Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第11卷    第z2期    2001年11月


运载工具的铝合金选材与焊接 王元良, 周有龙, 胡久富, 屈金山 1
NiTi形状记忆薄膜的应用及进展 吴廷斌, 江伯鸿, 漆  王睿 6
铝和铝合金的大气腐蚀研究现状 安百刚, 张学元, 韩恩厚, 李洪锡, 宋诗哲 11
微波焊接进展 李小路, 周  健 16
高强高导铜合金合金化机理 赵冬梅1,2, 董企铭2, 刘  平2, 金志浩1, 康布熙2 21
聚合物水基淬火介质的应用 陈春怀, 王  欣, 张文兴, 周敬恩 25
具有良好金属性能的层状三元碳化物和氮化物 朱教群1,2,梅炳初2,陈艳林2 29
一种新型的气体雾化制粉方法 陈   刚1, 陈振华1,  严红革1,  袁武华2 33
液态金属快速凝固过程的PFM模型 王 君, 孙加林 37
退火加热过程对高压电解电容器阳极铝箔立方织构的影响 徐  进, 毛卫民, 冯惠平, 舒龙卫 42
热型连铸锌铝合金的缺陷形成与机理 马   颖1, 郝  远1,阎峰云1, 刘洪军2 47
TiC对喷射沉积Al-8Fe-1.3V-1.7Si合金显微组织和 性能的影响 孙玉峰1,2,沈宁福2, 熊柏青3,张永安3,  袁  新2 54
稀土对Zn-Al共晶合金超塑性的影响 石志强1,2,叶以富3,1, 李世春2,王焕荣1, 滕新营1 60
液-固挤压SiCp/LY12复合材料的组织与性能 齐乐华, 李贺军, 孙乐民, 史忠科 64
铝/飞灰颗粒复合材料液相烧结过程的反应性 张雄飞, 王达健,谢  刚,  陈书荣,  崔  衡 68
快速凝固Al-Pb合金的显微组织 赵   莉1,  孙玉峰2,  沈宁福1 72
半固态复合熔铸过程中SiC与2A11合金的润湿性 孟宪云, 张峻巍, 陈彦博, 温景林 77
多孔铝合金的压缩应力-应变特征及能量吸收性能 郑明军,何德坪,   陈  锋 81
Al2O3-SiO2/ZL108复合材料的高温磨损性能 彭开萍, 陈文哲,   钱匡武 86
ZL101合金的变质 张静武1,李  慧1, 孟显哲1, 刘春海2 91
Al-Zn对称成分Spinodal分解合金的组织、结构与相成分 王大鹏, 郝士明, 赵   刚, 李洪晓 95
钇及铈镧混合稀土对AZ91镁合金铸态组织的影响 张诗昌, 魏伯康,  林汉同, 王立士 99
颗粒成形Al-Pb合金板材的微观结构与力学性能 邓运来, 张新明,  娄燕雄,  刘贵材 103
提高6063铝合金强度途径的探讨 钟建华, 饶    克, 付群强, 张建新 107
多晶与单晶铜塑性变形行为的相关性 黄晓旭1,蔡大勇1, 刘  庆2, 姚  枚1 110
双态组织TiAl基合金拉伸塑性的断裂力学 郑瑞廷, 郭富安, 张永刚, 陈昌麒 114
热压金刚石工具材料及其致密化 邹庆化1,汤凤林2,杨凯华2,段隆臣2, 胡国荣3,孙立鹏4 119
Fe2O3-MnO2-CuO-Co2O3体系红外辐射材料的 微波合成与表征 徐  庆1,2,  陈  文1,2,  张  枫2, 袁润章1 127
Zn基合金中CuZn4化合物在SiC颗粒上的形成机理 谢敬佩, 祝要民, 王文焱, 李晓辉, 李洛利 131
稀土La和Y在FeCrAl合金中的存在形式 陈 颖, 聂祚仁, 周美玲, 左铁镛 135
纳米Fe粉制备的高性能NdFe10.5Mo1.5Nx氮化物 杨红川, 张久兴, 周美玲, 左铁镛 139
钌对铂合金接点材料抗熔焊性能的影响 邓忠民, 吕贤勇, 施  安,  刘建良,  谢  明 143
过偏晶合金Ni-40%Pb深过冷凝固组织 郑红星, 陈倬麟, 郭学锋 148
二元黄铜表面色的定量研究 张玉平1,2,张津徐1,  吴建生1, 梅品修3 152
低钴含硅LaNi5型储氢合金 吴福炜, 李重河, 黄铁生 156
钠硼硅酸玻璃与铝的阳极焊工艺及结合机理 张丽娜1,喻  萍1, 周  彤2, 米运卿1, 孟庆森1, 薛  锦1 160
电子辐照对CuZnAl形状记忆合金相变温度的影响 刘丽娟1,祖小涛2, 沈保罗1,卢铁城2, 林理彬2,霍永忠3 164
Al-Cu-Fe准晶及其晶体类似相与纯Mg的界面反应 徐   洲, 李志强, 王  硕 167
Mo2C+Mo涂层对C/Cu复合材料界面及浸渗的影响 胡  锐1, 李金山1, 李进学2, 周尧和1 172
离子轰击下高碳钢的脱碳对随后渗金属的影响 李忠厚1,刘小萍1, 赵金香1,高  原1, 徐   重1, 杨永富2
张文峰2
177
LY12铝合金三价铈盐溶液中成膜工艺 王  成, 江   峰, 林海潮 181
LY12铝合金表面氧化铝陶瓷层的生长过程 蒋百灵,白力静,   蒋永锋 186
羟基磷灰石生物涂层材料界面的电镜观察与分析 徐淑华1,3, 罗承萍1, 王迎军2 190
陶瓷相对锌铝基合金激光重熔区表面硬度的影响 严  彪1, 徐  政1,殷俊林2, 卢   斌3 195
微弧氧化减摩陶瓷层的生成及其影响因素 高殿奎1,姜桂荣1, 王玉林2 199
网状阴极法在碳钢表面沉积钽薄膜 窦瑞芬1,田林海1,2, 潘俊德1, 贺  琦1 203
Ti-2Al-2.5Zr合金N+离子注入表面XPS和XRD分析 王治国1,祖小涛1, 封向东1,牟云峰1, 林理彬1,李燕伶2
 黄新泉2
207
铝合金半固态感应加热的计算机模拟 张恒华, 许珞萍, 邵光杰 221
A356铝合金显微疏松与二次枝晶臂距的计算机模拟 杜  强, 王利明, 韩维新, 李殿中, 李依依 226

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 11    Special 2    November 2001


Selection and welding of aluminum alloy in vehicle WANG Yuan-liang, ZHOU You-long, HU Jiu-fu, QU Jin-shan 1
Advancement in application research on
NiTi shape memory thin films
WU Ting-bin, JIANG Bo-hong, QI Xuan 6
Research situation of atmospheric corrosion of
aluminum and aluminum alloys
AN Bai-gang, ZHANG Xue-yuan, HAN En-hou, LI Hong-xi, SONG Shi-zhe 11
Overview of microwave joining LI Xiao-lu, ZHOU Jian 16
Mechanism of alloying of copper alloy with high
strength and high electrical conductivity
ZHAO Dong-mei, DONG Qi-ming, LIU Ping, JIN Zhi-hao, KANG Bu-xi 21
Application of polymer quenchant CHEN Chun-huai, WANG Xin, ZHANG Wen-xing, ZHOU Jing-en 25
Layered ternary carbides and nitrides with
excellent metal properties
ZHU Jiao-qun, MEI Bing-chu, CHEN Yan-Lin 29
Novel gas atomization method for powder preparation CHEN Gang, CHEN Zhen-hua, YAN Hong-ge, YUAN Wu-hua 33
Phase-field model of rapid solidification process
of liquid alloy
WANG Jun, SUN Jia-lin 37
Influence of annealing process on
cube texture formation in aluminum foil
of high voltage anode electrolytic capacitor
XU Jin, MAO Wei-min, FENG Hui-ping, SHU Long-wei 42
Defect formation and mechanism of ZA alloy
made in continuous casting by heated mold
MA Ying, HAO Yuan, YAN Feng-yun, LIU Hong-jun 47
Effect of TiC particle on microstructure and
properties of spray formed Al-8Fe-1.3V-1.7Si alloy
SUN Yu-feng, SHEN Ning-fu, XIONG Bai-qing, ZHANG Yong-an, YUAN Xin 54
Effect of rare earth on superplasticity of
Zn-Al eutectic alloy
SHI Zhi-qiang, YE Yi-fu, LI Shi-chun, WANG Huan-rong, TENG Xin-ying 60
Microstructure and properties of SiCp/LY12 composite
prepared by liquid-solid extrusion process
QI Le-hua, LI He-jun, SUN Le-min, SHI Zhong-ke 64
Reactivity in liquid sintering process of
Al/fly ash particulate composites
ZHANG Xiong-fei, WANG Da-jian, XIE Gang, CHEN Shu-rong, CUI Heng 68
Microstructure of rapidly solidified Al-Pb alloys ZHAO Li,SUN Yu-feng, SHEN Ning-fu 72
Wettability of SiC and 2A11 alloy in
semi-solid casting process
