MATERIALS SCIENCE AND ENGINEERING |
Effect of α2 plates on deformation and fracture of fully lamellar TiAl alloys |
LU Yong-hao, ZHANG Yong-gang, QIAO Li-jie, WANG Yan-bing, CHEN Chang-qi, CHU Wu-yang |
1 |
Hot extrusion process of rapidly solidified hypereutectic
aluminumsilicon alloy powder |
ZHANG Da-tong, LI Yuan-yuan, LUO Zong-qiang, QIU Cheng |
6 |
Analysis of flowing state of aluminum plate in castrolling process with imitative flow function |
CUI Xiao-chao, WANG You-hong, LIU Cai, SHI Rong |
10 |
FEM analysis of solidification process in producing aluminum product through CASTEX technique |
CHEN Yan-bo, WEN Jing-lin |
15 |
Model for inlet film thickness in mixed-lubrication rolling |
SUN Jian-lin, KANG Yong-lin, ZHANG Xin-ming |
18 |
Frequency response of melt in aluminum electromagnetically continuous cast-rolling process |
ZHAO Xiao-lin, MAO Da-heng, LI Xiao-qian, HE Di-qiu |
22 |
Chopping-extrusion technique for making integral-fin tubes |
XIA Wei, WU Bin, TANG Yong, LI Yuanyuan |
27 |
Deformation structure and recrystallization behaviour of tensile strained copper |
HUANG Xiao-xu, CAI Da-yong, YAO Mei, LIU Qing, N. Hansen |
31 |
Influence of TiCp on solidification behavior of Zn-10Al alloy |
WANG Xiang, ZENG Song-yan, ZHANG Er-lin,WANG Li-ping |
36 |
ZrAl3(p)+Al2O3(p)/Al composites fabricated by reaction in system Al-ZrOCl2 |
ZHAO Yu-tao, SUN Guo-xiong |
41 |
Effects of pre-deforming and isothermal treatment on structural granular transformation of as-cast ZA27 alloy |
XIE Hui, XU Li-jun, YUAN Zhong-yue, ZHENG Hong-xing, GUO Xue-feng |
47 |
Effect of iron content on microstructure and internal friction of Al-Fe-Si alloy |
LUO Bing-hui, XIE You-qing |
51 |
Mechanical alloying of Ti/Al binary powders |
LI Xiao-qiang, HU Lian-xi, WANG Er-de |
55 |
Synthesis technology of AlON |
WANG Xi-dong, LI Wen-chao |
59 |
Interaction of particles in metal melt in centrifugal field |
YU Si-rong, REN Lu-quan, PANG Yu-ping |
63 |
Liquid separating behavior of Cu-Co alloys under deep supercooling |
SUN Zhan-bo, SONG Xiao-ping, HU Zhu-dong, YANG Sen,CAO Chong-de, WEI Bing-bo |
68 |
Structure and phase transformation for Co72.7C11.8Si15.5 magnetic alloy quenched at high temperature |
GU Zheng-fei, LIU Zheng-yi, ZENG De-chang, ZHONG Xi-chun, WEI Xing-zhao, LUO Cheng-ping |
74 |
A simple model for discharge capacity of Ti-Mn based alloys |
ZHANG Yong, GUO Sheng-wu, LIU Yong-ning |
79 |
Microstructure and electrochemical behaviors of melt-spinning alloy Ml(NiCoMnAl)5 |
WEN Ming-fen, TONG Min, CHEN Lian, WU Feng, CHEN De-min,SHAN Zhong-qiang, MA Rong-jun |
84 |
Effect of doping with rare earth Eu on electrocatalysis of metal oxide anode coating |
ZOU Zhong, LI Jie, DING Feng-qi, ZHANG Wen-gen,XIAO Jing, YE Shao-long, LIU Ye-xiang |
91 |
Thermodynamic properties of binary alloys of Zn-Mn and Zn-Ti |
LU Gui-min, LE Qi-chi, CUI Jian-zhong |
95 |
Density of Li-B alloy used for anode materials of thermal battery |
LIU Zhi-jian, QU Xuan-hui, LI Zhi-you, HUANG Bai-yun |
99 |
Characteristic of Ti in Ag-Cu-Ti filler in brazed joint of diamond |
SUN Feng-lian, FENG Ji-cai, LIU Hui-jie, QIU Ping-shan, LI Dan |
103 |
Corrosion behavior of commercially pure Ti and Ti6Al4V alloy in artificial body fluid |
GUO Liang, LIANG Cheng-hao, SUI Hong-yan |
107 |
Influence of remelting in furnace on microstructure of plasma sprayed WC+Ni base self-fluxing alloy coating |
XIANG Xing-hua, LIU Zheng-yi, CHEN Kang-nian, LI Shang-zhou |
111 |
Technology of microwave plasma chemical vapor deposition diamond coating upon WC-Co tools |
LIU Quan, ZHOU Jian, YU Wei-hua, LIU Gui-zhen |
116 |
Reliability of PbSnAg solder layer of power modules under thermal cycling in electronic packaging |
ZHANG Sheng-hong, WANG Guo-zhong, CHENG Zhao-nian |
120 |
MINERAL PROCESSING, METALLURGY AN |
Solution chemistry of flotation separation of diasporic bauxite |
HU Yue-hua, JIANG Hao, QIU Guan-zhou, WANG Dian-zuo |
125 |
Kinetics of acidolysis of rich titanium concentrate by H2SO4 |
WANG Ming-hua, DU Xing-hong, SUI Zhi-tong |
131 |
Corrosion inhibition of BTA and its derivative 4CBTA on copper electrode in 3% NaCl solution |
XU Qun-jie,ZHOU Guo-ding,LU Zhu,LIU Feng-ming,TIAN Zhong-qun,LIN Chang-jian |
135 |
Preparation and properties of nickel borate acylate |
LI Xiao-ru, WU Hai-ying, CHENG Ben-cheng |
140 |
Maturation of pyrite cinders and its mechanism |
ZHENG Ya-jie, CHEN Bai-zhen, GONG Zhu-qing, CHEN Wen-mi |
144 |
Low-chromate passive film modified with Ti(Ⅳ) ions |
LU Yan-ping, QU Zu-yu |
148 |
MINING AND ELECTROMECHANICAL ENGINE |
Drilling axial deviation mechanism and its control program for large-diameter blasthole rock-drilling |
WU Wan-rong, WEI Jian-hua, ZHANG Yong-shun, YANG Xiang-bi |
153 |
Expert system in identifying failure mode of hanging wall of room-and-pillar mining |
DIAO Xin-hong, FENG Xia-ting, YU Pei-yan, CAI Hong-qi |
157 |
Forecasting geotechnical engineering distortion with least square error forecasting method |
WANG Guo-hui, MA Li, YANG Teng-feng, HOU Yong-hui, LI Wei-guo |
162 |