中国有色金属学报2003年第13卷第1期-《中国有色金属学报》官方网站|全网首发

您目前所在的位置：首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第13卷第1期 2003年2月

材料科学与工程
连续泡沫镍制造技术	戴长松，王殿龙，胡信国，姜兆华，吴宁，丁飞	1
AZ91镁铝合金中HCP/BCC相界面结构	肖晓玲¹，罗承萍¹，刘江文¹，吴东晓¹，聂建峰²， Barry C Muddle²	15
纯铝等径角挤技术(Ⅰ) ——显微组织演化	刘咏，唐志宏，周科朝，李志友	21
Sr+B联合熔体处理对Al-Si-Mg合金组织和力学性能的影响	廖恒成¹, 夏锦宏², 孙国雄¹	27
半固态铝合金铸件触变充型过程的模拟	杨卯生^{1, 2}, 徐宏¹, 毛卫民¹, 赵爱民¹, 钟雪友¹	35
Zn和RE对Mg-9Al合金热裂倾向性的影响	王业双, 王渠东, 马春江, 丁文江, 朱燕萍	40
Mn-Cu阻尼合金时效过程中晶体结构的变化	王丽萍，郭二军，姚秀荣，朱兴松	46
1400F轧机工作辊与冷却液之间的换热特性	尹凤福^{1, 2}, 李谋渭¹, 张大志¹, 刘鸿飞¹, 梁志远¹	51
异步轧制高纯铝箔冷轧织构沿板厚的分布规律	吕爱强，黄涛，王福，左良	56
防锈铝的充液拉深	徐永超, 康达昌	60
有限体积法模拟铝型材挤压成形过程	周飞，苏丹，彭颖红，阮雪榆	65
轧制镁合金超塑性和超塑胀形	于彦东^{1, 2}，张凯锋¹，蒋大鸣¹，郑海荣¹，王长丽¹	71
嵌入式化合物嵌锂电压的表达式	李志友，张晓泳，黄伯云，刘志坚，曲选辉	76
尖晶石型LiNi_xMn_2-xO₄锂离子正极材料的电化学性能	徐宁，刘国强，曾潮流，吴维涛	81
Al与Zn复合取代α-Ni(OH)₂的结构和电化学性能	陈惠¹，王建明¹，潘滔¹，肖慧明¹，张鉴清^{1, 2}	85
退火热处理对TiMn基储氢合金结构及性能的影响	黄太仲, 吴铸, 黄铁生, 倪君, 余学斌, 喻献国, 徐乃欣	91
Cu-25Al-3Mn形状记忆合金淬火态马氏体亚结构特征及其在加热过程中的变化	李周^{1， 2}，汪明朴¹，杨国涛¹，曹玲飞¹，张炳力³	96
不同材料模型的超弹TiNi合金法向接触的有限元分析	王立民¹，徐久军¹，严立¹，高玉周¹，潘新祥²，朱新河²，刘一梅²	100
合金化对非晶形成能力影响的电子理论计	张国英^{1， 2}, 胡壮麒²，张海峰²	106
ZrO₂基陶瓷的t—m马氏体相变异相界面电子结构	尹衍升^{1, 2}，谭训彦^{1, 2}，李嘉^{1, 2, 3}	111
PCA对机械合金化纳米粉末的SEM结构与成分分布均匀性的影响	范景莲，黄伯云，汪登龙	116
超声沉淀法制备纳米Al₂O₃粉体	陈雪梅¹, 陈彩风², 陈志刚²	122
溶胶-凝胶法制备PZT纳米晶反应机理	吴湘伟，段学臣，陈振华	127
预氧化处理对碳化硼陶瓷纳米磨损性能的影响	王零森¹, 吴芳²	132
碳化硼陶瓷的表面形貌和摩擦性能	吴芳¹, 王零森²	136
K40S钴基高温合金高温高周疲劳行为	杨富民, 孙晓峰, 管恒荣, 胡壮麒	141
枝晶凝固过程溶质再分配的数值模型和快速算法	陈福义，介万奇	147
全层状TiAl合金层片生长及其影响因素	刘文胜，黄伯云，唐建成，周科朝，贺跃辉，刘咏	153
工艺参数对SHS-铸造钢基表面TiC-Fe梯度复合涂层结构的影响	严有为¹，刘生发²，范晓明²，傅正义³，魏伯康¹	157
TiAl/40Cr扩散连接接头的界面结构及相成长	冯吉才，李卓然，何鹏，张秉刚	162
过滤电弧沉积的TiN/TiCrN/CrN/CrTiN 多层膜	李成明¹，张勇²，李桂英²，曹尔妍²，吕反修¹	167
Cu基体上抗原子氧侵蚀的Al₂O₃涂层	多树旺¹, 李美栓¹, 钱余海¹, 童靖宇², 孙刚²	172
Ti-6A-4V合金表面的热氧化/真空扩散处理	刘勇，杨德庄，何世禹，武万良	177
FGH95合金激光成形定向凝固显微组织与性能	冯莉萍，黄卫东，林鑫，杨海欧	181
Fe₃Al纳米粒子增强Al₂O₃陶瓷的制备及性能	龚红宇, 尹衍升, 郝春成, 刘英才, 王昕	188
TiC颗粒增强钛基复合材料的制备及其微观组织	郭继伟，金云学，吕奎龙，荣守范	193
工艺参数对制备CuO与Al反应自生Al₂O₃增强铝基复合材料的影响	马颖, 郝远, 寇生中, 鲁学年	198
强脉冲离子束辐照对Ni₃Al合金表面的改性	林义民¹，徐洮²，张洪涛³	205
熔融渗硅对二维编制炭/炭复合材料摩擦特性的影响	马运柱, 熊翔, 李江鸿, 黄伯云, 肖鹏, 黄启忠, 易茂中	211
7B04合金的断裂韧性	段玉波，唐剑，黄平，李成利，曾苏民	216
冶金 · 化学
磷酸盐对一水硬铝石和高岭石浮选的选择性作用	胡岳华，陈湘清，王毓华	222
Cu²+对Fe²+在T.f菌修饰粉末微电极上氧化行为的影响	李宏煦¹, 胡岳华², 邱冠周², 王淀佐^{1, 2}, 阮仁满¹	229
相似元素的深度分离	李洪桂, 赵中伟, 霍广生	234
铝电解槽电解质-铝液流动及铝液表面变形计算	吴建康¹, 黄珉¹, 黄俊², 姚世焕²	241
铝电解用改性预焙碳阳极实验室研究	叶绍龙，肖劲，杨建红，赖延清，邹忠，刘业翔	245
铝电解用TiB₂阴极涂层固化、炭化的升温制度	李庆余¹, 赖延清¹, 刘业翔¹, 陈柱², 林淋²	251
CaO-SiO₂-Al₂O₃-MgO-Na₂O-CrO_x炉渣中 铬氧化物间的氧化还原平衡	陈四红¹, 杨建¹, 薛向欣¹, 陈韧¹, 崔志英²	255
锌浸出渣挥发窑锍窑皮的物理化学特性及其形成机制	姚维义¹, 唐谟堂¹, 刘智能², 彭可¹, 杨声海¹, 何静¹	259
拜耳法生产氧化铝流程的物流对能耗的影响	刘丽孺^{1， 2}，陆钟武¹，于庆波¹，闫书明¹, 姜玉敬³，吕子剑³	265
