Structural Materials |
Effects of deformation temperature on deformation behavior of AZ31 magnesium alloy during equal channel angular pressing |
REN Guo-cheng, ZHAO Guo-qun |
1789 |
Dynamic recrystallization behaviors of twin-roll cast AZ31 magnesium alloy during high temperature tensile deformation |
SHI Guo-dong, QIAO Jun, HE Min, ZHANG Qing-feng, ZHANG Yong-bin, CHEN Min |
1796 |
Effect of Al on glass forming ability and thermal stability of Mg-Cu-Y alloys |
NING Xiang-mei, HUANG Jin-liang, JIA Shu-guo, YIN Biao, ZHANG Xing-yuan |
1805 |
Effects of Mg content on microstructure and mechanical properties of Al-Cu-Mg-Ag alloy |
SONG Yan-fang, PAN Qing-lin, FENG Lei, WANG Ying, LI Chen |
1812 |
Deposition mechanism of wastewater-free electroless nickel plating on magnesium alloy and corrosion resistance of Ni-P coating |
FANG Xin-xian, BA Zhi-xin, ZHEN Rui, WANG Zhang-zhong |
1819 |
Influence of extrusion ratio on microstructure and mechanical properties of Al matrix composites by hot extrusion of powders |
MA Guo-jun, DING Yu-tian, JIN Pei-peng, LIU Guo-long |
1826 |
Effects of Mg, Ag and Zn multi-alloying on aging behavior of new Al-Cu-Li alloy |
LUO Xian-fu, ZHENG Zi-qiao, ZHONG Ji-fa, ZHANG Hai-feng, ZHONG Jing, LI Shi-chen, LI Jin-feng |
1833 |
Effect of ultrasonic assisted friction stir welding on residual stress of welded joint |
YE Shao-yong, HE Di-qiu, YANG Kun-yu, ZHU Jian-ming, SU Bin, LAI Rui-lin |
1843 |
Microstructures and properties of 2099 Al-Li alloy |
LIN Yi, ZHENG Zi-qiao, LI Shi-chen, KONG Xiang, HAN Ye |
1848 |
Effect of Y on high temperature mechanical properties of AlSi7Cu2Mg alloy |
ZHANG Wen-da, YANG Jing, LIU Yun, DANG Jin-zhi, XU Hong |
1855 |
Quantitative metallography analysis of microstructure of BT25 titanium alloy deformed in two-phase field |
WANG Yang, ZENG Wei-dong, MA Xiong, ZHOU Jian-hua, WANG Xiao-ying, WANG Teng |
1861 |
Cyclic deformation characteristics of Ti-Ni-V shape memory alloy |
HE Zhi-rong, WANG Fang |
1866 |
Microstructure and properties of (Fe-Cr)(40)-Al(60) with tungsten concentrate powders by laser sintering |
LI Gang, HAN Feng, SHEN Yu, SHEN Jin-ze, WANG Yan |
1873 |
Aging kinetics of Cu-0.36Cr-0.03Zr alloy |
DING Zong-ye, JIA Shu-guo, DENG Meng, SONG Ke-xing, LIU Ping |
1879 |
Numerical simulation of extrusion molding of tungsten-based alloy powders based on linear D-P criterion |
LIU Wen-sheng, LIU Yuan-biao, MA Yun-zhu, BI Jia, ZHANG Jia-jia |
1885 |
Phase-field-crystal modeling for microcrack propagation and connecting of ductile materials |
GAO Ying-jun, LUO Zhi-rong, HUANG Li-lin, LIN Kui |
1892 |
Fretting wear behavior of Inconel690 /1Cr13 stainless steel in high-temperature air and nitrogen |
YE Yi, REN Ping-di, ZHANG Xiao-yu, GUO Hong, LI Chang-xiang |
1900 |
Functional Materials |
Interfacial reaction and shear strength of AuSn20/Ni solder joints |
WEI Xiao-feng, WANG Ri-chu, PENG Chao-qun, FENG Yan |
1907 |
Preparation and corrosion resistance of plasma electrolytic oxidation coatings on 2A97 aluminium-lithium alloy |
XUE Zhi-gang, CHENG Ying-liang, WU Xiang-quan, WU You-wu, LI jing-feng |
1914 |
Effect of bias voltage on microstructure and properties of magnetron sputtering TaN films |
