Deformation behaviors in T2/QBe2 explosive cladding interface |
YANG Yang, AN Yu-long, WANG Bing-feng |
1259 |
Effect of deposition parameters on texture of TiN films deposited by filtered cathodc arc plasma |
ZHANG Yu-juan, WU Zhi-guo, ZHANG Wei-wei,LI Xin,YAN Peng-xun, LIU Wei-min, XUE Qun-ji |
1264 |
Interfacial microstructure and mechanical properties of induction brazing TiAl/40Cr joints |
LI Yu-long, FENG Ji-cai, HE Peng, YAN Jiu-chun |
1269 |
Computer simulation of microstructural evolution of microalloyed Al-4.0Cu-0.3Mg alloys |
CHEN Zhi-guo, LI Shi-chen, LIU Zu-yao, ZHENG Zi-qiao |
1274 |
Mechanisms of polycrystalline Cu thin films during nanoindentation creep |
WANG Fei, XU Ke-wei |
1281 |
Ceramics matrix composites thixofroming in pseudo-semi-solid state |
LUO Shou-jing, CHENG Yuan-sheng, DU Zhi-ming, YANG Zhong-qi |
1286 |
Inclusions decrease in recycling magnesium alloy with rare earths |
GUO Xu-tao, LI Pei-jie, ZENG Da-ben, LIU Shu-xun |
1295 |
Role of heat sink in gas tungsten arc welding with trailing spot heat sink for titanium alloy |
LI Ju, GUAN Qiao, SHI Yao-wu, GUO De-lun,DU Yu-xiao, SUN Yong-chun |
1301 |
Tribological behavior of Ti-Si-N coatings prepared by magnetron sputtering reactive deposition |
MA Da-yan, MA Sheng-li, XU Ke-wei, S. Veprek |
1308 |
Microstructure evolution of high Nb containing Ti3Al based alloy electron beam welding joints |
WU Hui-qiang, FENG Ji-cai,HE Jing-shan, ZHANG Bing-gang |
1313 |
Numerical simulation on influence of loading ways of powder on titanium powder compaction |
OUYANG Hong-wu, HE Shi-wen, WEI Jia, LIU Yong |
1318 |
Preparation and characterization of Ni/SDC for SOFC anodes by buffer-solution method |
CHENG Ji-gui, DENG Li-ping, XIA Yong-hong,ZHANG Ben-rui, MENG Guang-yao |
1324 |
Mechanism and efficiency of inclusion-removal in purifying molten metal by electro-flux method |
ZHONG Yun-bo, REN Zhong-ming, ZHANG Bang-wen,DENG Kang, XU Kuang-di |
1329 |
Microstructure and properties of in-situ synthesis of TiC particle reinforced composite coating by plasma cladding |
WU Yu-ping, LIN Ping-hua, WANG Ze-hua |
1335 |
Grain refinement for near-hypoeutectic Al-Si alloys |
SUN Yu, WU Zhen-ping,LIU Bing-yi, SUN Guo-xiong |
1340 |
Microstructure and properties of spray-deposited heat-resistant FVS0812 aluminum alloy at high temperature |
ZHAN Mei-yan, CHEN Zhen-hua, XIA Wei-jun |
1348 |
Microstructure and properties of Mg-8Zn-4Al-1Si-0.3Mn/-x/AlP alloy |
ZHANG Chun-xiang, GUAN Shao-kang, SHI Guang-xin, WANG Li-guo,WANG Jian-qiang, WANG Ying-xin |
1353 |
Simulation of thin-walled aluminum decoration part extrusion process with multi-stage finite volume method |
LI Da-yong, LUO Chao, ZHOU Fei, PENG Ying-hong |
1360 |
Effects of electric field annealing on microstructure and recrystallization texture of 3104 aluminum alloy sheets |
HU Zhuo-chao, ZHAO Xiang, ZUO Liang,WANG Fu, C. Esling |
1366 |
Densification process and properties of CuCr25 alloys from spray forming process |
ZHANG Yong-an, LIU Hong-wei, ZHU Bao-hong, XIONG Bai-qing,SHI Li-kai, ZHANG Ji-shan, XIA Xu-li |
1372 |
Formation and evolution of bubble in fabricating closed-cell aluminum foam |
LUO Hong-jie, YAO Guang-chun,ZHANG Xiao-ming, WEI Li, WU Lin-li |
1377 |
Sintering properties of nanometer 90W-7Ni-3Fe composite powder |
MA Yun-zhu, HUANG Bai-yun, FAN Jing-lian,XIONG Xiang, WANG Deng-long |
1382 |
TiC/Fe metal ceramic composite coating by reactive flame spray |
LIU Hui-yuan, HUANG Ji-hua, ZHANG Jian-gang |
1389 |
Synthesize of ultrafine YAG powders using crystallization method |
WEN Lei, SUN Xu-dong, MA Wei-min, XIU Zhi-meng |
1394 |
Friction properties of nanometer metal coatings prepared by ion beam enhanced deposition |
ZHANG Hui-chen, GAO Yu-zhou, SUN Chang-guo,LIU Sha, YAN Li |
1400 |
Influence of lubrication on tribology properties of C/C composites |
GE Yi-cheng, YI Mao-zhong, HUANG Bai-yun, LI Li-ya |
1405 |
Effect of hot forging on microstructure of TiAl alloy containing high Nb |
SU Xi-kong, LI Shu-suo, HAN Ya-fang, LI Zhen-xi,XU Xiang-jun, XU Li-hua,LIN Jun-pin, CHEN Guo-liang
1410 |
|
New type of silver-free contact material |
XIE Jian-quan, XIE Zhi-hua, HUANG He-ping |
1415 |
Effect of thermal rate treatment on as-cast microstructure and mechanical property of Al-Fe alloy |
ZHOU Zhen-ping, LI Rong-de, MA Jian-chao |
1420 |
Preparation of superfine powder of LaF3 by microwave method |
HAN Yuan-shan, TIAN Yan-wen, WANG Chang-zhen,WU Yu-feng,AN Shou-yong, ZHAI Yu-chun |
1426 |
Effect of high-frequency resistance heating on structure and mechanical properties of steel/Al cladding strip |
ZU Guo-yin, YU Jiu-ming, WEN Jing-lin |
1431 |
Quantum chemical calculation on properties of phenoxy acetic acids depressants |
ZHANG Jian-feng, HU Yue-hua,XU Jing, WANG Dian-zuo |
1437 |