铝酸钠和含硅铝酸钠溶液的红外光谱和拉曼光谱	王雅静^{1， 2}，翟玉春¹，田彦文¹，韩跃新¹，刘连利¹，姬生利²	271

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 13 No. 1 February 2003

MATERIALS SCIENCE AND ENGINEERING
Production technology of continuous nickel foam	DAI Chang-song, WANG Dian-long, HU Xin-guo,JIANG Zhao-hua, WU Ning, DING Fei	1
Structure of HCP/BCC interphase boundaries in AZ91 Mg-Al alloy	XIAO Xiao-ling, LUO Cheng-ping,LIU Jiang-wen,WU Dong-xiao, NIE Jian-feng, Barry C Muddle	15
Equal channel angular pressing process (ECAP) of pure Al(I) ——microstructure evolution	LIU Yong, TANG Zhi-hong, ZHOU Ke-chao, LI Zhi-you	21
Influence of combined melt treatment of Sr + B on microstructure and mechanical properties of Al-Si-Mg casting alloy	LIAO Heng-cheng, XIA Jinhong, SUN Guo-xiong	27
Filling simulation on semi-solid forming for aluminum casting	YANG Mao-sheng, XU Hong, MAO Wei-min,ZHAO Ai-min, ZHONG Xue-you	35
Hot-tearing susceptibility of Mg-9Al-xZn-yRE alloys	WANG Ye-shuang, WANG Qu-dong, MA Chun-jiang,DING Wen-jiang, ZHU Yan-ping	40
Crystal structure changes of Mn-Cu damping alloyat aging	WANG Li-ping, GUO Er-jun, YAO Xiu-rong,ZHU Xing-song	46
Convective heat transfer analysis between working rolland coolant fluid of mill 1400F	YIN Feng-fu, LI Mou-wei, ZHANG Da-zhi,LIU Hong-fei, LIANG Zhi-yuan	51
Textures distribution along thickness after cross shear rolling of high purity aluminum foils	LU Ai-qiang, HUANG Tao, WANG Fu, ZUO Liang	56
Hydro-mechanical deep drawing of alumite LF6	XU Yong-chao, KANG Da-chang	60
Simulation of aluminum material extrusion process with finite volume method	ZHOU Fei, SU Dan, PENG Ying-hong, RUAN Xue-yu	65
Superplasticity and superplastic bulging capability of rolled magnesium alloy	YU Yan-dong, ZHANG Kai-feng, JIANG Da-ming,ZHENG Hai-rong, WANG Chang-li	71
An expression for intercalation voltage of inserted compound	LI Zhi-you, ZHANG Xiao-yong, HUANG Bai-yun, LIU Zhi-jian, QU Xuan-hui	76
Electrochemical properties of LiNi_xMn_2-xO₄ as positive for lithium ion batteries	XU Ning, LIU Guo-qiang, ZENG Chao-liu, WU Wei-tao	81
Structure and electrochemical performance of Al and Zn co-substituted α-Ni(OH)₂	CHEN Hui, WANG Jian-ming, PAN Tao,XIAO Hui-ming, ZHANG Jian-qing	85
Effect of annealing on phase structure and performanceof TiMn-based hydrogen storage alloy	HUANG Tai-zhong, WU Zhu, HUANG Tie-sheng, NI Jun, YU Xue-bin,YU Xian-guo, XU Nai-xin	91