XUE Ya-ping, CAO Jun, YU Li-hua, XU Jun-hua |
1923 |
Biocompatibility of electrochemical polished ultrafine-grained TiNi alloy |
XU Xiao-jing, ZHANG Ti-feng, LING Zhi-yong, SHENG Xin-lan, LIU Min, NIU Xiao-ya, ZHU Li-hua |
1931 |
Microstructure and micro-mechanical properties of zirconia coating by atmospheric pressure chemical vapor deposition |
HAO Zhen-hua, SUN Wei, XIONG Xiang, DAN Qi-shan, LI Jiang-hong |
1937 |
Microstructure and interface properties of plasma spray welded high Al bronze coating |
LI Wen-sheng, WANG Da-feng, DONG Hong-feng, CHU Ke, XU Er-dong, WANG Shuang |
1944 |
Phase-field simulation of reorientation kinetics of martensitic twin variants in Ni2MnGa alloy under external stress |
WAN Jian-feng, ZHANG Ji-hua, RONG Yong-hua |
1954 |
Novel technology for electroforming of W fiber-Ni composite coatings |
QIAN Wang-huan, QU Ning-song, ZHU Di |
1963 |
Crystal orientation and performance of laser directional cladding on DZ22 |
HU Bin, HU Fang-you, GUAN Ren-guo, HUANG Xu-ren |
1969 |
Preparation and supercapacitive characteristics of new carbon materials derived from furfuryl alcohol |
ZHAO Qing-lan, WANG Xian-you, JIANG Lan-lan, WU Hao, WU Chun |
1977 |
Preparation and electrochemical performance of IrO2 nanorods |
WANG Guang-jin, XU Tian, CHENG Feng, YU Yi, LIANG Cong, PAN Mu |
1985 |
Effect of H2O on microstructure of TiO2 aerogel with block size prepared by ambient pressure drying process |
LU Bin, ZHANG Ding-ri, SONG Miao, LU Meng-lei |
1990 |
Relationship between phosphorus doping concentration and electronic structure in anatase TiO2 |
ZHENG Shu-kai, WU Guo-hao, SU Jie, KANG Jian-nan, LIU Lei |
1996 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Finite element numerical simulation for GPR based on UPML boundary condition |
WANG Hong-hua, DAI Qian-wei |
2003 |
Purification process of low-grade complex molybdenite concentrate |
YANG Hong-ying, YU Juan, TONG Lin-lin, LUO Wen-jie |
2012 |
Experiment and mechanism analysis on leaching process of low grade copper sulfide intensified by ultrasonic wave |
WANG Yi-ming, WU Ai-xiang, AI Chun-ming |
2019 |
Research progress of synergistic solvent extraction of cobalt and nickel |
LI Xiao-hui, HUANG Song-tao, WEN Jian-kang, ZHOU Gui-ying |
2026 |
Flotation behavior and adsorption mechanism of cyclohexyl hydroxamic acid to wolframite |
HUANG Jian-ping, ZHONG Hong, QIU Xian-yang, WANG Shuai, ZHAO Gang, GAO Yu-de, DAI Zi-lin, LIU Guang-yi |
2033 |
Goethite deironization process for cobaltiferous bioleaching solution by central composite design |
LI Hai-jun, YANG Hong-ying, CHEN Guo-bao, ZHOU Li-jie, LIU Yuan-yuan |
2040 |
Recovery of Co and Li from spent lithium-ion batteries and their comprehensive utilization |
PAN Xiao-yong, PENG Ling, CHEN Wei-hua, WEI Ze-ping, LU Xiao, CHEN Zheng, WANG Jie |
2047 |
Reaction behavior of MgO in desilication process of sodium aluminate solution |
LIU Gui-hua, QI Tian-gui, TIAN Lü, ZHOU Qiu-sheng, PENG Zhi-hong, LI Xiao-bin |
2055 |
Mechanisms of extraction and separation of zirconium and hafnium by DIBK-P204 system |
XU Zhi-gao, WANG Li-jun, WU Yan-ke, CHI Ru-an, LI Pan-hong, YANG Hui-fang |
2061 |