Growth ofδ′phase in Al-Zn-Li-Mg-Cu-Zr alloy |
GU Yi-jie, WANG Li-jun, ZHOU Tie-tao, ZHANG Yong-gang, CHEN Chang-qi |
1 |
Effects of processing factors on microstructure of semi-solid LY11 alloy during single-roll shearing/cooling process |
GUAN Ren-guo, CHEN Yan-bo, WEN Jing-lin |
5 |
Influence of Zr on microstructures and properties of near-eutectic Al-Si casting alloys modified with Sr |
SUN Yu, LIAO Heng-cheng, SUN Guo-xiong |
9 |
Effect of SiO2 surface dopant on directed oxidation of molten aluminium alloy |
YUAN Sen, DU Ye-zhi, WANG Wu-xiao |
13 |
Cavity behaviors of 2091 Al-Li alloy during superplastic deformation induced by dynamic recrystallization |
LI Hai, LIU Zhi-yi, LEI Yi |
17 |
Effects of quenching rate on tensile properties and fatigue crack growth of sand casting Al-7Si-0.4Mg alloy |
WANG Ming-xing, LIU Zhi-yong, WANG Xue-qing,WENG Yong-gang, WANG Yun-tao |
23 |
Corrosion behaviors of LF6 Al-Mg alloy with different processing and surface treatment in deep seawater |
ZHAO Yue-hong, LIN Le-yun |
27 |
Effect of pre-deformation on microstructures of Al-Cu-Mg alloy aged at 463 K |
GU Yi-jie, CHEN Rong, ZHANG Yong-gang, HUANG Zheng, CHEN Chang-qi |
31 |
New technology of cavity and porosity predication for aluminum alloy casting |
XU Hong, CHENG Jun, ZHONG Xue-you |
34 |
Heat transfer coefficient during cooling water of continuous casting of aluminum alloy |
JIA Fei, JIN Jun-ze |
39 |
Compactibility of Ti50Al50 composite powders prepared by mechanical milling |
LI Xiao-qiang, HU Lian-xi, WANG Er-de |
44 |
Computer simulation of continuous extrusion forming process |
CHU Can-dong, PENG Ying-hong, RUAN Xue-yu |
48 |
Microcomputer systyem for hot-cracking testing of alloys |
WANG Ye-shuang, DING Wen-jiang, WANG Qu-dong |
52 |
Technique of producing ZA alloys by heated mold continuous casting |
MA Ying, HAO Yuan, YAN Feng-yun, LIU Hong-jun |
56 |
Effects of solidification and melt treatment on
microstructure and mechanical properties of cast ZA27 alloy① |
MA Ying(马 颖), CHEN Ti-jun(陈体军), HAO Yuan(郝 远), ZHANG De-liang(张德良) |
63 |
Effects of La on microstructures and mechanical properties of Zn-22%Al vibration damping alloy |
PANG Shao-ping, HUNAG Yuang-feng, SHI Yun-bao, ZHANG Chi-zhong, LIU Yuan |
68 |
Effect of RE on constituent phases of ZA27 alloy |
TAN Ying-yuan, YAN Han-fang |
72 |
Effect of lithium on solidification characteristics of pure copper |
ZHU Da-chuan, CHEN Jia-zhao, ZHOU Xiu-li,LI Ning, TU Ming-jing, ZHANG Zi-ming, HU Zhao-min |
75 |
Influence of chemical composition on corrosion resistance
of AZ91D magnesium alloy ingots① |
LIN Gao-yong(林高用), Peng Da-shu(彭大暑), ZHANG Hui(张 辉) |
79 |
Resistivity of cold deformed Cu-8~13Zn alloys and its restoring during annealing process |
LUO Feng-hua, YIN Zhi-min, WANG Ming-pu, ZUO Tie-yong |
83 |
Microstructure and properties of tungsten alloy deformed by hydrostatic extrusion |
ZHANG Zhao-hui, WANG Fu-chi, LI Shu-kui |
88 |
Micro-behavior of 90W, 93W tungsten alloy under impact dynamics |
JIAO Tong, ZHANG Bao-ping, ZHANG Hai-tao, LIU Chang-lin |
92 |
Characteristics of CuCr contact materials made by explosive sintering |
LI Jin-ping, LUO Shou-jing, JI Song, HU Wei-ye, GONG Zhao-hui |
98 |
Infiltration parameters of CuW pseudobinary alloy |
FAN Zhi-kang, LIANG Shu-hua, XIAO Peng |
102 |
Properties of rapidly solidified Cu-Cr alloys with high strength and high conductivity |
ZHANG Rui-feng, SHEN Ning-fu |
105 |
Effect of SiO2 and SiC on properties of Cu-Fe matrix sintered friction materials |
LIU Bo-wei, FAN Yi, ZHANG Jin-sheng, GAO You, WU Fang |
110 |
