Structural Materials |
Microstructure evolutions of semisolid slurry of 2024 wrought aluminum alloy during continuous cooling and isothermal holding |
LI Yuan-dong, LIU Xing-hai, LI Yan-lei, SUO Jiang-long, ZHOU Hong-wei, ZHANG Xin-long |
3015 |
Texture and mechanical anisotropy of AZ31-0.4Nd extruded tube |
DING Han-lin, WANG Tian-yi, LI Dian-kai, WANG Bao-ming |
3024 |
Heat transfer behaviors between metal and die during filling process of thin-wall aluminum alloy under high pressure die casting conditions |
ZHU Bi-wu, LI Luo-xing, LIU Xiao, ZHANG Li-qiang, XU Rong, BU Xiao-bing |
3031 |
Effect of Al content on non-dendritic microstructure of Mg-7Zn magnesium alloy |
FENG Kai, HUANG Xiao-feng, MA Ying, Lü Zheng, LI Xing-peng, HAO Yuan |
3039 |
Friction stir welding process of 6061-T4 aluminum alloy T-joints |
HOU Xiao-peng, YANG Xin-qi, CUI Lei, ZHOU Guang |
3048 |
Effect of cold deformation and annealing on intergranular corrosion property of 5E06 aluminium alloy plates |
ZHANG Xin-ming, NIE Zuo-ren, HUANG Hui, WENG Sheng-ping, GAO Kun-yuan |
3056 |
Evolution of texture and microstructure of 2E12 aluminum alloy during cold rolling and annealing |
WANG Bo, YI Dan-qing, CHEN Yu-qiang, WANG Bin, LI Ze-ying |
3064 |
Springback control and deformation analysis for electromagnetically assisted bending of U-shaped parts |
LIU Da-hai, ZHOU Wen-hua, LI Chun-feng |
3075 |
Wear-friction behavior of novel high aluminum bronzes alloy Cu-12Al-X in high temperature condition |
DAI An-lun, YAN Gao-chuang, ZHU Zhi-yuan, ZHU Kai, CHEN Hui, NIU Wen-ming |
3083 |
Dynamic recrystallization behavior of GH4742 superalloy |
ZHANG Yun, CAO Fu-rong, LIN Kai-zhen, LI Bao-mian, ZHOU Ge, DING Hua |
3091 |
Effects of solution temperature on microstructures and properties of 7B50 aluminum alloy |
LIU Jiao-jiao, WU Yue, LAI Yong-qiu, LI Hong-ying |
3100 |
Effect of cooling rate on microsegregation behaviors and mush zone stability of GH4169 alloy during solidification process |
ZHANG Mai-cang, CAO Guo-xin, DONG Jian-xin |
3107 |
Hot compression deformation of Cu-Cr-Zr-Ce alloy and processing maps |
ZHANG Yi, LI Rui-qing, XU Qian-qian, TIAN Bao-hong, LIU Ping, CHEN Xiao-hong, LIU Yong |
3114 |
Effect of TiC addition on oxidation behavior of TiC/316L composites and its mechanism |
LIN Shao-jiang, XIONG Wei-hao, SHI Qi-nian, WANG Sai-yu |
3121 |
Corrosion-wear resistant performance and mechanisms of tungsten and H13 steel in molten aluminum |
CHEN Wei-ping, FANG Si-cong, ZENG Yong, WU Jing, LUO Hong-feng |
3127 |
Functional Materials |
Densification process of cerium-based conversion coatings on AZ31 magnesium alloy |
XU Luo-min, WANG Xin, LEI Li, ZUO Ke |
3135 |
Effect of compound flux on microstructure and properties of TIG welded joints of AZ31 magnesium alloy |
PENG Jian, ZHU Xi, TONG Xiao-shan, PAN Fu-sheng |
3141 |
Effect of vacuum heat treatment on microstructure and property of NiCrAlY coating |
PENG Xiao-min, XIA Chang-qing, WU An-ru, DONG Li-jun, LI Dong-feng, TAO You-rui |
3147 |
Interfacial thermodynamics and impurity effects on internally oxidized Cu/Al2O3 interface |
JIANG Yong, LAN Guo-qiang, WANG Yi-ren, ZHOU Song-song |
3154 |
Influence of high magnetic field aging on microstructure and properties of Cu-Fe-Ag alloy |
LIU Ke-ming, LU De-ping, ZHOU Hai-tao, WEI Shi-yong, LIU Qiu-xiang, YU Jiu-ming |
3165 |
Microstructures and initial oxidation of Nb-Cr based coating systems |
LI Yue-qiao, LI Wei-zhou, LIU Hui-qun, YI Dan-qing, Albano CAVALEIRO |
3171 |
Preparation and characterization of polymer electrolyte P (VDF-HFP)/PVP by solvent evaporation method |
YUAN Yan, CHEN Bai-zhen, CHEN Ya |
3179 |
Effects of CeO2 addition on microstructure and high temperature oxidation resistance of siliconized coating |
WANG Hong-xing, LIU Bing-yi, YANG Shao-feng, ZHANG Yan |
3184 |
Effect of electrolyte component on low-temperature performance of LiFePO4 batteries |
LAI Jing-yuan, ZOU Zhong, XU Jun-yi, ZHANG Zhi-an, LAI Yan-qing, LI Jie, LIU Jin |
3189 |
Effect of Ni nanoparticles on soldering interfacial microstructure during aging treatment |
GAN Gui-sheng, DU Chang-hua, XU Hui-bin, GAN Shu-de, WANG Wei-sheng, LI Zhen-kang, LIU Bin |
3196 |
Monte Carlo simulation for precipitation and growth behaviors in supersaturated liquid |
ZHANG Xiao-yong, LIU Shao-sheng, BAO Yin-xiang, LI Xiao-bin, ZHOU Ke-chao |
3202 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Effect of Mg content on inclusions and microstructure of steel by Ti-Mg complex deoxidation |
HU Chun-lin, SONG Bo, SONG Gao-yang, XIN Wen-bing, MAO Jing-hong |
3211 |
Separation properties of ion to cobalt and nickel in complexation-precipitation system |
HAN Xin-gang, XI Xiao-li, MA Li-wen, NIE Zuo-ren, ZHOU Zhi-li |
3218 |
Surface modification of chalcopyrite in presence of moderately thermophilic bacteria |
WANG Jun, ZHAO Hong-bo, LI Si-qi, YANG Xie, YANG Cong-ren, QIN Wen-qing, QIU Guan-zhou |
3225 |
Numerical simulation of flotation bubble motion in suspension fluid |
PENG Xiao-qi, CHEN Si-chao, SONG Yan-po, LIU Tao |
3232 |
Growth behavior of metal iron grain during direct reduction of low grade hematite |
ZHU De-qing, XIAO Yong-zhong, CHUN Tie-jun, PAN Jian |
3242 |
Reduction behavior of Panzhihua pre-oxidized ilmenite by hydrogen |
WEI Xue-mei, LU Xiong-gang, XIAO Wei |
3248 |
Preparation of manganese tetroxide with lime milk |
YANG Zhi-chao, FENG Ya-li, LI Hao-ran, LIU Xin-wei, WANG Wei-da, ZHOU Yu-zhao, TENG Qing |
3254 |
Chemical mechanism for silicon chemical vapor deposition in SiCl4-Zn system |
XIE Gang, HOU Yan-qing, SONG Dong-ming, LIN Yan, CUI Yan |
3260 |