏文庆), WANG Hong-wei(王宏伟), GAO Zeng-xin(高增新), WEI Zun-jie(魏尊杰) 440
Properties of vacuum cast CuCr25 and CuCr25Te contact material XIU Shi-xin(修士新), YANG Ren(杨韧), XUE Jun(薛军), WANG Jin-xing(汪金星) 444
Fabrication and thermo-physical properties of TiB2p/Cu composites for electronic packaging applications CHENGuo-qin(陈国钦), XIU Zi-yang(修子扬), MENG Song-he(孟松鹤),WU Gao-hui(武高辉), ZHU De-zhi(朱德志) 448
Effect of extrusion ratio on coating extrusion of Pb-GF composite wire by numerical simulation and experimental investigation WANG Xin(王欣), SUN Hong-fei(孙宏飞), FANG Wen-bin(房文斌) 453
Multiscale simulation and nanoindentation experimental study of initial plasticity of Fe single crystal YUAN Lin(袁林), SHAN De-bin(单德彬), GUO Bin(郭斌) 458
Influence of processing parameters and heat treatment on phase composition and microstructure of plasma sprayed hydroxyapatite coatings ZHAO Guo-liang(赵国亮), WEN Guang-wu(温广武), WU Kun(吴昆) 463
Influence of voids on interlaminar shear strength of carbon/epoxy fabric laminates ZHU Hong-yan(朱洪艳), LI Di-hong(李地红), ZHANG Dong-xing(张东兴),WU Bao-chang(吴宝昌), CHEN Yu-yong(陈玉勇) 470
Effect of preparation conditions on selective oxidation of propane to acrylic acid YU Zhen-xing(于振兴), ZHENG Wei(郑伟), XU Wen-long(徐文龙),ZHANG Yu-hang(张宇航), FU Hong-ying(付红英), ZHANG Ping(张平) 476
a novel one-step method to synthesize copper nitrate hydroxide nanorings Wang Xin-bo(王新波), Huang Long-nan(黄龙男) 480
Flow field simulation of double layer atomizer ZHAO Wen-jun(赵文军), CAO Fu-yang(曹福洋), NING Zhi-liang(宁志良), SUN Jian-fei(孙剑飞) 485
Factors governing heat affected zone during wire bonding SUN Li-ning(孙立宁), LIU Yue-tao(刘曰涛), LIU Yan-jie(刘延杰) 490
Temperature and stress fields of multi-track laser cladding ZHAO Hong-yun (赵洪运), ZHANG Hong-tao(张洪涛), XU Chun-hua(徐春华), YANG Xian-qun(杨贤群) 495
An evaluation analysis method for corrosion morphology
characterization based on Gaussian filter
ZHANG Peng (张鹏), GUO Bin (郭斌), CHENG Shu-kang (程树康) 502
Effect of thickness and grain size on material behavior in micro-bending SHAN De-bin(单德彬), WANG Chun-ju(王春举), GUO Bin(郭斌), WANG Xin-wei(汪鑫伟) 507
Effects of specimen size on flow stress of micro rod specimen WANG Chun-ju(王春举), GUO Bin(郭斌), SHAN De-bin(单德彬), SUN Li-ning(孙立宁) 511
Flow stress and tribology size effects in scaled down cylinder compression GUO Bin(郭斌), GONG Feng(龚峰), WANG Chun-ju(王春举), SHAN De-bin(单德彬) 516
Micro precision casting based on investment casting for micro structures with high aspect ratio YANG Chuang(杨闯), LI Bang-sheng(李邦盛), REN Ming-xing(任明星), FU Heng-zhi(傅恒志) 521
Surface finish ­­of micro punch with ion beam irradiation XU Jie(徐杰), WANG Chun-ju(王春举), GUO Bin(郭斌),SHAN De-bin(单德彬), Y. SUGIYAMA, S. ONO 526

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f-ysxb@mail.csu.edu.cn