Effect of substrate bias on high quality DLC films deposited by filtered cathode arc plasma |
YAN Peng-xun, LI Xiao-chun, LI Chun, LI Xin, XU Jian-wei |
987 |
Fillet-lifting phenomenon of wave soldering with Sn-Bi-Ag-Cu solder |
HE Peng, ZHAO Zhi-li, QIAN Yi-yu |
993 |
Filming mechanism of high-pressure gas atomization in state of ‘opened’ wake |
OUYANG Hong-wu, HUANG Bai-yun, CHEN Xin,YU Wen-tao, ZHANG Xin |
1000 |
Fuzzy neural network modeling of liquid-solid extrusion process for composite products |
QI Le-hua, SHI Zhong-ke, HE Jun-chao, LI He-jun |
1006 |
Influence of Zn content on microstructure and properties of spray-formed 7××× series aluminum alloys |
ZHANG Yong-an, ZHU Bao-hong, LIU Hong-wei,ZHANG Zhi-hui, XIONG Bai-qing, SHI Li-kai |
1013 |
Aseismic and vibration control of frame structures with CuZnAl SMA dampers |
SI Nai-chao, LU Song-hua, FU Ming-xi,WANG Xiao-dong, SHI Qiang-jun |
1019 |
Multi-phase field simulation of unidirectional solidification for binary eutectic alloys |
ZHU Yao-chan, YANG Gen-cang, WANG Jin-cheng,ZHAO Da-wen, FAN Jian-feng |
1026 |
Character of macroscopic shape deformation in Cu-base shape memory alloys |
LIN Xiao-ping, DING Kun-ying, DONG Yun, HAN Yong-mei |
1033 |
Effect and mechanism of different components of C/C-SiC composites on friction and wear behaviors |
XIAO Peng, XIONG Xiang, REN Yun-yun |
1040 |
Numerical simulation of single roller melt-spinning for solidification process of Cu-Cr alloy |
WANG You-hong, SUN Zhan-bo, SONG Xiao-ping |
1045 |
Joining of reaction bonded SiC ceramic using Ti3SiC2 powder as filler |
DONG Hong-ying, LI Shu-jie, HE Yue-hui |
1051 |
Structure and electrochemical properties of La0.8-xRExMg0.2Ni3.2Co0.6 hydrogen storage alloys |
TANG Rui, LIU Li-qin, LIU Yong-ning,YU Guang, ZHU Jie-wu, LIU Xiao-dong |
1057 |
Tribological behavior of carbon nanotubes composite coatings at different frictional combination |
CHEN Chuan-sheng, CHEN Xiao-hua, LI Shao-lu,ZHOU Ling-ping, LI De-yi, LI Xue-qian |
1062 |
Calculation on valence electronic structures of Al-Li alloy under earlier aging condition |
GAO Ying-jun, HUANG Chuang-gao, MO Qi-feng,LAN Zhi-qiang, LIU Hui, WEI Yin-yan |
1069 |
Effect of hardness of nano-sized abrasives on roughness of polished super-smooth surface |
CHEN Zhi-gang, CHEN Yang |
1075 |
Plastic deformation mechanism of magnesium alloys |
YU Kun, LI Wen-xian, WANG Ri-chu |
1081 |
Effect of surface modification of sub-micron Al2O3 particles by rare-earth on interfacial wettability of Al matrix composites |
YU Zhi-qiang, WU Gao-hui, JIANG Long-tao |
1087 |
Alloying effects on electronic structures of LaNi5-xAlx |
GAO Tao, QI Xin-hua, CHEN Bo |
1092 |
Rationality of FEA model in fluid fields of aluminum roll-casting |
ZHOU Ying, HUANG Ming-hui, ZHONG Jue |
1100 |
Roll-bonding technology of stainless steel/3003 aluminum alloy honeycomb sandwich panel |
ZU Guo-yin, FENG Ren-jie, WANG Ning,YU Jiu-ming, WEN Jing-lin |
1107 |
Simulation of electromagnetic purification by using high frequency magnetic field |
GUO Qing-tao, JIN Jun-ze, LI Ting-ju |
1112 |
Hydrous ZrO2 treated by spray drying method |
LIN Zhen-han, ZHANG Ling-xiu, WU Liang |
1118 |
Cu-Al-Nb shape memory alloys with low phase transformation temperature and broad hysteresis |
DONG Gui-xia, GU Nan-ju, MA Xiao-li |
1124 |
Rolling processing of spray co-deposition 7075/SiCp composite |
ZHANG Fu-quan, CHEN Zhen-hua, YAN Hong-ge,YUAN Wu-hua, TANG Shao-qiu, FU Jie-xing |
1131 |
Conductivity of Na2WO4-ZnO-WO3 molten salt system |
LI Yun-gang, ZHAI Yu-chun, WANG Na, LIANG Jing-long |
1139 |
Cluster models for effect of Al addition on glass forming ability of Cu-based amorphous alloys |
ZHU Jian, QI Min |
1145 |
Interface velocity-tracking numerical simulation method for multidimensional solidification problems |
WU Zhao-chun, LIU Ying-xue, YUAN An-min |
1149 |