Structural Materials |
Mechanical and damping properties of Mg-0.6%Zr alloy reinforced by quasicrystals |
MA Rong, DONG Xuan-pu, CHEN Shu-qun, CHENG Lu, FAN Zi-tian |
2705 |
Numerical simulation of effect rules of porthole axial angle on extrusion process of AZ31 Mg alloy thin-walled tube |
ZHANG Bao-jun, YANG He, GUO Liang-gang, SHI Lei, ZHENG Wen-da, GU Rui-jie, KOU Yong-le |
2713 |
Microstructures and mechanical properties of A6N01 aluminum alloy welding joint |
YANG Shang-lei, LIN Qin-lin |
2720 |
Effect of strain-induced precipitation on subsequent hot deformed microstructure of 7050 alloy |
LANG Yu-jing, CUI Hua, CAI Yuan-hua, ZHANG Ji-shan |
2726 |
High-cycle fatigue and crack initiation behavior of 7449 alloy |
ZHONG Shen, ZHENG Zi-qiao, ZHONG Li-ping, LI Hong-ping, WU Qiu-ping |
2734 |
Technology and mechanism of ultrasonic stir compound welding of aeronautical aluminum alloy |
HE Di-qiu, PENG Jian-hong, YANG Kun-yu, XU Shao-hua, WANG Jian, HE Shu-jun |
2743 |
Effect of primary α phase content on dynamic stress−strain behavior of TC4 ELI titanium alloy |
LIU Qing-hua, HUI Song-xiao, YE Wen-jun, WANG Guo, HU Guang-shan |
2749 |
Microstructures and mechanical properties of Ti-3Al-5Mo-4.5V titanium alloy for cold upsetting fasteners |
ZHANG Qing-lai, KUANG Yan-rui, HAN Yin-ben, HAN Wei-dong, FENG Tian-tian |
2756 |
Effect of heat transfer coefficient on measurement of friction factor in hot deformation of Ti-6Al-4V alloy |
TAO Huan, ZENG Wei-dong, ZHU Yan-chun, TAI Qing-an, LI Xiao-guang, LI Zhi-hua |
2762 |
Effect of applied stress combined with thermal cycling on plasticity of Mg2B2O5w/AZ31B composites |
JIN Pei-peng, ZHANG Fei, GUO Yan-hong, WANG Jin-hui, FEI Wei-dong |
2768 |
Effect of slurry pouring temperature on microstructure and mechanical properties of rheo-diecasting |
ZHAO Jun-wen, DAI Guang-ze, WU Shu-sen, HUANG Xing-min, HAN Jing |
2777 |
Transient liquid phase bonding between tungsten and stainless steel 316L |
YANG Zong-hui, SHEN Yi-fu, LI Xiao-quan, MENG Qing-bei |
2783 |
Microstructures of (TiB2-Al2O3)/NiAl composite prepared by in-situ reaction synthesis |
CAO Li-li, CUI Hong-zhi, WU Jie, TANG Hua-jie |
2790 |
AES analysis and pre-heat treatment of FGH96 superalloy powders |
LIU Jian-tao, ZHANG Yi-wen |
2797 |
Functional Materials |
Influence of rapid solidification on characteristics of Sn-6.5Zn solder alloy and mechanical properties of solder/Cu joints |
ZHAO Guo-ji, SHENG Guang-min, LUO Jun |
2805 |
Effect of silver alloy particle size on friction and wear properties of Ag-MoS2 composites |
WANG Xin-ping, XIAO Jin-kun, ZHANG Lei, ZHOU Ke-chao |
2811 |
Microwave sintering of W-Mo-Ni-Fe alloys |
ZHOU Cheng-shang, YI Jian-hong, ZHANG Hao-ze |
2818 |
TiN coated SiC composite powders produced by controlled hydrolysis |
ZHANG Lin, LU Xin, ZHAO Yu-qiang, QU Xuan-hui, HE Xin-bo, QIN Ming-li, ZHU Hong-min |
2825 |
Influence factors for stability behavior of Al2O3 suspension |
LIU Bing, PENG Chao-qun, WANG Ri-chu, WANG Xiao-feng, WANG Zhi-yong, LI Ting-ting |
2833 |
Preparation and properties of molybdenum disilicide composites coatings on surface of nickel-based alloy |