Twin substructure characteristics of martensite as-quenched in Cu-25Al-3Mn alloy and its change during aging	LI Zhou, WANG ming-pu, YANG Guo-tao,CAO Ling-fei, ZHANG Bing-li	96
FEM analysis of pseudoelastic TiNi alloy under normal contact using two material models	WANG Li-min, XU Jiu-jun, YAN Li,GAO Yu-zhou,PAN Xin-xiang, ZHU Xin-he, LIU Yi-mei	100
Electronic theory calculations of alloying effect to amorphous alloy forming ability	ZHANG Guo-ying, HU Zhuang-qi, ZHANG Hai-feng	106
Valence electron structure of t—m martensite phase transformation interface of ZrO₂-base ceramics	YIN Yan-sheng, TAN Xun-yan, LI Jia	111
Influences of PCA on morphology structure and elements homogeneity of mechanical alloyed W-Ni-Fe composite powders	FAN Jing-lian, HUANG Bai-yun, WANG Deng-long	116
Al₂O₃ nanopowder prepared by precipitation under ultrasonic radiation	CHEN Xue-mei , CHEN Cai-feng , CHEN Zhi-gang	122
Reaction mechanism of synthesizing PZT nano-crystalline powder by sol-gel process	WU Xiang-wei, DUAN Xue-chen, CHEN Zhen-hua	127
Influence of pre-oxidation treatment on nano wear properties of boron carbide ceramic	WANG Ling-sen, WU Fang	132
Nano tribology properties of boron carbide ceramic studied by atomic force microscope	WU Fang, WANG Ling-sen	136
High temperature high cycle fatigue behavior of K40S cobalt-base superalloy	YANG Fu-min, SUN Xiao-feng, GUAN Heng-rong,HU Zhuang-qi	141
Numerical model and rapid algorithm of solute redistribution in dendritic solidification	CHEN Fu-yi, JIE Wan-qi	147
Lamellae growth in fully lamellar TiAl alloys and its factors	LIU Wen-sheng, HUANG Bai-yun, TANG Jian-cheng, ZHOU Ke-chao,HE Yue-hui, Liu Yong	153
Effects of technological parameters on microstructure of TiC-Fe cermet graded composite coating on cast steel substrate by SHS casting route	YAN You-wei, LIU Sheng-fa, FAN Xiao-ming, FU Zheng-yi, WEI Bo-kang	157
Interface structures and phase growth of TiAl/40Cr diffusion bonded joint	FENG Ji-cai, LI Zhuo-ran, HE Peng, ZHANG Bing-gang	162
TiN/TiCrN/CrN/CrTiN multilayer hard coatings deposited by filtered cathode vacuum arc	LI Cheng-ming, ZHANG Yong, LI Gui-ying, CAO Er-yan, LU Fan-xiu	167
Protection of copper from atomic oxygen by copper-based Al₂O₃ coatings	DUO Shu-wang, LI Mei-shuan, QIAN Yu-hai, TONG Jing-yu, SUN Gang	172
Thermal oxidation/vacuum diffusion treatment on surface of titanium alloy	LIU Yong, YANG De-zhuang, HE Shi-yu,WU Wang-liang	177
FGH95 superalloy laser metal forming directional solidification	FENG Li-ping, HUNG Wei-dong, Lin Xin, YANG Hai-ou	181