Preparation and electrochemical properties of low-Co AB5-type hydrogen storage alloys |
DEN Ling-feng, LI Xin-hai, XU Hong-hui,TAO Zhi-yong, HU Quang-yao |
114 |
Relationship between phase composition and corrosion resistance of Ni-Ti-Nb based shape memory alloys① |
DONG Zhi-zhong(董治中), LIU Wen-xi(刘文西), JIA Di(贾 堤), WANG De-fa(王德法) |
118 |
Phase structure and electrochemical properties of RENi3.95-xMnx Co0.75Al0.3( x =0~0.6) hydrogen storage alloys at higher |
GUO Rui, CHEN Li-xin, LI Shi-qun, LEI Yong-quan |
121 |
Effects of residual stress and dislocation on
tensile deformation behavior of SiCw/Al composites① |
HU Ming(胡 明), HU Jin(胡 津), FEI Wei-dong(费维栋), YAO Zhong-kai(姚忠凯) |
125 |
Fracture strain of SiC particulate reinforced aluminum alloy matrix composites |
CHENG Yu, GUO Sheng-wu, GUO Cheng, CHEN Jin-de |
129 |
Preparation of bimetal composite of ZAS35 zinc alloy/carbon steel |
GENG Hao-ran, ZHANG Hai-lin, CUI Hong-wei,ZHANG Yan-ning, TIAN Xian-fa |
134 |
Micro and interface structures of reaction synthesized TiCp/LY12composites |
MA Ming-zhen, ZENG Song-yan |
139 |
Effect of partial melting on superplasticity of
AlNp/6061Al composite① |
HAN Li-hong(韩立红), NIU Ji-tai(牛济泰), JIANG Da-ming(蒋大鸣) |
143 |
Al2O3 and Al3Ti reinforced composites prepared by exothemic dispersion synthesis technology |
ZHU He-guo, WU Sheng-qing, WANG Hen-zhi, WU Chang |
147 |
Effects of VC and TiC particles on mechanical properties and microstructure of Fe3Al-based alloys |
XU Wen-lei, SUN Yang-shan, DING Shao-song |
150 |
Effect of annealing on fly line structure and properties of titanium-steel explosive composite sheet |
ZHENG Yuan-mou |
154 |
Development of nickel alloys as HER cathodes for water electrolysis |
HAN Qing, WEI Xu-jun, LIU Kui-ren |
158 |
Process parameter design of semisolid continuous casting |
XING Shu-ming, ZENG Da-ben,HU Han-qi ,MA Jing, LI Ya-min |
163 |
Interface stability analysis of solid-state displacement reaction |
GAN Guo-you, SUN Jia-lin, CHEN Jing-chao, CHEN Yong-chong, YAN Ji-kang |
167 |
Fractal growth in Si3N4ceramics |
JIANG Jun, ZHU Chang-jun, GAO Ling, YANG Hai-tao |
172 |
Mathematical review about sintering mechanisms of interaction in Huadong sintering model |
XU Shi-meng, DING Hua-dong, LI Ying |
176 |
Deposition and properties of high quality (TiAl)N hard coatings |
LI Cheng-ming, ZHANG Yong, CAO Er-yan, XUE Ming-lun |
179 |
Microstructure and solute distribution of Fe-Cr-Si-B Cladding by plasma |
WU Yu-ping, LIU Hua, WANG Shu-yu |
183 |
Effects of compress argon arc plasma beam scanning on microstructure and composition of electroless Ni-P alloy layer |
LI Hui-qi, WU Yu-ping, Li Min |
187 |
Thermal analysis and crystallization kinetics of nanosized titania paritcles |
LIU He-zhou, CHEN Hong-yan, WU Ren-jie |
190 |
Corrosion resistance properties of duplex stainless steels welded joints |
QU Jin-shan, WANG Yuan-liang |
194 |
Mechanisms and studying means of Ni-P electroless plating |
ZHANG Chao-yang, WEI Xi-wen,ZHANG Hai-dong, LI Bing, YU Lin-xia |
199 |
Electroplating processes of solderable coatings from methanesulfonate bath |
YU Hai-yan, LIANG Cheng-hao, WANG Bing |
202 |
Hydrothermal synthesis and characterizations of boehmite powder |
ZHOU Qiu-sheng, LI Xiao-bin, XIONG Xiang, LIU Ye-xiang |
206 |
Mathematical model of deformation resistance of 30MnSiV steeL |
DAI Tie-jun(戴铁军), LIU Zhan-ying(刘战英),LIU Xiang-hua(刘相华), WANG Guo-dong(王国栋) |
210 |
Experimental study of fiber rigid-plastic bolt |
ZHANG Xiang-dong, ZHANG Shu-guang, LI Yong-jing |
213 |
Shear failure of free-free beam subjected toimpact by projectile at mid-span |
LIU Xu-hong, DONG Jun |
217 |