YAN Jian-hui, LI Yi-min, ZHANG Hou-an, TANG Si-wen, XU Jian-guang, LIU Long-fei |
2839 |
Thermodynamic of adsorption of indium on strong acidic cationic exchange fiber |
LI Ming-yu, ZENG Qing-xuan, LI Jian-bo, FENG Chang-gen |
2846 |
Preparation and bending property of novel copper/amorphous composite plate |
ZHANG Li, YANG Xiang-jie, LIU Yong |
2855 |
Kinetics of phase transformation of solution-treated Cu-Ni-Si alloy during aging treatment |
WANG Jun-feng, JIA Shu-guo, CHEN Shao-hua, LIU Ping, SONG Ke-xing, LIU Hong-xun |
2862 |
Computational Materials Scien |
Simulation of primary dendrite spacing in unidirectionally solidified alloy |
ZHANG Xian-fei, ZHAO Jiu-zhou |
2868 |
Phase diagram prediction of NaNO3-LiNO3-KNO3-H2O system as room temperature phase change materials |
YIN Xia, CHEN Qi-yuan, ZENG De-wen, DU Yong |
2875 |
Mine |
Development of screw structure without shaft for high-temperature mechanized charging and discharging in magnesium reduction process |
REN Ling, XIA De-hong, YE Yan |
2882 |
Technique of ferrum-removal by lead jarosite from sulfuric acid solution |
HE Jing, LUO Chao, TANG Mo-tang, LU Jun-yue, WANG Xiao-neng, WANG Tao |
2890 |
Separation of needle antimony from stibnite through low-temperature sulfur-fixing smelting process |
LIU Xiao-wen, YANG Jian-guang, WU Yong-tian, LI Jing, TANG Chao-bo, CHEN Yong-ming, TANG Mong-tang |
2896 |
Adsorption mechanisms of sodium oleate on surfaces of hematite and apatite |
FENG Qi-ming, ZHAO Yan-sen, ZHANG Guo-fan |
2902 |
Comparative analysis of primary aluminum and recycled aluminum on energy consumption and greenhouse gas emission |
DING Ning, GAO Feng, WANG Zhi-hong, GONG Xian-zheng |
2908 |
Alkali-roasting and desilication pretreatment of refractory high-silicon cobalt white alloy |
XU Zhi-feng, YUE Ri-hui, YAN Kang, WANG Cheng-yan |
2916 |
Adsorption model of phenol on activated carbon |
YOU Xiang-yu, YANG Jie, WANG Yun-yan, SU Yan-rong, CHAI Li-yuan, SHU Yu-de |
2924 |
Sulfur/iron oxidation activity of three typical bioleaching bacteria and sulfur speciation in bioleaching of chalcopyrite |
PENG An-an, TANG Lu, XIA Jin-lan, XIA Le-xian, ZHAO Xiao-juan, NIE Zhen-yuan, ZHU Wei |
2930 |
Thermodynamics of precipitation-coordination equilibrium in Fe2+-Ni2+-NH3-NH4+-C2O42−-H2O syste |
ZHANG Chuan-fu, YAO Yong-lin, ZHAN Jing |
2938 |
Separability of calcium from calcining magnesite by flotation and its mechanism |
YANG Zhi-chao, FENG Ya-li, LI Hao-ran, LIU Xin-wei, CAI Zhen-lei |
2944 |
Optimization of horizontal current in metal pad by using cathode with heightened collector bars in aluminum reduction cell |
YANG Shuai, LI Jie, XU Yu-jie, ZHANG Hong-liang, ZHANG He-hui, ZOU Zhong, LAI Yan-qing |
2951 |
Optimization of anode structure in aluminum reduction cells under low power consumption |
LI He-song, CAO Xi, TIAN Ying-fu |
2960 |
Kinetics of aluminum removal from metallurgical grade silicon with pressure leaching |
YU Zhan-liang, XIE Ke-qiang, ZHENG Ye-fang, CHEN Jia-hui, MA Wen-hui, XIE Gang |
2970 |
Isobaric heat capacity for NaOH-NaAl(OH)4-H2O ternary solutions system |
SONG ting, LIU Shi-jun, XIAO Liu-ping, CHEN Qi-yuan |
2977 |