Fabrication and properties of Fe₃Al nano-particle toughening Al₂O₃ matrix composites	GONG Hong-yu, YIN yan-sheng, HAO Chun-cheng,LIU Ying-cai, WANG Xin	188
Fabrication and microstructure of Ti-based composite reinforced by TiC particles	GUO Ji-wei, JIN Yun-xue, LU Kui-long, RONG Shou-fan	193
Influence of technical parameters on aluminum matrix composites in-situ reinforced by Al₂O_3p from reaction of CuO to Al	MA Ying, HAO Yuan, KOU Sheng-zhong, LU Xue-nian	198
Surface modification of Ni₃Al alloy by intense pulsed ion beams irradiation	LIN Yi-min, XU Tao, ZHANG Hong-tao	205
Influence of infiltrating Si on friction properties of two dimension weaving C/C composites	MA Yun-zhu, XIONG Xiang, LI Jiang-hong, HUANG Bai-yun, XIAO Peng, HUANG Qi-zhong, YI Mao-zhong	211
Fracture toughness of 7B04 aluminum alloy	DUAN Yu-bo, TANG Jian, HUANG Ping, LI Cheng-li, ZENG Su-min	216
METALLURGY AND CHEMISTRY
Influences of phosphates on diaspore and kaolinite flotation	HU Yue-hua, CHEN Xiang-qing, WANG Yu-hua	222
Influence of Cu²⁺ on oxidation of Fe²⁺ on thiobacillus ferroxidans modified powder microelectrode	LI Hong-xu, HU Yue-hua, QIU Guan-zhou, WANG Dian-zuo, RUAN Ren-man	229
Deep separation of resemble elements	LI Hong-gui, ZHAO Zhong-wei, HUO Guang-sheng	234
Computation of flow field of electrolyte-aluminium liquid and surface distortion of aluminum liquid in reduction cell	WU Jian-kang, HUANG Min,HUANG Jun, YAO Shi-huan	241
Laboratory study of modified prebaked carbon anodes for aluminum electrolysis	YE Shao-long, XIAO Jin, YANG Jian-hong, LAI Yan-qing, ZOU Zhong, LIU Ye-xiang	245
Heating program for solidification and carbonization of TiB₂ cathode coating in aluminum electrolysis	LI Qing-yu, LAI Yan-qing, LIU Ye-xiang, CHEN Zhu, LIN Lin	251
Redox equilibrium between chromium oxides in CaO-SiO₂-Al₂O₃-MgO-Na₂O-CrO_x molten slags	CHEN Si-hong, YANG Jian, XUE Xiang-xin,CHEN Ren, CUI Zhi-ying	255
Physicochemical properties and formation mechanism of zinc leaching residue volatile kiln	YAO wei-yi, TANG Mo-tang, LIU Zhi-neng, PENF Ke, YANG shen-hai, HE Jing	259
Influence of material flow in alumina manufacturing process with Bayer method on its energy intensity	LIU Li-ru, LU Zhong-wu, YU Qing-bo, YAN Shu-ming, JIANG Yu-jing, LU Zi-jian	265
Infrared and Raman spectra of aluminate and SiO₂-containing sodium aluminate solutions	WANG Ya-jing, ZHAI Yu-chun, TIAN Yan-wen, HAN Yue-xin,LIU Lian-li, JI Sheng-li	271

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW