MATERIALS SCIENCE AND ENGINEERING |
Monoatom control designing of disordered hcp TixAl(1-x) alloy |
XIE You-qing, PENG Kun, LIU Xin-bi, YANG Xin-xin |
205 |
Field-induced first order antiferromagnetism→ferromagnetism transitions in Gd1-xLaxMn2Ge2 (x=0.06,0.07) intermet |
GUO Guang-hua,WU Ye |
213 |
Deoxidation during vacuum induction melting of Ni-base superalloy |
NIU Jian-ping,SUN Xiao-feng, JIN Tao,YANG Ke-nu,GUAN Heng-rong,HU Zhuang-qi |
217 |
Formation mechanism of a high ductility TiAl-based alloy made by two-step heat treatment |
TANG Jian-cheng,HUANG Bai-yun,HE Yue-hui,ZHOU Ke-chao, LIU Wen-sheng,TANG Zhi-hong,LU Shi-qiang |
221 |
Influence of zirconium on ageing process in super-high strength aluminum alloy |
YANG Shou-jie, XIE You-hua, LU Zhen, SU Bin,DAI Sheng-long, YAN Ming-gao |
226 |
700℃ isothermal section of Ag-Pd-5Ru-Gd quaternary system phase diagram |
ZHANG Kang-hou,XU Yun,LI Qu-bo |
231 |
Preparation of hypereutectoid Ti-Cr alloys with Laves phase TiCr2 |
XIAO Ping-an,QU Xuan-hui,LEI Chang-ming,GAO Jian-xiang,ZHU Bao-jun,QIN Ming-li
236 |
|
Law for selecting interlayer in contact reactive brazing——Orientation of production of eutectic liquid in contact reaction |
DONG Zhan-gui,QIAN Yi-yu,MA Xin,SHI Su-qin |
241 |
Microstructure and superplastic-like deformation behavior of directionally solidified NiAl-Fe-Nb intermetallic alloy |
QI Yi-hui, GUO Jian-ting, CUI Chuan-yong |
245 |
Technique and property of heat resisting Al-Fe-V-Si alloys prepared by spray forming process |
XIONG Bai-qing, ZHU Bao-hong, ZHANG Yong-an, WEI Qiang,SHI Li-kai, SUN Yu-feng, SHEN Ning-fu |
250 |
Frictional and wear behaviors of C/C composites from carbon fibre cloth at different braking speeds |
XIONG Xiang,HUANG Bai-yun, XU Hui-juan,JI Dong-ying, PENG Jian-xin |
255 |
Effect of pre-impregnation on anti-oxidation of carbon/carbon composite for airplane brake disc |
YI Mao-zhong,GE Yi-cheng, PENG Chun-lan, HUANG Bai-yun |
260 |
Forgeability of 4XXX series Al alloys |
Chul-Min Lim, Young-cheol Jin |
264 |
Synthetical technique of high-efficient melt-treatment of aluminum and its effect |
FU Gao-sheng,CHEN Wen-zhe,QIAN Kuang-wu |
269 |
Effect of high density pulse current on solidification structure of hypereutectic Al-19Si alloy |
HE Shu-xian, WANG Jun, SUN Bao-de, ZHOU Yao-he |
275 |
Effect of coating on porosity of aluminum alloy casting in lost foam process |
WU Guo-hua,LIU Zi-li,LIU Man-ping,DING Wen-jiang,LUO Ji-rong |
279 |
Interfacial characteristic in (SiCw+B4Cp)/ Mg(AZ91) magnesium alloy composite |
JIN Tou-nan, NIE Zuo-ren,LI Dou-xing |
284 |
Effect of structure refining on heat-treated structures and mechanical properties in single crystal superalloy |
LI Jin-shan, ZHANG Wan-ming, KOU Hong-chao, LI Shuang-ming,ZHANG Feng-shou, HU Rui, LIU Lin, FU Heng-zhi |
290 |
Microstructure of casting ZA27 alloy |
CHEN Ti-jun,HAO Yuan,SUN Jun,DI Jie-jian |
294 |
Influence of electroless plating and nano-phase composite on electrode properties of Mg2Ni-based hydrogen storage alloys |
WANG Zhong-min, ZHU Min, PENG Cheng-hong,CHE Xiao-zhou, YANG Yong-qiang |
300 |
Steady and non-steady-state solidification mechanism of MC carbide |
CHEN Yao,WANG Hua-ming |
305 |
Thermal stability of synthetic properties of in-situ composite Cu-Cr alloy |
PENG Li-ming, MAO Xie-min, DING Wenjiang |
309 |
Interfacial bonding energy between coating and substrate for low-pressure plasma sprayed materials |
ZHU Qi-fang, SHAO Bei-ling, SUN Ze-ming, WANG Fu-sheng,YAO Wei, LI Dong-fei |
315 |
Microstructure of interfacial area between NiCoCrAlYHf overlay coating and substrate of alloy IC6A |
XIAO Cheng-bo, HAN Ya-fang, LI Shu-suo,SONG Jin-xia, LI Jian-ping |
319 |
Effect of compound layer on process and joint properties of Al contact eutectic reaction brazing |
YIN Shi-qiang, QIU Xiao-ming, SUN Da-qian |
323 |
Change of source cathode by double glow plasma |
XU Jiang,DONG Jian-xin,XIE Xi-shan,XU Zhong |
327 |
Structure and properties of WC-based hard metal coating by CVD |
GAO Jian,LI Jian-ping, MA Wen-cun, SHEN Bao-luo,GAO Sheng-ji, YI Yong |
331 |
Development of powder metallurgy TiAl-based alloy automotive exhaust valve |
OUYANG Hong-wu,LIU Yong,HE Yue-hui,HUANG Bai-yun |
334 |
Fracture behavior of 6066 aluminum alloy bomb casings |
LUO Bing-hui,BO Zhen-hai,SHI Guo-chang,JIANG Guo-jin |
338 |
Microstructural of sub-micron Al2O3 particles and interfacial characteristic of Al2O3p/1070Al composites |
JIANG Long-tao,WU Gao-hui,SUN Dong-li,ZHANG Qiang,Norio Kouno |
342 |
Synthesis of O′-Sialon powder by carbothermal reduction-nitridation |
YANG Jian,XUE Xiang-xin,LIU Xin,JIANG Tao,WANG Wenzhong |
347 |
In situ gradient composite of hypereutectic Al-Si alloy by centrifugal casting and its damping property |
TAN Yin-yuan |
353 |
Growth characteristics and controlling mechanism of nanometer CaCO3 |
LIN Rong-yi,ZHANG Jia-yun,ZHANG Pei-xin |
358 |
Performance description and design for P-type thermoelectric materials with large temperature span |
CUI Jiao-lin, ZHAO Xin-bing |
363 |
Characteristics of oxide film on 1420 Al-Li alloy surface |
LI Yan, DENG Ji-xiong, WEI Zuo-wei |
369 |
MINING, MECHANICAL ENGINEERIN |
Pseudo-random multi-frequency phase method and its application |
HE Ji-shan, LIU Jian-xin |
374 |
Study on predictable time scale of rock mass dynamic system using cell-mapping theory |
ZHOU Hui,FENG Xia-ting,TAN Yun-liang,WANG Yong-jia |
377 |
Elasto-plastic analysis of spherical cavity expansion with consideration of material dilatancy |
WEN Shi-you,CHEN Yun-min,LING Dao-sheng,LI Yue-jian |
383 |
Network method for dynamic modeling of complex shafting torsional vibration system |
HE Shang-hong,DUAN Ji-an |
388 |
Intelligent automatic control system of large-power EAF |
CHEN Jun-ling,LUO An,LI Zheng-guo,CHEN Rui-nuo |
393 |