MENG Xian-yun,ZHANG Jun-wei,CHEN Yan-bo, WEN Jing-lin 77
Compressive stress-strain behavior and
energy absorption capability  of
porous aluminum alloy
ZHENG Ming-jun, HE De-ping, CHEN Feng 81
High-temperature wear resistance of
Al2O3-SiO2/ZL108 composites
PENG Kai-ping, CHEN Wen-zhe, QIAN Kuang-wu 86
Modification of ZL101 alloy ZHANG Jing-wu, LI Hui, MENG Xian-zhe, LIU Chun-hai 91
Microstructure, structure and phase composition of
spinodal Al-Zn alloy with symmetrical composition
WANG Da-peng, HAO Shi-ming, ZHAO Gang, LI Hong-xiao 95
Effect of yttrium and mischmetal on
as-cast structure of AZ91 alloy
ZHANG Shi-chang, WEI Bo-kang, LIN Han-tong, WANG Li-shi 99
Microstructure and mechanical properties of
Al-Pb alloys in  process of achieving sheet from particles
DENG Yun-lai , ZHANG Xin-ming, LOU Yan-xiong , LIU Gui-cai 103
Discussion of improving 6063 aluminum alloy intension ZHONG Jian-hua,RAO Ke,FU Qun-qiang, ZHANG Jian-xin 107
Correlation of plastic deformation behavior
between polycrystalline and single crystal copper
HUANG Xiao-xu, CAI Da-yong, LIU Qing, YAO Mei 110
Fracture mechanics of tensile ductility of
TiAl alloy with duplex structure
ZHENG Rui-ting, GUO Fu-an, ZHANG Yong-gang, CHEN Chang-qi 114
Hot pressed sintered matrix composites for
 diamond tools and its densification
ZOU Qing-hua, TANG Feng-lin, YANG Kai-hua,DUAN Long-chen, HU Guo-rong, SUN Li-peng 119
Microwave synthesis and characterization of
Fe2O3-MnO2-CuO-Co2O3 system in
frared radiation materials
XU Qing, CHEN Wen, ZHANG Feng, YUAN Run-zhang 127
Formation mechanism of CuZn4 compound on
SiC particle in ZnAl27 composite
XIE Jing-pei, ZHU Yao-min, WANG Wen-yan, LI Xiao-hui, LI Luo-li 131
Form of rare earth elements of
La and Y in FeCrAl-RE alloys
CHEN Ying, NIE Zuo-ren, ZHOU Mei-ling, ZUO Tie-yong 135
High-performance NdFe10.5Mo1.5Nx nitrides
prepared by nano-sized Fe powder
YANG Hong-chuan, ZHANG Jiu-xing,ZHOU Mei-ling,ZUO Tie-yong 139
Effect of ruthenium on resistance to weld of
platinum alloys contact materials
DENG Zhong-min, LÜ, Xian-yong, SHI An, LIU Jian-liang, XIE Ming 143
Solidification structures in
deep-undercooled Ni-40%Pb hypermonotectic alloys
ZHENG Hong-xing, CHEN Zhuo-lin, GUO Xue-feng 148
Quantitative research on surface color of binary brass ZHANG Yu-ping, ZHANG Jin-xu,WU Jian-sheng,MEI Pin-xiu 152
Low cobalt LaNi5-type hydrogen storage
alloys containing silicon
WU Fu-wei, LI Chong-he, HUANG Tie-sheng 156
Techniques and mechanism of anodic bonding between
sodium borosilicate glass and aluminum
ZHANG Li-na, YU Ping, ZHOU Tong, MI Yun-qing, MENG Qing-sen, XUE Jin 160
Effect of electron irradiation on
transition temperature of
CuZnAl shape memory alloys
LIU Li-juan, ZU Xiao-tao, SHEN Bao-luo,LU Tie-cheng, LIN Li-bin, HUO Yong-zhong 164
Interfacial reaction of Al-Cu-Fe quasicrystal and
crystal approximates with pure magnesium
XU Zhou, LI Zhi-qiang, WANG Shuo 167
Effects of Mo2C+Mo coating on interface and
infiltration of C/Cu composite
HU Rui, LI Jing-shan, LI Jin-xue, ZHOU Yao-he 172
Decarbonizing of high-carbon steel under condition of
ion bombarding and its effect on surface alloying
LI Zhong-hou, LIU Xiao-ping, ZHAO Jin-xiang, GAO Yuan, XU Zhong, YANG Yong-fu, ZHANG Wen-feng 177
Conversion coatings technology for LY12 aluminum
alloy in trivalent cerium solution
WANG Cheng, JIANG Feng, LIN Hai-chao 181
Growth of alumina ceramic coatings on
aluminum matrix material surface
JIANG Bai-ling, BAI Li-jing, JIANG Yong-feng 186
Electron microscopic study on interfacial characterization
of hydroxyapatite biomaterial coating
XU Shu-hua,LUO Cheng-ping, WANG Ying-jun 190
Effect of Al2O3 phase on microhardness of laser
remelting area of Zn-Al based alloy
YAN biao, XU zhen, YIN Jun-ling, LU Bin 195
Formulation and influential factors of
micro-arc anti-frition ceramic layer
GAO Dian-kui, JIANG Gui-rong, WANG Yu-lin 199
Ta film synthesized in carbon steel substrate by
net-shape cathode sputtering method
DOU Rui-fen, TIAN Lin-hai,PAN Jun-de, HE Qi 203
XPS and XRD investigation on N+ ion
implantation into Ti-2Al-2.5Zr alloy
WANG Zhi-guo, ZU Xiao-tao, FENG Xiang-dong, MU Yun-feng,LIN Li-bin, LI Yan-ling, HUANG Xin-quan 207
Simulation on induction heating of
aluminum billets in semi-solid
ZHANG Heng-hua, XU Luo-ping, SHAO Guang-jie 221
Quantitative prediction of microporosity and
secondary dendritic arm spacing in A356 alloys
DU Qiang, WANG Li-ming, HAN Wei-xin, LI Dian-zhong, LI Yi-yi 226

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f_ysxb@163.com