Structural Materials |
Microstructure and room temperature formability of AZ31
magnesium alloy produced by differential speed rolling |
XIA Wei-jun, CAI Jian-guo, CHEN Zhen-hua, CHEN Gang, JIANG Jun-feng |
1247 |
Compression mechanism of AZ31B Mg alloy at low temperature |
LI Shu-mei, WANG Ming-pu, ZHANG Zhen, LI Zhou, TANG Ning, LEI Qian |
1254 |
Numerical simulation of semi-solid die casting process of
magnesium matrix composite |
HU Yong, HE Bo-lin, YAN Hong |
1260 |
Atomic bondings and properties of U1 andU2 phases of Al-Mg-Si alloy |
GAO Ying-jun, CHEN Hua-ning, WEI Na, WEN Chun-li, HUANG Chuang-gao |
1267 |
Effect of microstructures on fatigue crack propagation in
2E12 aluminum alloy |
YAN Liang, DU Feng-shan, DAI Sheng-long, YANG Shou-jie |
1275 |
Microstructures and mechanical properties of
soft-contact electromagnetic DC casting 7050 high-strength alloy ingot |
GUO Shi-jie, XUE Guan-xia, LIU Jin-yan, MA Ke, WANG Jia-chun, LI Ting-ju, CAO Zhi-qiang |
1282 |
Effect of electric field on kinetics of formation of S phase in2E12 aluminum alloy |
ZHOU Ming-zhe, YI Dan-qing, YIN De-yan, HONG Tian-ran, HUANG Dao-yuan |
1290 |
Modelling for flow stress and processing map of
7055 aluminum alloy based on artificial neural networks |
YAN Liang-ming, SHEN Jian, LI Zhou-bing, LI Jun-peng, YAN Xiao-dong, MAO Bai-ping |
1296 |
SiC/Al interface feature of Al-Fe-V-Si alloy reinforced with SiC particles |
HE Yi-qiang, WANG Na, QIAO Bin, FENG Li-chao, CHEN Zhi-gang, CHEN Zhen-hua |
1302 |
Characteristics of inertia radial friction welding joints of
small size T3/35CrMnSi dissimilar metal materials |
LUO Jian, SUN Yu, LIU De-jia, WU Wei, XU Xiao-ling |
1309 |
Preparation and tribological properties of C/C-SiC composites by
warm compacted-reactive melt infiltration process |
HAN Tuan-hui, XIAO Peng, LI Zhuan |
1316 |
Hot compression deformation behaviors and
microstructure evolution of GH625 Ni-based alloy |
WU Zhi-gang, LI De-fu |
1321 |
Effects of alloy states on recrystallization of
single crystal superalloy DD6 |
XIONG Ji-chun, LI Jia-rong, LIU Shi-zhong, HAN Mei |
1328 |
Microstructures and properties of Cu-Cr-Zr in-situ composites |
JIA Shu-guo, LIU Ping, SONG Ke-xing, CHEN Jiang-biao,CHEN Xiao-hong, TIAN Bao-hong, REN Feng-zhang |
1334 |
Functional Materials |
Effect of addition of Mg powders on foaming behaviors of Al foams |
WANG Lei, YAO Guang-chun, LUO Hong-jie, LIANG Li-si, ZHANG Zhi-gang |
1339 |
Effects of foaming pressure on microstructures and
properties of mesophase-pitch-derived carbon foams |
XIAO Feng, ZHANG Hong-bo, XIONG Xiang, LI Wan-qian, XIA Lun-gang |
1346 |
Depositing characteristic of 65%Zn-Al coatings produced by
cold gas dynamic spray |
LI Hai-xiang, SUN Ming-xian, LI Xiang-bo, WANG Hong-ren, HUANG Guo-sheng |
1353 |
Electric conductivities of ultrafine W-Cu materials |
ZHU Song, FAN Jing-lian, LIU Tao, TIAN Jia-min |
1360 |
Research progress in ceramic substrate material for
electronic packaging |
LI Ting-ting, PENG Chao-qun, WANG Ri-chu, WANG Xiao-feng, LIU Bing |
1365 |
Mechanical properties of single crystal copper and
polycrystalline copper during super plastic and cyclic deformation |
GUO Ting-biao, DING Yu-tian, XU Guang-ji, HU Yong |
1375 |
Synthesis and characterization of ZnO/TiO2-nanotubes photocatalyst |
ZHU Lei,DUAN Xue-chen,JIANG Bo, LIU Yang-lin,LIU Guo-cong, ZHANG Zhi-jian |
1382 |
Preparation and characterization of carbon fiber paper for
application of proton exchange membrane fuel cell |
XIE Zhi-yong, ZHANG Min, JIN Gu-ying, SU Zhe-an, ZHANG Ming-yu, CHEN Jian-xun, HUANG Qi-zhong |
1390 |
Influence of sintering process on Bi2O3 vaporization of
ZnO-Bi2O3 based varistor ceramics |
XU Dong, CHENG Xiao-nong, ZHAO Guo-ping, YAN Xue-hua, SHI Li-yi |
1396 |
LiFePO4/C nano-composites synthesized by
vacuum heat solid-phase method |
GUO Yong-xing, LI Xin-hai, WANG Zhi-xing, WANG Hong-qiang |
1402 |
Magnetostriction and amplitude-frequency characteristics of
cantilever beam structure Sm-Fe GMFs |
ZHOU Bai-yang, LEI De-hui |
1407 |
Surface modification and biomedical application of silica nanoparticles |
ZHAO Yan-zhong, YU Zhi-ping, ZHU Shai-hong, ZHOU Jian-da, HUANG Yan-yan,WANG Guo-hui, HUANG Dong, ZHOU Ke- |
1412 |
Mine |
Nitric acid oxidation leaching of cobalt from refractory
high-arsenic cobalt ores |
ZHENG Ya-jie, TENG Hao, YAN Hai-quan |
1418 |
Effect of irrigation rate and air flow rate on temperature distribution
of secondary copper sulfide during bio-heap leaching process |
LI Hong-xu, LI An, WU Ai-xiang, QIU Guan-zhou |
1424 |
Designing and testing of apparatus to measure matter’s
saturated vapor pressure in complex system |
FU Zhong-hua, ZHANG Yan-ling, WANG Yu-gang, LI Shi-qi, HAN Xian-hui |
1433 |
Electrodialytic treatment of wastewater produced in
vanadium extraction from stone coal |
BAO Shen-xu, ZHANG Yi-min, LIU Tao, CHEN Tie-jun |
1440 |